| LinHES Forums http://forum.linhes.org/ |
|
| hdhomerun firmware http://forum.linhes.org/viewtopic.php?f=2&t=15500 |
Page 1 of 1 |
| Author: | silent1 [ Mon Jun 04, 2007 5:27 pm ] |
| Post subject: | hdhomerun firmware |
I need to upgrade my firmware, but am having troubles actually getting the firmware. How do I download it? When I run: hdhomerun_config <my device id> upgrade 20070512 It tells me "unable to open file 20070512". So my first guess was that the file wasn't there, so I tried to download through knoppmyth but have been unsuccessful. What do I need to do? Thanks! |
|
| Author: | slowtolearn [ Mon Jun 04, 2007 6:10 pm ] |
| Post subject: | |
Did you download the firmware file first? http://www.silicondust.com/trac.fcgi/wi ... re_upgrade http://www.silicondust.com/trac.fcgi/wiki/downloads EDIT: Hit "Submit" too quick. You'll need to wget the firmware first, then supply the full filename (and probably the path to the file) /EDIT |
|
| Author: | silent1 [ Mon Jun 04, 2007 6:28 pm ] |
| Post subject: | |
I've got it downloaded and upgraded, but I'm still getting the errors when scanning channels. Still getting: Timeout Scanning ATSC Channel ## -- no tables Any ideas? |
|
| Author: | slowtolearn [ Mon Jun 04, 2007 6:49 pm ] |
| Post subject: | |
silent1 wrote: I've got it downloaded and upgraded, but I'm still getting the errors when scanning channels. I don't have any, sorry. Don't have an HDHomeRun. What version of KM/MythTV are you using? AFAIK you need at least KM R5E50 - See http://mysettopbox.tv/phpBB2/viewtopic. ... =hdhomerun
Still getting: Timeout Scanning ATSC Channel ## -- no tables Any ideas? |
|
| Author: | silent1 [ Mon Jun 04, 2007 7:13 pm ] |
| Post subject: | |
Using R5F1. I can play DVDs, sound works, everything else seems good except for the actual tv part. |
|
| Author: | slowtolearn [ Mon Jun 04, 2007 7:33 pm ] |
| Post subject: | |
silent1 wrote: Using R5F1. I can play DVDs, sound works, everything else seems good except for the actual tv part. Off the top of my head I would double-check my labs.zap2it.com settings, as well as the Capture Card and Video Inputs settings in mythtv-setup. I know Martian has (had?) an HDHomeRun, as do others on these forums, so hopefully someone can help you out.
|
|
| Author: | silent1 [ Tue Jun 05, 2007 6:33 am ] |
| Post subject: | |
I'm pretty sure I've got all of that set up correctly. I haven't been able to find out too much about this problem, but what I have found seems to point to a software issue. I'm hoping I just missed something. Is there a way to manually enter the channels? Can I modify the channels.conf myself? |
|
| Author: | spalVl [ Tue Jun 05, 2007 9:59 am ] |
| Post subject: | |
Are you using QAM or ATSC? You find these directions? http://www.silicondust.com/forum/viewtopic.php?t=2317 With R5F1 will be able to skip a few steps because the HDHR is automatically detected and tuner/listing added during install. I used my Windows XP laptop to verify HDHR worked and install firmware, but I would assume the firware upgrade on Linux would require the file extension too? Code: hdhomerun_config <my device id> upgrade 20070512.bin
|
|
| Author: | silent1 [ Tue Jun 05, 2007 10:11 am ] |
| Post subject: | |
OTA ATSC as one input and Cox cable as the other. Yeah I followed those directions when I was setting it up. R5F1 found the HDHomerun on it's own and recognized it. If I run the dvb scan from a terminal I can get all the channels at 99%. So it finds them fine. But when I do a scan through mythtv-setup I get the "Timeout Scanning ATSC Channel ## - no tables" message. |
|
| Author: | grante [ Tue Jun 05, 2007 1:13 pm ] |
| Post subject: | |
silent1 wrote: I've got it downloaded and upgraded, but I'm still getting the
errors when scanning channels. Code: Timeout Scanning ATSC Channel ## -- no tables For what channel numbers? I get a whole slew of lines like that for channels above the highest allowed UHF channel (69). Apparently, MythTV tries to scan a bunch of illegal channels. At one point in history, UHF TV channels used to go up to 83, but channels 70-83 were reallocated to other uses many years ago. MythTV apparently doesn't know that. I just ignored the messages, and my HDHR seems to be working fine. |
|
| Author: | silent1 [ Tue Jun 05, 2007 2:05 pm ] |
| Post subject: | |
I get them for every channel, OTA and cable. What exactly does the "no tables" mean? Is there some disconnect between the channels and the database? |
|
| Author: | RichardBronosky [ Tue Jun 05, 2007 9:59 pm ] |
| Post subject: | |
Oh God, Please solve this!!! I got my HDHOMERUN for Christmas, but have yet to record or watch a single thing on it. I've watched a few minutes via VLC before the HDHOMERUN stops streaming and needs to be retargeted. I've tried debugging it with the assistance of Nick/Jafa but to this day... no HD. It's really sad. My wife is BEGGING for a TiVo. |
|
| Author: | silent1 [ Tue Jun 05, 2007 10:17 pm ] |
| Post subject: | |
Well right now I'm looking into manually creating the channels.conf. I've been trying to run the dvb scan script, but I'm getting this error: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory I feel like I'm so close to getting everything to work, yet so far! I guess the good thing is I'm learning a lot. But I'd sure like to be able to watch tv. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|