Hi Guys,

Still no luck with R5A12 and my Twinhan Visionplus DVB-T card. Here is dmesg output , looks ok. Mythtv-setup cannot find card , i am lost, now I have spent week on this. ppl have reported this card works out of the box on 2.6.xx kernels but I am not finding that here.




bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 18 (level, high) -> IRQ 18
bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 18, latency: 32, mmio: 0xdc000000
bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f100fe [init]
bttv0: using tuner=4
tuner: Ignoring new-style parameters in presence of obsolete ones
bttv0: add subdevice "dvb0"

I have found if i type the following AND stop the backend mythtv-setup sees the card as a dvb-t. I am getting a little warmer i hope

modprobe bttv i2c_hw=1 card=0x71
modprobe dvb-bt8xx
modprobe dst

If I reboot it shows the following in /var/log/mythtv/mythbackend.log

2005-03-29 00:37:19.380 Changing from None to WatchingLiveTV
2005-03-29 00:37:19.390 DVB#0 ERROR - Opening DVB frontend device failed.
(19) No such device
2005-03-29 00:37:19.393 Tuning Error -- aborting recording
2005-03-29 00:37:19.395 TVRec: Recording Prematurely Stopped
2005-03-29 00:37:20.737 MainServer::HandleAnnounce Playback
2005-03-29 00:37:20.739 adding: mythtvv as a client (events: 0)


Any ideas anyone ? Please ? I am begging now

And I dont know if this is related but if I go into Program Finder it is populated HOWEVER if i go into Program Guide there is nothing there.

Forget about the modprobe bttv, the dst or dvb-bt8xx should load it automatically (I can't remember which one does it).

_________________
| Nigel Pearson, nigel.pearson.au@gmail.com
| "Things you own end up owning you" - Tyler, Fight Club