| LinHES Forums http://forum.linhes.org/ |
|
| No Audio -- NEED HELP http://forum.linhes.org/viewtopic.php?f=2&t=7415 |
Page 1 of 1 |
| Author: | someone7663663 [ Fri Dec 16, 2005 11:16 pm ] |
| Post subject: | No Audio -- NEED HELP |
I've installed knoppmyth and there is no audio. I am using the onboard 7.1 channel audio codec RealTek ALC880 and nothing happenes. I have gone through alsaconfig and it could not dectect it. Does anyone know what to do. Anything would help. I am using this motherboard http://tw.giga-byte.com/MotherBoard/Products/Products_Spec_GA-K8N51GMF-9.htm# |
|
| Author: | tjc [ Sat Dec 17, 2005 11:08 am ] |
| Post subject: | |
Did you make sure it was enabled in the BIOS? What does running lspci show? |
|
| Author: | someone7663663 [ Mon Dec 19, 2005 7:22 pm ] |
| Post subject: | |
Yes, everything in the BIOS is setup up right and it works under windows. I just don't know how to do anything in linux |
|
| Author: | tjc [ Mon Dec 19, 2005 8:54 pm ] |
| Post subject: | |
Have you searched here in the forums and on the wiki? There are several write ups for getting SPDIF working... |
|
| Author: | Mnemic [ Tue Dec 20, 2005 8:31 am ] |
| Post subject: | |
http://alsa.opensrc.org/DigitalOut is one of the best howtos I have found in regards to digital alsa. Key things to look at are /proc/asound/devices aplay -l and aplay -L mplayer, aplay, and alsaplayer all allow you to specify which device to output too, just need to read some docs, and go through the basics. Another thing, if you are using Optical SPDIF, verify the cable and Receving side of the SPDIF are working (use a dvd player or something). I had a ton of problems come to find out I had a bad optical cable. When the Optical didn't work, I plugged in a Coax, and it immedately started working. |
|
| Author: | someone7663663 [ Thu Dec 22, 2005 5:16 pm ] |
| Post subject: | |
I am not using SPFID, I am just using regular computer speaker cables. I can get the linux driver from realtek's site but I don't know what to do with it after that (I'm a noob with linux) |
|
| Author: | cesman [ Fri Dec 23, 2005 8:35 am ] |
| Post subject: | |
Doesn't the software from teh site include some instructions? |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|