Just changed the Capture Card setup to /dev/dsp1 and it worked.
Bruce S.
| LinHES Forums http://forum.linhes.org/ |
|
| No Sound on Recording with WinTV Theater & SBLive[fixed] http://forum.linhes.org/viewtopic.php?f=2&t=13387 |
Page 1 of 1 |
| Author: | bruce_s01 [ Mon Jan 08, 2007 7:30 pm ] |
| Post subject: | No Sound on Recording with WinTV Theater & SBLive[fixed] |
I seem to be having problems in getting the sound recorded with a Hauppauge WinTV Theater and a Soundblaster Live! I'm able to play back sound from a DVD using Xine. The Line output from a VCR is connected to the Line Input on the Win TV card, The Line out phone plug is plugged into the Line Input of the sound card. Internally, the CD is connected to the CDIn and the CD passthough from the WinTV card is connected to Aux In. The Audio Device in the capture Card Setup is set to /dev/dsp, No audio rate sampling limit is set, volume is not set to be adjusted. In the Frontend, Audio Output device is set to /dev/dsp, passthough Output Device is set to Default. The mixer device is set to /dev/mixer and is set to PCM. Master mixer volume is set to 85, PCM mixer volume is set to 82. (as root) from lspci -v (other entries deleted) Code: 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at e8041000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at e8040000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 05) Subsystem: Creative Labs CT4620 SBLive! Flags: bus master, medium devsel, latency 64, IRQ 18 I/O ports at bc00 [size=32] Capabilities: [dc] Power Management version 1 00:0c.1 Input device controller: Creative Labs SB Live! Game Port (rev 05) Subsystem: Creative Labs Gameport Joystick Flags: bus master, medium devsel, latency 64 I/O ports at c000 [size=8] Capabilities: [dc] Power Management version 1 So looking for the sound modules: Code: root@homenet-pvr1:/home/bruce# lsmod |grep snd snd_bt87x 15844 0 snd_emu10k1_synth 10112 0 snd_emux_synth 36096 1 snd_emu10k1_synth snd_seq_virmidi 9728 1 snd_emux_synth snd_seq_midi_emul 9856 1 snd_emux_synth snd_seq_dummy 6916 0 snd_seq_oss 34048 0 snd_seq_midi 10400 0 snd_seq_midi_event 10240 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 50256 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_emu10k1 110016 1 snd_emu10k1_synth snd_rawmidi 22944 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_ac97_codec 94116 1 snd_emu10k1 snd_ac97_bus 6144 1 snd_ac97_codec snd_pcm_oss 42912 0 snd_mixer_oss 18176 1 snd_pcm_oss snd_pcm 69380 4 snd_bt87x,snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_seq_device 10508 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi snd_timer 22404 3 snd_seq,snd_emu10k1,snd_pcm snd_util_mem 7552 2 snd_emux_synth,snd_emu10k1 snd_hwdep 10884 2 snd_emux_synth,snd_emu10k1 snd 47588 15 snd_bt87x,snd_emux_synth,snd_seq_virmidi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep snd_page_alloc 11784 3 snd_bt87x,snd_emu10k1,snd_pcm soundcore 11360 1 snd root@homenet-pvr1:/home/bruce# and the bt modules Code: root@homenet-pvr1:/home/bruce# lsmod |grep bt dvb_bt8xx 16900 0 nxt6000 10884 1 dvb_bt8xx mt352 9988 1 dvb_bt8xx sp887x 10884 1 dvb_bt8xx dst_ca 16000 1 dvb_bt8xx dst 29320 2 dvb_bt8xx,dst_ca dvb_core 73640 2 dvb_bt8xx,dst_ca dvb_pll 16132 1 dvb_bt8xx cx24110 11396 1 dvb_bt8xx or51211 12932 1 dvb_bt8xx zl10353 8708 1 dvb_bt8xx lgdt330x 11676 1 dvb_bt8xx bt878 