LinHES Forums • View topic - PVR250 IVTV Svideo and color

Board index KnoppMyth Hardware

All times are UTC - 6 hours

PVR250 IVTV Svideo and color

Page 1 of 1

[ 6 posts ]

Print view

Previous topic Next topic

Author

Message

Kalaine

Post subject: PVR250 IVTV Svideo and color

Posted: Sat Sep 03, 2005 4:25 pm

Joined: Sat Sep 03, 2005 4:07 pm

Posts: 4

{edit: I changed the title of the thread}
Hello all,

I am experiencing yet another Svideo issue. Before I begin, let me tell you what hardware I have.

Abit NF7S - Digital out to come
AMD Sempron 2200+
512megs corsair ddr
Chaintech FX5200 with vga and svideo out(Using Svideo not vga)
PVR250 Svideo in from Directv D100 and btaudio working

Using R5A16

I searched for this and found some things close to my isssue, but not exactly what I was experiencing. I am sure I will be flamed, but I am ok with that since I am pretty confident that I have exhausted my searchs here, google and on Gossamer threads.

Now to the problem

I have tv-out working from the FX5200 and all is well. Xserver and the Mythtv Gui work fabulously!!!(Color working) My overscan is correct and gui lined up properly.

Now, I can select input "4" from ivtvctl -p 4 and get composite to display, but am unhappy with its output. I can also get svideo to display with "0" on ivtvclt -p 0. I just cannot colorize the Black and White of that connection. I have checked the svideo cable for broken/bent pins, swapped cables, and still I get the same BW picture. I just cannot figure out what I am doing wrong.

Tuner says 26552 REV C268
Encoder chip says CX23416-12

/etc/mythtv/modules/ivtc output as follows:

Code:

alias char-major-81 videodev
alias char-major-61 lirc_i2c
#options ivtv debug=1
#options tuner type=2
options msp3400 once=1 simple=1
install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115;  /sbin/modprobe --ignore-install  ivtv
remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner

Maybe I am ignorant to the search parameters/syntax required to turn up my search????

Can someone help? cessman, Xsecrets?

Thanks

Last edited by Kalaine on Sun Sep 04, 2005 1:48 pm, edited 1 time in total.

Top

Kalaine

Post subject: Could I be onto something

Posted: Sat Sep 03, 2005 4:38 pm

Joined: Sat Sep 03, 2005 4:07 pm

Posts: 4

I saw this http://mysettopbox.tv/phpBB2/viewtopic. ... highlight=
and did an output from dmesg | grep > out.txt and got this:

Code:

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
ivtv: i2c attach [client=(tuner unset),ok]
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: i2c attach [client=tveeprom,ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x008d2598, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: i2c attach [client=cx25840[0],ok]
ivtv: i2c attach [client=wm8775[0],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1 
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4 
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 47
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 3134, itv = 0xe11e4aa0

Why is it detected as a PVR150?

Would be when I posted I'd find a clue....

Top

tjc

Post subject:

Posted: Sun Sep 04, 2005 1:15 pm

Joined: Thu Mar 25, 2004 11:00 am

Posts: 9551

Location: Arlington, MA

This should extract a more complete set of info. http://mysettopbox.tv/phpBB2/viewtopic.php?t=5691&start=7

The fact that the card is identified as a PVR-150 probably isn't good. What does

Code:

lspci -v

show

Top

Kalaine

Post subject:

Posted: Sun Sep 04, 2005 1:51 pm

Joined: Sat Sep 03, 2005 4:07 pm

Posts: 4

Thanks for the reply tjc. Here is the output you requested: I also added some ivtv info to the 1st post.

