I went though a clean auto install of R5A22 on hardware that was previously running R5A16 fine. After the R5A22 install my Leadtek Winfast TV2000XP Deluxe tuner worked, but all channels were in B/W or faded color.

I editted /etc/modules and changed the bttv and tuner lines as follows



After a reboot the color issue was corrected.

Remote Control Issue:

During the install on the Remote menu I chose option 40)Winfast RM-0010, but the script displayed did not contain details on this remote and continued setup.
After install I ran choosing option 40 again (same results), and option 22)Leaktek, the script displayed error on line 386.

I see the configuration files for RM-0010 in /usr/local/share/knoppmyth/remotes/winfast_rm0010/etc

How can I go about fixing the lirc-reconfig.sh script to configure this remote or how can I manually install?

This is the howto I wrote for setup on the Leadtek Winfast TV2000XP Deluxe tuner card and RM-0010 remote for R5A16, I would like to update to include R5A22 instructions.
http://www.knoppmythwiki.org/index.php? ... V2000XPdlx

Other than above R5A22 looks great, detected Nvidia card perfect.
Thanks,

Figured it out.
Had to run command

Choose YES, YES, Option 5 (TV Card), Option B (Winfast TV2000/XP (card=34))

Choose YES, YES

Copy lirc config files to correct locations



Rebooted and worked fine.