LinHES Forums :: View topic - Losing my mind

May 30 09:15:30 mythtv kernel: ivtv: ==================== START INIT IVTV ====================
May 30 09:15:30 mythtv kernel: ivtv: version 0.10.1 (tagged release) loading
May 30 09:15:30 mythtv kernel: ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1
May 30 09:15:30 mythtv kernel: ivtv: In case of problems please include the debug info between
May 30 09:15:30 mythtv kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
May 30 09:15:30 mythtv kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
May 30 09:15:30 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23415 based)
May 30 09:15:30 mythtv kernel: PCI: Found IRQ 11 for device 0000:01:09.0
May 30 09:15:30 mythtv kernel: PCI: Sharing IRQ 11 with 0000:01:0d.0
May 30 09:15:30 mythtv kernel: usbcore: registered new driver usbfs
May 30 09:15:30 mythtv kernel: usbcore: registered new driver hub
May 30 09:15:30 mythtv kernel: USB Universal Host Controller Interface driver v3.0
May 30 09:15:30 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
May 30 09:15:30 mythtv kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
May 30 09:15:30 mythtv kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 30 09:15:30 mythtv kernel: parport: PnPBIOS parport detected.
May 30 09:15:30 mythtv kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
May 30 09:15:30 mythtv kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
May 30 09:15:30 mythtv kernel: 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 30 09:15:30 mythtv kernel: Linux agpgart interface v0.101 (c) Dave Jones
May 30 09:15:30 mythtv kernel: ivtv0: Encoder revision: 0x02060039
May 30 09:15:30 mythtv kernel: ivtv0: Decoder revision: 0x02020023
May 30 09:15:30 mythtv kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
May 30 09:15:30 mythtv kernel: msp3400 0-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0)
May 30 09:15:30 mythtv kernel: msp3400 0-0040: MSP3435G-B6 supports radio, mode is autodetect and autoselect
May 30 09:15:30 mythtv kernel: saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
May 30 09:15:30 mythtv kernel: tveeprom 0-0050: Hauppauge model 48011, rev G410, serial# 2649783
May 30 09:15:30 mythtv kernel: tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
May 30 09:15:30 mythtv kernel: tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
May 30 09:15:30 mythtv kernel: tveeprom 0-0050: audio processor is MSP3435 (idx 10)
May 30 09:15:30 mythtv kernel: tveeprom 0-0050: has radio
May 30 09:15:30 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-250
May 30 09:15:30 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB)
May 30 09:15:30 mythtv kernel: ivtv0: Registered device video32 for encoder YUV (2 MB)
May 30 09:15:30 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB)
May 30 09:15:30 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB)
May 30 09:15:30 mythtv kernel: ivtv0: Registered device radio0 for encoder radio
May 30 09:15:30 mythtv kernel: tuner 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
May 30 09:15:30 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
May 30 09:15:30 mythtv kernel: PCI: Found IRQ 11 for device 0000:01:0a.0
May 30 09:15:30 mythtv kernel: ivtv: ==================== END INIT IVTV ====================

Author:	hd1080 [ Wed Jun 13, 2007 9:41 pm ]
Post subject:	Losing my mind - Video is garbled
I've been working on my KnoppMyth install for two weeks now and can't seem to get it to work. Just so you know, I'm using a PVR-250 that's probably about 6 years old. The problem is that I can't get a real picture at all. Basically all of my channels look the way that some channels look like when they're blocked by the cable company. You probably know what I mean - you can kind of see a picture, but the colors are off, little vertical hold, and it's an overall fuzzy picture. I've done everything on the troubleshooting page related to the BlackScreenWatchingTV. Nothing. I've got the latest KnoppMyth install, Linux v. 2.6.18, and upgraded to IVTV 0.10.3. I've tried changing the frequencies from STD to HRC to IRC. I've even hooked up an antenna, made the appropriate software adjustments. Still nothing. I've tried finetuning the channels. Some settings got a tad better, but most were only the same or worse. Does anybody have a clue what could be wrong? I'm starting to wonder if it's the card, but I don't have a functioning Windows desktop to double-check on at the moment.

