LinHES Forums
http://forum.linhes.org/

R5A12 to 15.1 - PVR350 tv-out, freeze at the boot
http://forum.linhes.org/viewtopic.php?f=2&t=4530		 Page 1 of 1
Author:  aspain [ Wed May 11, 2005 10:30 am ]
Post subject:  R5A12 to 15.1 - PVR350 tv-out, freeze at the boot
ref : pvr.pl (http://dc1.snapperworld.net/files/mythtv/pvr.pl)

*****************
* pvr.pl with R5A15 *
*****************

Yesterday, I installed R5A15 on my computer. I discovered that the script (pvr.pl) was distributed in this version. Here is what I have done :

root@pvr:~#cd /root
root@pvr:~#perl /usr/local/bin/pvr.pl -i

KnoppMythVersion detected=R5 Alpha 15
Backup directory /root/pvr350util exists...kipping file backup
insmod : can't read 'ivtv-fb' : no such file or directory
sorry, i could not find the /etcX11/XF86Config-4.pvr350-tvout.sample file that need to construct the XF86Config-4.file
Exiting

Anyone know what i'm doing wrong ?
I just installed R5A15 and CTRL-ALT-F1 to exit at the command line
log with root and execute script.

*****************
* pvr.pl with R5A12 *
*****************

Today, I decided to install R5A12 and execute pvr.pl in the root. The script ran with no error but when I reboot, my computer freeze in the boot with cascading text and my TV displays green/grey bars.
-->capture : http://www.imagebarrel.com/img/05/97/05/screen.JPG

My pvr-350 is connected in input with a cable (coaxial)
and in output with S-VIDEO cable.

:?: Anyone know what should I do to resolve this problem ?
Author:  aspain [ Fri May 27, 2005 6:41 am ]
Post subject: 
:idea: Ok...I found a solution with R5A12. That was my video card on my mother board. I added a new video card and the problem is resolved!

But... Mythbrowser can't open a web page. Here is the message :

"an error occured while loading http://www.google.com
Could not start process cannot talk to klauncher"


and...I can't use Mythgame...problem with the version of xmame
Author:  aspain [ Fri May 27, 2005 10:37 pm ]
Post subject: 
**************
*With R5A15.1
**************

If I manually setup my tv-out, my TV went from black to a bunch of gray and blackish bars in a stepped-diagonal pattern and my machine just freeze during the boot.

Here is what I have done :

Code:
root@mythtv:~# /sbin/modprobe ivtv-fb
root@mythtv:~# dmesg | grep "iTVC15 TV out"
ivtv-osd: fb0: iTVC15 TV out frame buffer device


Code:
root@mythtv:~# lspci
0000:02:01.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)


Code:
root@mythtv:/#nano /etc/X11/XF86Config-4

Section "Device"
        Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
        Driver      "ivtvdev"

        ### change fb1 to whatever number you got in the previous section
        Option      "fbdev" "/dev/fb0"
        Option      "ivtv" "/dev/fb0"

        ### change the busid to whatever is reported by lspci. Note that
        ### output of lspci is hex, so add a preceding "0x" to the BusID
        #BusID "PCI:02:01:0"
        BusID "0:0x2:1"
EndSection


Code:
root@mythtv:/# nano /etc/mythtv/modules/ivtv

alias char-major-81 videodev
alias char-major-61 lirc_i2c
#options ivtv debug=1
#options tuner type=2
options msp3400 once=1 simple=1
install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115;  /sbin/modprobe --ignore-install  ivtv; /sbin/modprobe ivtv-fb; /sbin/modprobe lirc_i2c
remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner && /sbin/modprobe -r ivtv-fb && /sbin/modprobe -r lirc_i2c



Code:
root@mythtv:/#install -c -m 0444 /tmp/ivtv-0.2.0-rc3j/utils/ivtvdev_drv_o /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o


