Hello. I have a PVR250 and a PVR350. The 250 works great, and the 350 shows static. When I use type=2, the 250 works fine, but if I try any type = 10,38,39 or 47, the 250 will not change channels anymore, and the 350 still will not work. Here is some of my info.

I have also upgraded ivtv to ivtv-0.2.0-rc3a.

Nov 30 12:45:45 mythtv kernel: tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 7391248
Nov 30 12:45:45 mythtv kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
Nov 30 12:45:45 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Nov 30 12:45:45 mythtv kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Nov 30 12:45:45 mythtv kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Nov 30 12:45:45 mythtv kernel: ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad1598, Revision 0x00000001
Nov 30 12:45:45 mythtv kernel: ivtv: NTSC tuner detected
Nov 30 12:45:45 mythtv kernel: ivtv: Radio detected
Nov 30 12:45:45 mythtv kernel: ivtv: Encoder revision: 0x02040011
Nov 30 12:45:45 mythtv kernel: ivtv: Decoder revision: 0x02020023
Nov 30 12:45:45 mythtv kernel: ivtv: Setting Tuner 47
Nov 30 12:45:45 mythtv kernel: tveeprom: Hauppauge: model = 32032, rev = B310, serial# = 7045900
Nov 30 12:45:45 mythtv kernel: tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
Nov 30 12:45:45 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Nov 30 12:45:45 mythtv kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Nov 30 12:45:45 mythtv kernel: ivtv: i2c attach [client=tveeprom[1],ok]
Nov 30 12:45:45 mythtv kernel: ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00893450, Revision 0x00000000
Nov 30 12:45:45 mythtv kernel: ivtv: NTSC tuner detected
Nov 30 12:45:45 mythtv kernel: ivtv: Radio detected
Nov 30 12:45:45 mythtv kernel: ivtv: Encoder revision: 0x02040011


/etc/mythtv/modules/ivtv

alias char-major-61 lirc_i2c
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
options tuner type=2
options saa7127 enable_output=1 output_select=1
options msp3400 once=1 simple=1
add below ivtv msp3400 saa7115 saa7127 tuner
add above ivtv lirc_dev lirc_i2c ivtv-fb


Thanks
Joe Doran

have you tried type = 2, 47

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

Yes. I have tryed

2,47
47,2
10,2
2,10
etc....

Still static on the 250, and if I do something different from type=2, the 250 will not change channels.

Thanks
Joe Doran

just for grins have you tried -1 ?

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

Actualy Yes. Since -1 does autodetect. This is why I am so confused. I do know the tuner is an LG tuner.

Thanks
Joe Doran

I think you're having the same problem as posted here with a newer tuner
http://mysettopbox.tv/phpBB2/viewtopic. ... ght=#16026
They say you have to patch and recompile the tuner.c
I was looking to do this myself, but could not find a tuner.c file on my system. I did not try the follow-up instructions yet due to curretn time restraints. Good luck