Author:	tjc [ Thu Jun 14, 2007 6:36 am ]
Post subject:	Re: Losing my mind - Video is garbled
hd1080 wrote: I've done everything on the troubleshooting page related to the BlackScreenWatchingTV. So where did you post the information from the logs as described there? If you want help debugging a hardware problem we need that diagnostic information. That's why the BlackScreenWatchingTV page keeps referring you to the CheckingLogFiles page. The output of v4l2-ctl --all --list-ctrls would also be helpful.

Author:	hd1080 [ Thu Jun 14, 2007 8:50 am ]
Post subject:
I'll send these when I get home. What log files would you like? Some of the ones that are referenced in that link (which I've checked before) have a few thousand lines to them...

Author:	hd1080 [ Thu Jun 14, 2007 8:51 am ]
Post subject:
Also, how would I get the output of v4l2-ctl --all --list-ctrls? Sorry, I'm pretty new at this.

Author:	hd1080 [ Thu Jun 14, 2007 4:46 pm ]
Post subject:
The output of v4l2-ctl: Driver info: Driver name : ivtv Card type : Hauppauge WinTV PVR-250 Bus info : 0000:01:09.0 Driver version: 2563 Capabilities : 0x01070051 Video Capture VBI Capture Sliced VBI Capture Tuner Audio Radio Read/Write Format: Type : Video Capture Width/Height : 720/480 Pixel Format : MPEG Field : Interlaced Bytes per Line: 0 Size Image : 131072 Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601) Format: Type : Sliced VBI Capture Service Set : Service Line 0: / Service Line 1: / Service Line 2: / Service Line 3: / Service Line 4: / Service Line 5: / Service Line 6: / Service Line 7: / Service Line 8: / Service Line 9: / Service Line 10: / Service Line 11: / Service Line 12: / Service Line 13: / Service Line 14: / Service Line 15: / Service Line 16: / Service Line 17: / Service Line 18: / Service Line 19: / Service Line 20: / Service Line 21: / Service Line 22: / Service Line 23: / I/O Size : 0 Format: Type : VBI Capture Sampling Rate : 27000000 Hz Offset : 248 samples (9.18519e-06 secs after leading edge) Samples per Line: 1439 Sample Format : GREY Start 1st Field : 10 Count 1st Field : 12 Start 2nd Field : 273 Count 2nd Field : 12 Video input : 0 (Tuner 1) Audio input : 0 (Tuner 1) Frequency: 3380 (211.250000 MHz) Video standard = 0x0000b000 NTSC-M/M-JP/M-KR Tuner: Capabilities : 62.5 kHz multi-standard stereo lang1 lang2 Frequency range : 44.0 MHz - 958.0 MHz Signal strength : 99% Current audio mode : stereo Available subchannels: stereo lang2 User Controls brightness (int) : min=0 max=255 step=1 default=128 value=128 flags=slider contrast (int) : min=0 max=127 step=1 default=64 value=64 flags=slider saturation (int) : min=0 max=127 step=1 default=64 value=64 flags=slider hue (int) : min=-128 max=127 step=1 default=0 value=0 flags=slider volume (int) : min=0 max=65535 step=655 default=58880 value=58880 flags=slider balance (int) : min=0 max=65535 step=655 default=32768 value=32768 flags=slider bass (int) : min=0 max=65535 step=655 default=32768 value=32768 flags=slider treble (int) : min=0 max=65535 step=655 default=32768 value=32768 flags=slider mute (bool) : default=0 value=0 loudness (bool) : default=0 value=0 MPEG Encoder Controls stream_type (menu) : min=0 max=5 default=0 value=0 flags=update stream_vbi_format (menu) : min=0 max=1 default=0 value=0 audio_sampling_frequency (menu) : min=0 max=2 default=1 value=1 audio_encoding_layer (menu) : min=1 max=1 default=1 value=1 flags=update audio_layer_ii_bitrate (menu) : min=9 max=13 default=10 value=10 audio_stereo_mode (menu) : min=0 max=3 default=0 value=0 flags=update audio_stereo_mode_extension (menu) : min=0 max=3 default=0 value=0 flags=inactive audio_emphasis (menu) : min=0 max=2 default=0 value=0 audio_crc (menu) : min=0 max=1 default=0 value=0 video_encoding (menu) : min=0 max=1 default=1 value=1 flags=readonly video_aspect (menu) : min=0 max=3 default=1 value=1 video_b_frames (int) : min=0 max=33 step=1 default=2 value=2 flags=update video_gop_size (int) : min=1 max=34 step=1 default=12 value=15 video_gop_closure (bool) : default=1 value=1 video_bitrate_mode (menu) : min=0 max=1 default=0 value=0 flags=update video_bitrate (int) : min=0 max=27000000 step=1 default=6000000 value=6000000 video_peak_bitrate (int) : min=0 max=27000000 step=1 default=8000000 value=8000000 video_temporal_decimation (int) : min=0 max=255 step=1 default=0 value=0 spatial_filter_mode (menu) : min=0 max=1 default=0 value=0 flags=update spatial_filter (int) : min=0 max=15 step=1 default=0 value=0 flags=slider spatial_luma_filter_type (menu) : min=0 max=4 default=0 value=1 spatial_chroma_filter_type (menu) : min=0 max=1 default=0 value=1 temporal_filter_mode (menu) : min=0 max=1 default=0 value=0 flags=update temporal_filter (int) : min=0 max=31 step=1 default=0 value=8 flags=slider median_filter_type (menu) : min=0 max=4 default=0 value=0 flags=update median_luma_filter_minimum (int) : min=0 max=255 step=1 default=0 value=0 flags=inactive slider median_luma_filter_maximum (int) : min=0 max=255 step=1 default=255 value=255 flags=inactive slider median_chroma_filter_minimum (int) : min=0 max=255 step=1 default=0 value=0 flags=inactive slider median_chroma_filter_maximum (int) : min=0 max=255 step=1 default=255 value=255 flags=inactive slider