12792 2 dvb_bt8xx,dst snd_bt87x 15844 0 snd_pcm 69380 4 snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_bt87x bttv 167028 2 dvb_bt8xx,bt878 video_buf 23940 1 bttv firmware_class 11648 4 dvb_bt8xx,sp887x,or51211,bttv ir_common 28420 1 bttv snd 47588 15 snd_emux_synth,snd_seq_virmidi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_bt87x,snd_pcm,snd_seq_device,snd_timer,snd_hwdep compat_ioctl32 5248 1 bttv i2c_algo_bit 12296 1 bttv btcx_risc 8072 1 bttv tveeprom 17296 1 bttv snd_page_alloc 11784 3 snd_emu10k1,snd_bt87x,snd_pcm videodev 24960 1 bttv v4l2_common 23808 4 tuner,msp3400,bttv,videodev i2c_core 20864 18 nvidia,dvb_bt8xx,nxt6000,mt352,sp887x,dst,dvb_pll,cx24110,or51211,zl10353,lgdt330x,tuner,tvaudio,msp3400,bttv,i2c_algo_bit,i2c_piix4,tveeprom So it appears all the devices appear to be loaded. Extracted from dmesg: Code: piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xc000, speed 1217kHz Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 19 bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 19, latency: 64, mmio: 0xe8041000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 1-0050: Hauppauge model 37284, rev B421, serial# 5030941 tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 1-0050: audio processor is MSP3410D (idx 5) tveeprom 1-0050: has radio bttv0: Hauppauge eeprom indicates model#37284 bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found msp3400 1-0040: MSP3410D-C5 found @ 0x80 (bt878 #0 [sw]) msp3400 1-0040: MSP3410D-C5 supports nicam, mode is autodetect bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 1-0042: chip found @ 0x84 (bt878 #0 [sw]) tda9887 1-0042: tda988[5/6/7] found @ 0x42 (tuner) tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 19 bt878: AUDIO driver version 0.0.0 loaded So Looking at the /dev directory: Code: root@homenet-pvr1:/home/bruce# ls -l /dev/* |grep audio crw-rw---- 1 root audio 14, 14 Jan 8 00:16 /dev/admmidi crw-rw---- 1 root audio 14, 12 Jan 8 00:16 /dev/adsp crw-rw---- 1 root audio 14, 28 Jan 8 00:16 /dev/adsp1 crw-rw---- 1 root audio 14, 13 Jan 8 00:16 /dev/amidi crw-rw---- 1 root audio 14, 4 Jan 8 00:16 /dev/audio crw-rw---- 1 root audio 14, 20 Jan 8 00:16 /dev/audio1 crw-rw---- 1 root audio 14, 9 Jan 8 00:16 /dev/dmmidi crw-rw---- 1 root audio 14, 3 Jan 8 00:16 /dev/dsp crw-rw---- 1 root audio 14, 19 Jan 8 00:16 /dev/dsp1 crw-rw---- 1 root audio 14, 2 Jan 8 00:16 /dev/midi crw-rw---- 1 root audio 14, 0 Jan 8 00:16 /dev/mixer crw-rw---- 1 root audio 14, 16 Jan 8 00:16 /dev/mixer1 crw-rw---- 1 root audio 10, 135 Jan 8 00:16 /dev/rtc crw-rw---- 1 root audio 14, 1 Jan 8 00:16 /dev/sequencer crw-rw---- 1 root audio 14, 8 Jan 8 00:16 /dev/sequencer2 crw-rw---- 1 root audio 116, 0 Jan 8 00:16 controlC0 crw-rw---- 1 root audio 116, 32 Jan 8 00:16 controlC1 crw-rw---- 1 root audio 116, 4 Jan 8 00:16 hwC0D0 crw-rw---- 1 root audio 116, 6 Jan 8 00:16 hwC0D2 crw-rw---- 1 root audio 116, 8 Jan 8 00:16 midiC0D0 crw-rw---- 1 root audio 116, 9 Jan 8 00:16 midiC0D1 crw-rw---- 1 root audio 116, 10 Jan 8 00:16 midiC0D2 crw-rw---- 1 root audio 116, 24 Jan 8 00:16 pcmC0D0c crw-rw---- 1 root audio 116, 16 Jan 8 00:16 pcmC0D0p crw-rw---- 1 root audio 116, 25 Jan 8 00:16 pcmC0D1c crw-rw---- 1 root audio 116, 26 Jan 8 00:16 pcmC0D2c crw-rw---- 1 root audio 116, 18 Jan 8 00:16 pcmC0D2p crw-rw---- 1 root audio 116, 19 Jan 8 00:16 pcmC0D3p