Code:
root@mythtv:~# dmesg


ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x1130 vendor: 0x8086
ivtv: i2c attach [client=tveeprom,ok]
ivtv: i2c attach [client=(tuner unset),ok]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Apr 20 2005 06:45:08
ivtv: i2c attach [client=MSP3448W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x01, (1F) 0x40
tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 7520098
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad1598, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 47
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 2599, itv = 0xd0c21a20
ivtv: ivtv_dec_thread: pid = 2600, itv = 0xd0c21a20
eth0: no IPv6 routers present
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================  END INIT IVTV  ====================
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xd5510000, mapped to 0xd1a90000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
Console: switching to colour frame buffer device 90x30
ivtv-osd: fb0: iTVC15 TV out frame buffer device
cx2388x v4l2 driver version 0.0.4 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach [client=Hauppauge IR,ok]
lirc_dev: lirc_register_plugin:sample_rate: 10
saa7115: decoder disable output
saa7115: decoder set input (0)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 1, output 1
saa7115: decoder enable output
saa7115: decoder set size
saa7115: decoder disable output
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
saa7115: decoder enable output
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder disable output
saa7115: decoder enable output
input: PC Speaker
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ichxrom: ichxrom_init_one(): Unable to register resource 0xffb00000-0xffffffff - kernel bug?
CFI: Found no ichxrom @fff00000 device at location zero
JEDEC: Found no ichxrom @fff00000 device at location zero
CFI: Found no ichxrom @fff00000 device at location zero
JEDEC: Found no ichxrom @fff00000 device at location zero¸
...
CFI: Found no ichxrom @ffff0000 device at location zero
JEDEC: Found no ichxrom @ffff0000 device at location zero
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI interrupt 0000:03:09.2[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:03:09.2: NEC Corporation USB 2.0
ehci_hcd 0000:03:09.2: irq 11, pci mem 0xdc003000
ehci_hcd 0000:03:09.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:03:09.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
Author:  finger51 [ Mon May 30, 2005 11:27 am ]
Post subject: 
Hey aspain~

It looks like you are a couple of days ahead of me. I'm having the same problems.

Have you made any progress?

for me X won't load after I perl snapperdragon's script, and I get that same banding on my TV. I'm getting:


Code:
root@stevietv:~# perl pvr.pl -d
KnoppMythVersion detected=R5 Alpha 15.1
DEBUG: KnoppMyth Version = R5 Alpha 15.1
DEBUG: Tuner Typer=
DEBUG: Busid=PCI:0x0::0
[b]insmod: can't read 'ivtv-fb': No such file or directory[/b]
DEBUG: fb=agpgart
DEBUG: creating /tmp/ivtv file.
DEBUG: Displaying ivtv file that would have been created
DEBUG: writing temp XF86Config-4 file to /tmp directory.
DEBUG: Displaying XF86Config file that would have been producted


Code:
root@stevietv:~# lspci
0000:01:06.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Author:  aspain [ Mon May 30, 2005 7:19 pm ]
Post subject: 
No solution with R5A15 or R5A15.1

If I execute pvr.pl on R5A12 I can get tv-out. But MythBrowser can't load web page. I dont know why...

Have you try to execute the script on R5A12 ?
Author:  aspain [ Wed Jun 08, 2005 2:36 am ]
Post subject: 
Ok, I found a solution with 15.1
I have to use : BusID "PCI:02:01:00"
and Option "ivtv" "/dev/fb0"

But now, I have no sound!


here is my XF86Config-4 :

Code:
root@mythtv:/#nano /etc/X11/XF86Config-4

Section "Device"
        Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
        Driver      "ivtvdev"

        ### change fb1 to whatever number you got in the previous section
        #Option      "fbdev" "/dev/fb0"
        Option      "ivtv" "/dev/fb0"

        ### change the busid to whatever is reported by lspci. Note that
        ### output of lspci is hex, so add a preceding "0x" to the BusID
        #BusID "PCI:02:01:0"
        #BusID "0:0x2:1"
        BusID "PCI:02:01:00"
EndSection
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/