View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 4 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
 Post subject: Suggested Mobo
PostPosted: Sun Dec 31, 2006 11:25 am 
Offline
Joined: Sat Feb 11, 2006 5:26 pm
Posts: 282
Location: Winnipeg - Canada
I have recently inherited a dead computer from a friend. It stopped booting and he didn't feel like troubleshooting it, so he went out and bought a new Core 2 Duo system.

I had the time (and the spare parts) to pull things apart and play detective to determine what was broken. Turns out the motherboard is the problem.

So I have spare HDs, 1.5GB of DDR RAM, a Case, and an AMD Socket 939 3800+ CPU.

I'd like to replace the 2400+ Socket A system that is currently serving as my backend and give my Mythbox a little more horespower to work with. I'm currently using an AGP GeForce 5200 (If I recall correctly) and would like to continue using it as it's done the job so far and I want to minimize the amount of money i'm going to shell out with this upgrade.

Can anyone suggest a good Socket 939 board that is AGP and not PCI-E? I've been in a few of the shops around town (Winnipeg) and it seems like things are getting pretty slim for socket 939 boards these days, anything that is out there is PCI-E. I'd like to have the mobo be the only piece of hardware I need to purchase to get this off the ground (I don't have or want to buy a PCI-E graphics card).

If there isn't a good choice for Socket 939/AGP that is still being manufactured and can be found (I'm fine with ordering from online) is there a PCI-E based board that has onboard video that is suitable?

I am running a setup with a backend (that is occassionaly used as a frontend - but not very often) a Knoppmyth Frontend, and 2 Xbox frontends. On the backend I am running svideo out to my TV and just using a pair of PC speakers tapped into the PC onboard sound for my audio. I run a pair of PVR 150 cards, so I would need a solution that still offers me two PCI slots.

Any help would be appreciated, Something that's Tier1 is of course preferable, but I'm not opposed to a small amount of tinkering if need be to get things working.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 31, 2006 1:03 pm 
Offline
Joined: Sat Feb 26, 2005 9:05 am
Posts: 160
Location: Ipswich, UK
There weren't a huge number of AGP 939 boards produced, as the introduction of 939 appeared about the same time as the introduction of PCI-E.

I think ebay might be your best bet here, I dropped 939 and AGP into an emay search and it came back with the ASUS A8V, an ASRock one that takes both AGP and PCI-E, and an Epox NF3.

Go for a nvidia board if you can, as they seem better supported than others.

_________________
Mephi
-----------
R5.5
Opteron 2.Ghz
1Gb Ram, 200Gb Maxtor PATA
Avermedia 771 DVB-T
Hauppauge Nova-S2 (waiting to be installed)
MS MCE2 Remote


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 31, 2006 1:16 pm 
Offline
Joined: Sun Sep 25, 2005 3:50 pm
Posts: 1013
Location: Los Angeles
You can try to find some of the boards on the KnoppMyth Wiki page

http://www.knoppmythwiki.org/index.php?page=MotherBoards

and also the discontinued mobos...

http://www.knoppmythwiki.org/index.php?page=DiscontinuedMotherboards

_________________
Mike
My Hardware Profile


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 03, 2007 4:14 pm 
Offline
Joined: Sat Feb 11, 2006 5:26 pm
Posts: 282
Location: Winnipeg - Canada
Thanks for the suggestions.... I think I"m gonnna look at picking up anAsus A8N-VM CSM and just run with the onboard video. There seems to have been trouble with this board in the past, but it sounds like things run well on this now.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: Bing [Bot] and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu