View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 8 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Fri Apr 17, 2009 3:44 pm 
Offline
Joined: Sun Feb 11, 2007 4:00 pm
Posts: 24
Has anyone found a IR receiver that is built into a front 3.5" front panel that works easily with lirc? I'm hoping to not have to deal with a external IR receiver and extension cable.

The cheapest solution I could find is http://www.newegg.com/Product/Product.a ... 6811999191 but I haven't been able to confirm if it works with lirc. I don't need a remote.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 17, 2009 6:22 pm 
Offline
Joined: Sun Sep 25, 2005 3:50 pm
Posts: 1013
Location: Los Angeles
http://www.mythtv.org/wiki/Antec_Fusion_lirc

_________________
Mike
My Hardware Profile


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 17, 2009 9:29 pm 
Offline
Joined: Mon Dec 24, 2007 9:47 am
Posts: 535
Location: Ottawa, Canada
I use an Antec Veris Basic (about US$30). It will read all of the codes for the above but is much cheaper. It fits in a 3.5" bay.
http://www.antec.com/Believe_it/product.php?id=NzA5

The bonus is the power button runs in series with this IR receiver so the PC can be completely off and when you press the power button on the remote, it powers the PC on. Very nice!

The basic comes with an RM100 remote which is fairly basic but I then use a Harmony remote to drive all of the other codes and the RM100 sits in a drawer.

My How-to link for R5.5:
http://mysettopbox.tv/phpBB2/viewtopic.php?t=19744


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 20, 2009 11:05 pm 
Offline
Joined: Sun Feb 11, 2007 4:00 pm
Posts: 24
Thanks, picked up the Veris Basic onsale at Fry's for $23.


christ wrote:
I use an Antec Veris Basic (about US$30). It will read all of the codes for the above but is much cheaper. It fits in a 3.5" bay.
http://www.antec.com/Believe_it/product.php?id=NzA5

The bonus is the power button runs in series with this IR receiver so the PC can be completely off and when you press the power button on the remote, it powers the PC on. Very nice!

The basic comes with an RM100 remote which is fairly basic but I then use a Harmony remote to drive all of the other codes and the RM100 sits in a drawer.

My How-to link for R5.5:
http://mysettopbox.tv/phpBB2/viewtopic.php?t=19744


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 20, 2009 11:22 pm 
Offline
Joined: Tue Jan 18, 2005 2:07 am
Posts: 1532
Location: California
Tweak wrote:
Thanks, picked up the Veris Basic onsale at Fry's for $23.


What section of the store did you find it in? I think I'll swing by and pick one up.

_________________
Marc

The views expressed are my own and do not necessarily reflect the views of my employer.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 24, 2009 1:57 am 
Offline
Joined: Sun Feb 11, 2007 4:00 pm
Posts: 24
Sorry for the late reply. :(
For the store I went to, Manhattan Beach, they were in the aisle with the hard drive enclosures, case fans, and power supplies.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 8:24 pm 
Offline
Joined: Tue Jan 18, 2005 2:07 am
Posts: 1532
Location: California
I've picked up an Antic Veris Basic at Fry's in the bay area and I'm getting ready to install, but I do have a few questions:

1. I've already customized my Harmony remote to use the Hauppauge remote codes. Can I continue to use those codes with this receiver, or do I have to configure my Harmony to use the "SoundGraphRM200" remote, as Christ did, to get a broader set of available buttons?

2. I'm planning to phase the install across 2 days due to time constraints. If I do the LIRC software upgrade first, will my Hauppuage PVR-150's receiver continue to work with the new version of LIRC if only update hardware.conf & /etc/init.d/lirc?

Thanks.

_________________
Marc

The views expressed are my own and do not necessarily reflect the views of my employer.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 10:00 pm 
Offline
Joined: Mon Dec 24, 2007 9:47 am
Posts: 535
Location: Ottawa, Canada
marc.aronson wrote:
1. I've already customized my Harmony remote to use the Hauppauge remote codes. Can I continue to use those codes with this receiver, or do I have to configure my Harmony to use the "SoundGraphRM200" remote, as Christ did, to get a broader set of available buttons?

By the Hauppauge I think you mean the MCE RC6 remote. While this remote will work with the Antec Fusion LCD, it will not work with the Veris Basic. I know, I was surprised too when I tried that path. You will need to go to the RM200 codes to make this work.

Quote:
2. I'm planning to phase the install across 2 days due to time constraints. If I do the LIRC software upgrade first, will my Hauppuage PVR-150's receiver continue to work with the new version of LIRC if only update hardware.conf & /etc/init.d/lirc?

This should be ok. It is really just updating the known devices and adding drivers for them.

Also, while I stayed as close as possible to the original iMon lircrc in KM, I did a couple of small mods to allow for power off when I was done using the system. Let me know and I can share that too.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu