| LinHES Forums http://forum.linhes.org/ |
|
| Analog audio with two DVB cards http://forum.linhes.org/viewtopic.php?f=2&t=14064 |
Page 1 of 1 |
| Author: | ErikU [ Tue Feb 06, 2007 7:53 pm ] |
| Post subject: | Analog audio with two DVB cards |
I am running two DVB cards (PcHDTV5500 and a Dvico Fusion 5 gold). The both work ok, but seem to take a while to tune an analog channel after watching an ATSC channel (this doesn't happen under windows). My question is about using the analog tuners of both cards. Each card has a mini jack output to feed into the mobo audio input. When I view an analog channel the audio is routed from that mobo input. How can I use both analog tuners if there is only one audio input on the mobo? Is there a way to get the audio through the PCI bus? There must be a way to use two of these cards. |
|
| Author: | MetroMike [ Wed Feb 07, 2007 4:10 am ] |
| Post subject: | |
Hi Erik, Not all sound cards have this ability, but I know for sure the SB Live has multiple input channels. They are internal (i.e. the jacks are not on the outside of the case) and hence have a different connector. My WinTV PCI has this sort of jack, I have connected it to several of the inputs and all seemed to work fine for me. I imagine you should have no trouble connecting multiple capture cards to these various inputs - provided the DVB card has a compatible internal jack. Some of these alternate inputs are: TAD, Auxillary, CD, Line 2. Even a basic on-board sound card would likely do the trick so long as your DVB card has the jack I'm talking about - just use the CD jack on the motherboard as well as the line-in on the outside. |
|
| Author: | ErikU [ Thu Feb 08, 2007 12:58 am ] |
| Post subject: | |
That's a good idea, I will try one of the other inputs on the mobo,.. but how will myth know to switch to that input when using that particular tuner card? |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|