| LinHES Forums http://forum.linhes.org/ |
|
| X Windows graphics inverted on EPIA TV Out http://forum.linhes.org/viewtopic.php?f=2&t=3800 |
Page 1 of 1 |
| Author: | brill [ Sat Mar 05, 2005 12:11 pm ] |
| Post subject: | X Windows graphics inverted on EPIA TV Out |
== In case you've already read this, I posted this to the install forum since it appears to be an install issue, but it got deleted == I need some help resolving X windows issues. I'm running up against a wall with this one and could really use some pointers. EPIA MII with WinTV PVR 250, and thats about it, pretty basic. I just installed the latest 5R12 and it mostly went without a hitch... except for the TV out on my EPIA MII. 1) At first I couldn't get anything on the TV screen, until I discovered a BIOS option to output to the Screen... You might want to add that to a FAQ for EPIA boards. 2) Now that I have TV Out from th EPIA MII, xwindows seems to be inverting the colours (they are certainly messed up). I can see when X starts up that it is correct, but it immediatly switches to another graphics mode where everything is inverted. At first I thought it was just the MythTV app, but I noticed that when I exit MythTV, x itself is inverted. Some points that might shed some light: - During install I selected the XvMC option, I couldn't find anything explicit about EPIA boards and XvMC, but from what I read, it looked like I could use it. - When I first set the box up, all I got was static on LiveTV but x was displaying properly, I then I tried the Caveats note and executed dpkg -i /usr/srcv/mythtv/epia/*.deb. which gave me a picture, but inverted. - I check the /etc/mythtv/modules/ivtv and the type was set to 2 which I changed to 39 following the points that another thread mentioned with no luck. What I've noticed that may also be clues: - /etc/mythtv/modules/ivtv sets the type to 39 (originally 2) but the tveeprom line in dmesg lists the type as 50? /etc/mythtv/modules/ivtv: alias char-major-81 videodev alias char-major-61 lirc_i2c options ivtv debug=1 options tuner type=39 options msp3400 once=1 simple=1 install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115; /sbin/modprobe --ignore-install ivtv remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprob e -r tuner ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3a) loading ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3123 vendor: 0x1106 lirc_i2c: chip found @ 0x18 (Hauppauge IR) ivtv: i2c attach [client=Hauppauge IR,ok] lirc_dev: lirc_register_plugin:sample_rate: 10 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 39 (LG NTSC (newer TAPC series)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. msp34xx: ivtv version msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Feb 5 2005 20:42:28 ivtv: i2c attach [client=MSP3445G-B8,ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7477141 tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3445 (type = 12) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x00891615, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected eth1: no IPv6 routers present ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Setting Tuner 50 tuner: type already set to 39, ignoring request for 50 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 2231, itv = 0xded62920 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== |
|
| Author: | cecil [ Sat Mar 05, 2005 12:30 pm ] |
| Post subject: | |
KnoppMyth -> Installation is for issues related to installing KnoppMyth. Comment DPMS (dpms) from XF86Config-4 and restart GDM. |
|
| Author: | brill [ Fri Mar 18, 2005 7:52 am ] |
| Post subject: | |
cecil wrote: KnoppMyth -> Installation is for issues related to installing KnoppMyth. Comment DPMS (dpms) from XF86Config-4 and restart GDM.
That worked first time, thanks. |
|
| Author: | cesman [ Fri Mar 18, 2005 11:24 am ] |
| Post subject: | |
You're welcome. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|