Code:

0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0
   Memory at dc000000 (32-bit, prefetchable) [size=64M]
   Capabilities: [40] AGP version 3.0
   Capabilities: [60] #08 [2001]

0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
   Subsystem: nVidia Corporation: Unknown device 0c17
   Flags: 66MHz, fast devsel

0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
   Subsystem: nVidia Corporation: Unknown device 0c17
   Flags: 66MHz, fast devsel

0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
   Subsystem: nVidia Corporation: Unknown device 0c17
   Flags: 66MHz, fast devsel

0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
   Subsystem: nVidia Corporation: Unknown device 0c17
   Flags: 66MHz, fast devsel

0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
   Subsystem: nVidia Corporation: Unknown device 0c17
   Flags: 66MHz, fast devsel

0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0
   Capabilities: [48] #08 [01e1]

0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: 66MHz, fast devsel, IRQ 10
   I/O ports at c400 [size=32]
   Capabilities: [44] Power Management version 2

0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
   Memory at e4087000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [44] Power Management version 2

0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
   Memory at e4082000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [44] Power Management version 2

0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
   Memory at e4083000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [44] #0a [2080]
   Capabilities: [80] Power Management version 2

0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
   Memory at e4086000 (32-bit, non-prefetchable) [size=4K]
   I/O ports at b000 [size=8]
   Capabilities: [44] Power Management version 2

0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
   Memory at e4000000 (32-bit, non-prefetchable) [size=512K]
   Capabilities: [44] Power Management version 2

0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
   I/O ports at b400 [size=256]
   I/O ports at b800 [size=128]
   Memory at e4080000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [44] Power Management version 2

0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
   Flags: bus master, 66MHz, fast devsel, latency 0
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
   I/O behind bridge: 00009000-0000afff
   Memory behind bridge: e2000000-e3ffffff
   Prefetchable memory behind bridge: d8000000-dbffffff

0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0
   I/O ports at f000 [size=16]
   Capabilities: [44] Power Management version 2

0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) (prog-if 10 [OHCI])
   Subsystem: ABIT Computer Corp.: Unknown device 1c00
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
   Memory at e4084000 (32-bit, non-prefetchable) [size=2K]
   Memory at e4085000 (32-bit, non-prefetchable) [size=64]
   Capabilities: [44] Power Management version 2

0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
   Flags: bus master, 66MHz, medium devsel, latency 32
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
   Memory behind bridge: e0000000-e1ffffff
   Prefetchable memory behind bridge: d0000000-d7ffffff

0000:01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
   Subsystem: Hauppauge computer works Inc.: Unknown device 8801
   Flags: bus master, medium devsel, latency 64, IRQ 19
   Memory at d8000000 (32-bit, prefetchable) [size=64M]
   Capabilities: [44] Power Management version 2

0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
   Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) Asus A7N8X
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
   I/O ports at 9000 [size=8]
   I/O ports at 9400 [size=4]
   I/O ports at 9800 [size=8]
   I/O ports at 9c00 [size=4]
   I/O ports at a000 [size=16]
   Memory at e3000000 (32-bit, non-prefetchable) [size=512]
   Capabilities: [60] Power Management version 2

0000:02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
   Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
   Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
   Memory at d0000000 (32-bit, prefetchable) [size=128M]
   Capabilities: [60] Power Management version 2
   Capabilities: [44] AGP version 3.0

Top

tjc

Post subject:

Posted: Sun Sep 04, 2005 2:08 pm

Joined: Thu Mar 25, 2004 11:00 am

Posts: 9551

Location: Arlington, MA

Quote:

0000:01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8801
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2

Well it sure doesn't seem to be recognizing your card... You may want to go over to the IVTV wiki and mailing list archives and search for that message "Unknown device 8801".

Top

Kalaine

Post subject: Oh ohhhh!!!!

Posted: Sun Sep 04, 2005 6:57 pm

Joined: Sat Sep 03, 2005 4:07 pm

Posts: 4

Ya know, I have been poking around Google, Gossamer, here and ivtv wiki etc and I think that I may have a PVR150MCE!!!!

I bought it off ebay in a huff and it looks as if I got screwed!!! Well, maybe not, I do not know yet.

26552 Rev. C268 is all over my card and my searches point to PVR150MCE's.

This may be a blessing in disguise now that I can pursue 150 threads instead of 250.

Does anyone out there have there svideo input from there capture card working with a PVR150MCE? Also, are what version of IVTV are you running? I have the stock 2.0 (rc3j) from R5A16 and am getting the black and white....

Off to search more.

tjc , thanks for your help today.

Top

Page 1 of 1

[ 6 posts ]

Board index KnoppMyth Hardware

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 23 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum