| LinHES Forums http://forum.linhes.org/ |
|
| dual bttv problem http://forum.linhes.org/viewtopic.php?f=2&t=3153 |
Page 1 of 1 |
| Author: | ViralHex [ Sat Jan 01, 2005 2:13 pm ] |
| Post subject: | dual bttv problem |
hey, so I've got a master backend (I've got a slave backend too, but I don't think it's part of my problem) so on this master backend I've got two ATI TV Wonder VE capture cards, so they're both bttv... well, the video is decent, but not that great... I'm wondering if it could be better, and this might be affecting it... so does anyone know what this means: Code: bttv0: timeout: drop=20 irq=101621/101621, risc=0fd4207c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). and it repeats this with bttv1 and and again with bttv0 and so on, so on. and just as a side note, this is by /etc/mythtv/modules/bttv: Code: alias char-major-81 videodev options bttv card=64,64 radio=0,0 tuner=2,2 this is /etc/mythtv/modules/bttv0 Code: alias char-major-81-0 bttv options bttv card=64 radio=0 tuner=2 and lastly my /etc/mythtv/modules/bttv1 Code: alias char-major-81-1 bttv options bttv card=64 radio=0 tuner=2 oh yeah, and this is dmesg | grep bttv: Code: root@mythtv:~ # dmesg | grep bttv
bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:0b.0, irq: 3, latency: 32, mmio: 0xef000000 bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003 bttv0: using: ATI TV-Wonder VE [card=64,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=2 bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .<6>hub.c: new USB device 00:10.1-2, assigned address 2 bttv: Bt8xx card found (1). bttv1: Bt878 (rev 17) at 00:0d.0, irq: 11, latency: 32, mmio: 0xee000000 bttv1: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003 bttv1: using: ATI TV-Wonder VE [card=64,autodetected] bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv1: using tuner=19 bttv1: i2c: checking for TDA9875 @ 0xb0... not found bttv1: i2c: checking for TDA7432 @ 0x8a... not found bttv1: registered device video1 bttv1: registered device vbi1 bttv1: PLL: 28636363 => 35468950 .. ok bttv0: PLL can sleep, using XTAL (28636363). bttv1: PLL can sleep, using XTAL (28636363). bttv0: timeout: drop=20 irq=101621/101621, risc=0fd4207c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). bttv1: timeout: drop=14 irq=1464/116751, risc=111f6084, bits: HSYNC OFLOW FDSR bttv1: reset, reinitialize bttv1: PLL can sleep, using XTAL (28636363). bttv1: timeout: drop=14 irq=1465/116786, risc=1cee101c, bits: VSYNC HSYNC OFLOW bttv0: timeout: drop=36 irq=137779/137779, risc=0724207c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). bttv0: timeout: drop=36 irq=137786/137786, risc=1cf4401c, bits: VSYNC HSYNC OFLOW bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). bttv0: timeout: drop=52 irq=369883/369883, risc=092f307c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). bttv0: timeout: drop=52 irq=369886/369886, risc=1cf4401c, bits: VSYNC HSYNC OFLOW bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). bttv0: timeout: drop=66 irq=370374/370374, risc=1ee4907c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). bttv0: timeout: drop=66 irq=370377/370377, risc=1cf4401c, bits: VSYNC HSYNC OFLOW bttv0: reset, reinitialize bttv0: PLL can sleep, using XTAL (28636363). |
|
| Author: | cesman [ Sun Jan 02, 2005 4:33 am ] |
| Post subject: | |
Specify your options in 1 file only (bttv). |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|