LinHES Forums :: View topic - Can't use second Bt878 card

bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 01:07.0, irq: 7, latency: 32, mmio: 0xd8000000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00bff706 [init]
i2c-core.o: adapter bt878 #0 [sw] registered as adapter 0.
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw]
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt878 #0 [sw]](pos. 0).
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (1).
bttv1: Bt878 (rev 17) at 01:09.0, irq: 3, latency: 32, mmio: 0xd8002000
bttv1: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
tuner: chip found at addr 0xc2 i2c-bus bt878 #1 [sw]
i2c-core.o: client [(tuner unset)] registered to adapter [bt878 #1 [sw]](pos. 0).
i2c-core.o: adapter bt878 #1 [sw] registered as adapter 1.
bttv: readee error
bttv1: using tuner=-1
bttv1: i2c: checking for MSP34xx @ 0x80... not found
bttv1: i2c: checking for TDA9875 @ 0xb0... not found
bttv1: i2c: checking for TDA7432 @ 0x8a... not found
bttv1: registered device video1
bttv1: registered device vbi1

root@mythtv:/etc/mythtv/modules # cat bttv0
alias char-major-81-0 bttv
options bttv card=23
post-install bttv insmod tuner type=5
root@mythtv:/etc/mythtv/modules # cat bttv1
alias char-major-81-1 bttv
options bttv card=34
post-install bttv insmod tuner type=5
root@mythtv:/etc/mythtv/modules #

root@mythtv:/etc/mythtv/modules # cat bttv0
alias char-major-81-0 bttv
options bttv card=34,72 radio=1,1 tuner=5,5 # pll=1
root@mythtv:/etc/mythtv/modules # cat bttv1
alias char-major-81-1 bttv
options bttv card=34,72 radio=1,1 tuner=5,5 # pll=1

Author:	Gibbon_99 [ Wed Jun 09, 2004 7:57 pm ]
Post subject:	Can't use second Bt878 card - Solved !!!
Hi I've got myth running with one Bt878 card just fine - now I want to add a second one. Upon bootup, I get this error: Code: bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 01:07.0, irq: 7, latency: 32, mmio: 0xd8000000 bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606 bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00bff706 [init] i2c-core.o: adapter bt878 #0 [sw] registered as adapter 0. bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw] i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt878 #0 [sw]](pos. 0). bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (1). bttv1: Bt878 (rev 17) at 01:09.0, irq: 3, latency: 32, mmio: 0xd8002000 bttv1: using: * UNKNOWN/GENERIC * [card=0,autodetected] bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] tuner: chip found at addr 0xc2 i2c-bus bt878 #1 [sw] i2c-core.o: client [(tuner unset)] registered to adapter [bt878 #1 [sw]](pos. 0). i2c-core.o: adapter bt878 #1 [sw] registered as adapter 1. bttv: readee error bttv1: using tuner=-1 bttv1: i2c: checking for MSP34xx @ 0x80... not found bttv1: i2c: checking for TDA9875 @ 0xb0... not found bttv1: i2c: checking for TDA7432 @ 0x8a... not found bttv1: registered device video1 bttv1: registered device vbi1 The second card is a PixelView PlayTV card (card = 23 type=5) I have tried adding this to /etc/mythtv/modules/bttv1 - but with no success. How do I get the second card to work? Thanks

Author:	Xsecrets [ Wed Jun 09, 2004 8:05 pm ]
Post subject:
did you run update-modules after you added the options to the bttv1 file?

Author:	Gibbon_99 [ Wed Jun 09, 2004 8:14 pm ]
Post subject:
Yes - and I just did it again to be sure. The card worked ok in another FC2 box.... I'm stumped.

Author:	Gibbon_99 [ Wed Jun 09, 2004 8:16 pm ]
Post subject:
This is what I have set: Code: root@mythtv:/etc/mythtv/modules # cat bttv0 alias char-major-81-0 bttv options bttv card=23 post-install bttv insmod tuner type=5 root@mythtv:/etc/mythtv/modules # cat bttv1 alias char-major-81-1 bttv options bttv card=34 post-install bttv insmod tuner type=5 root@mythtv:/etc/mythtv/modules # Will this work ?

Author:	Gibbon_99 [ Wed Jun 09, 2004 10:57 pm ]
Post subject:	Can't used second Bt878 card - Solved !!
It works now - both cards are recognised, and I can do Picture-in-picture (Mythbackend keeps crashing when I do, but thats a different issue) I changed the modules as below by adding the options line: 34 - is the Winfast card 72 - is the PixelView card. Code: root@mythtv:/etc/mythtv/modules # cat bttv0 alias char-major-81-0 bttv options bttv card=34,72 radio=1,1 tuner=5,5 # pll=1 root@mythtv:/etc/mythtv/modules # cat bttv1 alias char-major-81-1 bttv options bttv card=34,72 radio=1,1 tuner=5,5 # pll=1 Code: bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 01:07.0, irq: 7, latency: 32, mmio: 0xd8000000 bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606 bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00bff706 [init] bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (1). bttv1: Bt878 (rev 17) at 01:09.0, irq: 3, latency: 32, mmio: 0xd8002000 bttv1: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option] bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv1: using tuner=5 bttv1: i2c: checking for TDA7432 @ 0x8a... not found bttv1: registered device video1 bttv1: registered device vbi1 bttv1: registered device radio1 bttv1: PLL: 28636363 => 35468950 .. ok

LinHES Forums http://forum.linhes.org/

Can't use second Bt878 card - Solved !!! http://forum.linhes.org/viewtopic.php?f=2&t=1688	Page 1 of 1

Author:	mgordon [ Thu Jun 10, 2004 6:09 am ]
Post subject:
What sort of PIP backend crash are you experiencing. Is it similiar to the behavior seen in this post, http://mysettopbox.tv/phpBB2/viewtopic. ... highlight= I have been trying to get PIP working for about a week with no success. Please post configuration information, knoppmyth veersion, ivtv version, vl4 or vl42 and bttv version. Thanks, Mike G.

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/