crw-rw---- 1 root audio 116, 56 Jan 8 00:16 pcmC1D0c crw-rw---- 1 root audio 116, 57 Jan 8 00:16 pcmC1D1c crw-rw---- 1 root audio 116, 1 Jan 8 00:16 seq crw-rw---- 1 root audio 116, 33 Jan 8 00:16 timer root@homenet-pvr1:/home/bruce# ls -l /dev/* |grep video crw-rw---- 1 root video 10, 175 Jan 8 00:16 /dev/agpgart crw-rw---- 1 root video 29, 0 Jan 8 00:16 /dev/fb0 crw-rw---- 1 root video 81, 64 Jan 8 00:16 /dev/radio0 crw-rw---- 1 root video 81, 224 Jan 8 00:16 /dev/vbi0 crw-rw---- 1 root video 81, 0 Jan 8 00:16 /dev/video0 So as you can see, there's nothing obvious here So scambling for some other info, I run aplay (which plays /usr/share/sounds/testing.wav OK) Code: root@homenet-pvr1:/home/bruce# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Live [SBLive! [CT4620]], device 0: emu10k1 [ADC Capture/Standard PCM Playback] Subdevices: 32/32 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 Subdevice #8: subdevice #8 Subdevice #9: subdevice #9 Subdevice #10: subdevice #10 Subdevice #11: subdevice #11 Subdevice #12: subdevice #12 Subdevice #13: subdevice #13 Subdevice #14: subdevice #14 Subdevice #15: subdevice #15 Subdevice #16: subdevice #16 Subdevice #17: subdevice #17 Subdevice #18: subdevice #18 Subdevice #19: subdevice #19 Subdevice #20: subdevice #20 Subdevice #21: subdevice #21 Subdevice #22: subdevice #22 Subdevice #23: subdevice #23 Subdevice #24: subdevice #24 Subdevice #25: subdevice #25 Subdevice #26: subdevice #26 Subdevice #27: subdevice #27 Subdevice #28: subdevice #28 Subdevice #29: subdevice #29 Subdevice #30: subdevice #30 Subdevice #31: subdevice #31 card 0: Live [SBLive! [CT4620]], device 2: emu10k1 efx [Multichannel Capture/PT Playback] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: Live [SBLive! [CT4620]], device 3: emu10k1 [Multichannel Playback] Subdevices: 1/1 Subdevice #0: subdevice #0 root@homenet-pvr1:/home/bruce# arecord -l **** List of CAPTURE Hardware Devices **** card 0: Live [SBLive! [CT4620]], device 0: emu10k1 [ADC Capture/Standard PCM Playback] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Live [SBLive! [CT4620]], device 1: emu10k1 mic [Mic Capture] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Live [SBLive! [CT4620]], device 2: emu10k1 efx [Multichannel Capture/PT Playback] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Bt878 [Brooktree Bt878], device 0: Bt87x Digital [Bt87x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Bt878 [Brooktree Bt878], device 1: Bt87x Analog [Bt87x Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@homenet-pvr1:/home/bruce# Aumix gives the list as follows, I manuipulated the Video and Line settings, but nothing is heard when recording or on playback. Code: Vol P
Bass Trebl Synth Pcm Spkr Line R Mic P CD P Pcm2 IGain Line1 P Digital1 PhoneIn P PhoneOut P Video P I'm scratching my head here, though I've got the feeling it's something really, really simple. Bruce S. This system: PIII 650MHz FC+Slocket, Gigabyte GA-6BXD, 768Mb, Dual channel ATA-100 PCI ATA HBA, 80Gb PATA HDD, LG GDR8161B DVD-ROM, LG GCE-8520B CD-RW, XFX GeForce FX5200, Hauppauge WinTV Theater, Intel Gigabit Ethernet, Creative Labs SB Live! KM R5E50. |
|
| Author: | bruce_s01 [ Sat Jan 13, 2007 9:17 am ] |
| Post subject: | |
Just changed the Capture Card setup to /dev/dsp1 and it worked.
Bruce S. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|