Hi!

I have a PVR-150 and a Kworld ATSC-110 in my myth box. I got the PVR-150 up and running fine, and the digital part of the ATSC-110 works fine as well. It's just that when I switch to the analog portion of the card inside of myth, it doesn't work. It just displays a bunch of fuzz...like it has no reception. I have a feeling that it's something stupid that I'm missing.

Just wondering if anybody has an idea.


Thanks!
Mike

Did you configure the analog tuner of the Kworld card in mythtv-setup and assign a lineup to the input? You would need to define both the digital and analog, the analog would be similar to the PVR-150 setup except I believe you would select "Analog V4L capture card".

That said, there are many posts on these forums (and elsewhere) indicating that the analog tuners on the HD cards don't produce very good images. I found this to be true with my Fusion HDTV Lite so I don't use the analog portion.

Thanks for the input...no punn intended. I will try this when I get home tonight.

I'm using the SVN version of mythtv, and when I setup the digital side of the KWorld card, there is a little box that allows you to setup the analog side as well. Maybe I will try to remove that and just 'add' another analog card and see what happens.


Thanks!

I'm still running R5D1 + .20, I wasn't aware of the additional setup option for the analog portion in the newer version. Hope I'm not sending you down a dead-end, but I don't think it could hurt to try.