| LinHES Forums http://forum.linhes.org/ |
|
| 350 and new 250 IVTV configuration - No connection to backen http://forum.linhes.org/viewtopic.php?f=2&t=2826 |
Page 1 of 1 |
| Author: | tvmyth [ Sat Oct 30, 2004 5:48 pm ] |
| Post subject: | 350 and new 250 IVTV configuration - No connection to backen |
I have a PVR-350 and a new PVR-250 installed and IVTV recompiled on version ivtv-0.1.10-pre2-ck113a in order to get the new card detected. Both cards will capture tv and play back in mplayer by performing cat /dev/video0 >0.mpg and cat /dev/video1 >1.mpg When I open mythtv and try to view tv or record, I receive the message "the backend server has gone away" or "could not connect to backend server". This is a backend/frontend standalone system. Since I have a pvr 350 I followed these directions using both fb1 and fb0 rm -f /dev/fb0autodetect rm -f /dev/fb1 mknod /dev/fb1 c 29 1 chmod 666 /dev/fb1 chown mythtv /dev/fb1 I have searched all postings about the newer 250 cards, but none have addressed having a 350 and new 250 card, only dual 250's. I have tried differnt options for the ivtv file and it currently stands at alias char-major-81 videodev #alias char-major-81-0 ivtv #alias char-major-81-1 ivtv alias char-major-61 lirc_i2c options ivtv debug=1 options card=85,23 tuner=50,2 #options saa7127 enable_output=0 output_select=0 options msp3400 once=1 simple=1 add below ivtv msp3400 saa7115 tuner add above ivtv lirc_dev lirc_i2c #post install ivtv /usr/local/bin/ivtvctl -d /dev/video0 -u 0x3000 #post install ivtv /usr/local/bin/ivtvctl -d /dev/video16 -u 0x3000 #post install ivtv /usr/local/bin/ivtvctl -d /dev/video32 -u 0x3000 #post install ivtv /usr/local/bin/ivtvctl -d /dev/video224 -u 0x3000 I have also have tried entering saa7127 in the two appropriate lines displayed in the Hauppaugethreefifty installation directions to no avail. dmesg |tvee shows i2c-core.o: driver tveeprom registered. tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7368266 tveeprom: tuner = TCL 2002N (idx = 85, type = 50) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3445 (type = 12) ivtv: i2c attach [client=tveeprom[0],ok] i2c-core.o: client [tveeprom[0]] registered to adapter [ivtv i2c driver #0](pos. 3). tveeprom: Hauppauge: model = 48132, rev = J323, serial# = 2760067 tveeprom: tuner = Philips FM1236 (idx = 23, type = 2) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[1],ok] i2c-core.o: client [tveeprom[1]] registered to adapter [ivtv i2c driver #1](pos. 3). I believe I may not have the ivtv file correct. Does anyone have a valid 350 and new 250 card ivtv configuration or have any idea why I am seeing the backend server error messages, when the two cards are clearly working seperate from Mythtv? Thanks |
|
| Author: | cesman [ Sat Oct 30, 2004 9:38 pm ] |
| Post subject: | |
And the backend log says what? |
|
| Author: | tvmyth [ Mon Nov 01, 2004 7:18 am ] |
| Post subject: | |
I changed the IVTV settings once, and now the 250 won't get anything but snow, no matter what I change to try to get it back. I reinstalled and still nothing, so I think I'll give it a rest for a while. Thanks for your help anyway. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|