LinHES Forums http://forum.linhes.org/

Losing my mind - Video is garbled http://forum.linhes.org/viewtopic.php?f=2&t=15608	Page 1 of 1

Author:	hd1080 [ Thu Jun 14, 2007 4:56 pm ]
Post subject:
From dmesg: Linux version 2.6.18-chw-13 (root@mythtv) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Tue Mar 6 19:57:00 PST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable) BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65472 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 61376 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000ff980 ACPI: RSDT (v001 GATEWA EA81510A 0x20000707 MSFT 0x00001011) @ 0x0fff0000 ACPI: FADT (v001 GATEWA EA81510A 0x20000707 MSFT 0x00001011) @ 0x0fff1000 ACPI: BOOT (v001 GATEWA EA81510A 0x20000707 MSFT 0x00001011) @ 0x0fff4000 ACPI: DSDT (v001 GATEWA N0CPP058 0x00000012 MSFT 0x0100000b) @ 0x00000000 ACPI: BIOS age (2000) fails cutoff (2002), acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 20000000 (gap: 10000000:efb80000) Detected 797.398 MHz processor. Built 1 zonelists. Total pages: 65472 Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent nomce apm=power-off quiet bootsplash: silent mode. Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0120a000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 252784k/261888k available (4292k kernel code, 8712k reserved, 1348k data, 268k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1595.45 BogoMIPS (lpj=797728) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 20k freed CPU0: Intel Pentium III (Coppermine) stepping 06 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 111k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f2830 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x20da, dseg 0xf0000 PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO Boot video device is 0000:02:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0 pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:09: ioport range 0xcf8-0xcff could not be reserved pnp: 00:0b: ioport range 0x800-0x87f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fca00000-feafffff PREFETCH window: e4700000-f47fffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fc900000-fc9fffff PREFETCH window: dc600000-e46fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 98304 bytes) TCP bind hash table entries: 4096 (order: 3, 49152 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) audit(1181825175.479:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 1975, nTxLock = 15807 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered vesafb: framebuffer at 0xe8000000, mapped to 0xd0980000, using 3750k, total 131072k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:e340 vesafb: pmi: set display start = c00ce376, set palette = c00ce3e0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 45842 bytes,<6>...found (800x600, 21500 bytes, v3). Console: switching to colour frame buffer device 75x24 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. PCI: setting IRQ 9 as level-triggered PCI: Found IRQ 9 for device 0000:01:0b.0 PCI: Sharing IRQ 9 with 0000:00:1f.4 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:01:0b.0: 3Com PCI 3c905C Tornado at d0936c00. pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ns83820.c: National Semiconductor DP83820 10/100/1000 driver. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com> http://www.scyld.com/network/drivers.html uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 1 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 6Y080P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC DV-5700A, ATAPI CD/DVD-ROM drive hdd: CD-RW 52X24, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Loading iSCSI transport class v1.1-646.<7>libata version 2.00 loaded. PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 234 MB/s raid6: int32x2 273 MB/s raid6: int32x4 214 MB/s raid6: int32x8 191 MB/s raid6: mmxx1 636 MB/s raid6: mmxx2 878 MB/s raid6: sse1x1 667 MB/s raid6: sse1x2 875 MB/s raid6: using algorithm sse1x2 (875 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1628.000 MB/sec raid5: using function: pIII_sse (1628.000 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI No-Shortcut mode Suspend2 Core. Suspend2 Userspace UI Support module loaded. Suspend2 Userspace Storage Manager module loaded. Suspend2 Compressor module loaded. Suspend2 Encryptor module loaded. Suspend2 Block I/O module loaded. Suspend2 Swap Allocator module loaded. Time: tsc clocksource has been installed. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 input: AT Translated Set 2 keyboard as /class/input/input0 VFS: Mounted root (ext2 filesystem). Suspend2 2.2.8.4: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image. Suspend2 2.2.8.4: Resume2 parameter is empty. Suspending will be disabled. Suspend2 2.2.8.4: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 13235 to 14240 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 6310 and revoked 0/1 blocks kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal ext3_orphan_cleanup: deleting unreferenced inode 105480 ext3_orphan_cleanup: deleting unreferenced inode 105479 ext3_orphan_cleanup: deleting unreferenced inode 105478 ext3_orphan_cleanup: deleting unreferenced inode 105477 ext3_orphan_cleanup: deleting unreferenced inode 105476 EXT3-fs: hda1: 5 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 268k freed Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 PCI: setting IRQ 3 as level-triggered PCI: Found IRQ 3 for device 0000:00:1f.2 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 3, io base 0x0000ef40 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:1f.4 PCI: Sharing IRQ 9 with 0000:01:0b.0 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ef80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:1f.3 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Linux video capture interface: v2.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.3 (tagged release) loading ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:01:09.0 PCI: Sharing IRQ 11 with 0000:01:0d.0 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) msp3400 1-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP3435G-B6 supports radio, mode is autodetect and autoselect saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) tveeprom 1-0050: Hauppauge model 48011, rev G410, serial# 2649783 tveeprom 1-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is MSP3435 (idx 10) tveeprom 1-0050: has radio ivtv0: Autodetected Hauppauge WinTV PVR-250 ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio tuner 1-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 PCI: Found IRQ 11 for device 0000:01:0a.0 ivtv: ==================== END INIT IVTV ==================== Adding 379504k swap on /dev/hda2. Priority:-1 extents:1 across:379504k EXT3 FS on hda1, internal journal bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bt878: AUDIO driver version 0.0.0 loaded Non-volatile memory driver v1.2 input: i2c IR (Hauppauge) as /class/input/input1 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c driver #0] i2c IR (Hauppauge): unknown key: key=0x7f raw=0x187f down=1 saa7130/34: v4l2 driver version 0.2.14 loaded i2c IR (Hauppauge): unknown key: key=0x7f raw=0x187f down=0 cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded cx2388x dvb driver version 0.0.6 loaded cx8802_register_driver() ->registering driver type=dvb access=shared ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Registering unionfs 20061031-1310 unionfs: debugging is not enabled usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ts: Compaq touchscreen protocol output fuse init (API version 7.7) NET: Registered protocol family 17 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: setting full-duplex. bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 21500 bytes, v3). bootsplash: status on console 5 changed to on eth0: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode

Author:	hd1080 [ Thu Jun 14, 2007 4:59 pm ]
Post subject:
What else would be helpful to you?

