Okay, my fx5200 is in the mail. I am currently using a PVR-350 for component video out. What do I need to do in order to use the 5200 for tvout? (I currently have an ATI card in the agp slot)

actually you are probably using the pvr350 for composite out not component as the 350 does not have component outputs.

As for getting the output from the nvidia card just run the nvidia installer and swap the sample config file over then make sure to change the svideo option to composite, if that's what you have to use, This may not be perfect, but is a good starting point.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

hehe, yeah composite out.
Where can I find this nVidia Installer? (quick forum search came up empty)
Why is this not "perfect"? If I re-installed Knoppmyth would I need to do the nVidia Installer?

Is anything in life perfect? Xsecrets gave you the quickest, simplest, easiest answer. How about reading the pamphlet?

_________________
cesman

When the source is open, the possibilities are endless!

Pamphlet? This is the first I have heard of a pamphlet...

http://www.mysettopbox.tv/doc.html
http://www.knoppmythwiki.org/index.php?page=KnoppMythInstall
...