Author:	tjc [ Thu Jun 14, 2007 7:10 pm ]
Post subject:
hd1080 wrote: What log files would you like? Some of the ones that are referenced in that link (which I've checked before) have a few thousand lines to them... Thats why that page also tells you what to search for and how to extract the relevant portions, complete with copy & paste ready example commands. If you ssh into the box (possibly using something like "putty" in MS-Windows) you can paste the examples right into a shell session and copy the output right into a posting. OBTW - It helps if you put the output inside of a Code: [code][/code] markup block so it preserves the formatting... So far that looks pretty sane. It's one of the original PVR-250 cards which were really just PVR-350 cards without the TV output hardware. It's even got the MPEG decoder... Have you checked the signal quality of the input and the rest of the stuff on the PictureQualityIssues page?

Author:	hd1080 [ Thu Jun 14, 2007 8:30 pm ]
Post subject:
Hopefully this is what you're looking for. Following http://www.knoppmythwiki.org/index.php?page=CheckingLogFiles, dmesg \| grep "tuner model is TCL M2523_._E" returns nothing, and more /var/log/Xorg.0.log doesn't show any warnings or errors. I apologize for not being too familiar with this. Please let me know if there are any other important commands I've missed that you need from me. Code:* May 30 09:15:30 mythtv kernel: ivtv: ==================== START INIT IVTV ==================== May 30 09:15:30 mythtv kernel: ivtv: version 0.10.1 (tagged release) loading May 30 09:15:30 mythtv kernel: ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1 May 30 09:15:30 mythtv kernel: ivtv: In case of problems please include the debug info between May 30 09:15:30 mythtv kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with May 30 09:15:30 mythtv kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. May 30 09:15:30 mythtv kernel: ivtv0: Autodetected Hauppauge card (cx23415 based) May 30 09:15:30 mythtv kernel: PCI: Found IRQ 11 for device 0000:01:09.0 May 30 09:15:30 mythtv kernel: PCI: Sharing IRQ 11 with 0000:01:0d.0 May 30 09:15:30 mythtv kernel: usbcore: registered new driver usbfs May 30 09:15:30 mythtv kernel: usbcore: registered new driver hub May 30 09:15:30 mythtv kernel: USB Universal Host Controller Interface driver v3.0 May 30 09:15:30 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) May 30 09:15:30 mythtv kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled May 30 09:15:30 mythtv kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 30 09:15:30 mythtv kernel: parport: PnPBIOS parport detected. May 30 09:15:30 mythtv kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] May 30 09:15:30 mythtv kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) May 30 09:15:30 mythtv kernel: 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 30 09:15:30 mythtv kernel: Linux agpgart interface v0.101 (c) Dave Jones May 30 09:15:30 mythtv kernel: ivtv0: Encoder revision: 0x02060039 May 30 09:15:30 mythtv kernel: ivtv0: Decoder revision: 0x02020023 May 30 09:15:30 mythtv kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) May 30 09:15:30 mythtv kernel: msp3400 0-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) May 30 09:15:30 mythtv kernel: msp3400 0-0040: MSP3435G-B6 supports radio, mode is autodetect and autoselect May 30 09:15:30 mythtv kernel: saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) May 30 09:15:30 mythtv kernel: tveeprom 0-0050: Hauppauge model 48011, rev G410, serial# 2649783 May 30 09:15:30 mythtv kernel: tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) May 30 09:15:30 mythtv kernel: tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) May 30 09:15:30 mythtv kernel: tveeprom 0-0050: audio processor is MSP3435 (idx 10) May 30 09:15:30 mythtv kernel: tveeprom 0-0050: has radio May 30 09:15:30 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV PVR-250 May 30 09:15:30 mythtv kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB) May 30 09:15:30 mythtv kernel: ivtv0: Registered device video32 for encoder YUV (2 MB) May 30 09:15:30 mythtv kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB) May 30 09:15:30 mythtv kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB) May 30 09:15:30 mythtv kernel: ivtv0: Registered device radio0 for encoder radio May 30 09:15:30 mythtv kernel: tuner 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) May 30 09:15:30 mythtv kernel: ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 May 30 09:15:30 mythtv kernel: PCI: Found IRQ 11 for device 0000:01:0a.0 May 30 09:15:30 mythtv kernel: ivtv: ==================== END INIT IVTV ==================== [url][/url][url][/url]

Author:	hd1080 [ Mon Jun 18, 2007 2:25 pm ]
Post subject:
Anybody have the remotest idea?

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/