View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
rping
PostPosted: Thu Dec 22, 2005 6:32 pm 
Offline
Joined: Thu Dec 22, 2005 6:27 pm
Posts: 2
Hey guys, I've got everything working so far with my hauppauge pvr-150. I can't get the tv out working. I have changed the BIOS settings and nothing happens on the tv. Here is my XF86Config-4 that I am using:

Code:
Section "ServerLayout"
   Identifier     "XFree86 Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
   Option "AllowMouseOpenFail"  "true"
   
EndSection

Section "Files"
   RgbPath      "/usr/X11R6/lib/X11/rgb"
   ModulePath   "/usr/X11R6/lib/modules"
   FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
   FontPath     "/usr/X11R6/lib/X11/fonts/misc"
   FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
   FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
   FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
   FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
   FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
   FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
   FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
#   FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
#   FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
   FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
   FontPath     "/usr/share/fonts/ttf/western"
   FontPath     "/usr/share/fonts/ttf/decoratives"
   FontPath     "/usr/share/fonts/truetype"
   FontPath     "/usr/share/fonts/truetype/openoffice"
   FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
   FontPath     "/usr/share/fonts/latex-ttf-fonts"
   FontPath     "/usr/X11R6/lib/X11/fonts/defoma/CID"
   FontPath     "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
   Load  "GLcore"
   Load  "dbe"
   Load  "dri"
   Load  "extmod"
   Load  "glx"
        Load  "bitmap" # bitmap-fonts
   Load  "speedo"
   Load  "type1"
   Load  "freetype"
   Load  "record"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "keyboard"
        Option      "CoreKeyboard"
   Option "XkbRules" "xfree86"
   Option "XkbModel" "pc105"
   Option "XkbLayout" "us"

EndSection

Section "InputDevice"
   Identifier  "Serial Mouse"
   Driver      "mouse"
   Option      "Protocol" "Microsoft"
   Option      "Device" "/dev/ttyS0"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
   Identifier  "PS/2 Mouse"
   Driver      "mouse"
   Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
   Option      "Device" "/dev/psaux"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
   Option      "SendCoreEvents"   "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config



Section "Monitor"
   Identifier "NTSC"
   Option   "TVStandard" "NTSC-M"
   Option   "ConnectedMonitor" "TV"
   Option   "TVOutFormat" "COMPOSITE"
   VendorName "Canada/USA/Japan"
   ModelName "Televison"
   DisplaySize 530 400
   HorizSync 14-50
   # HorizSync 14-29
   VertRefresh 60
   # VertRefresh 50-60
   Modeline "NTSCi" 14.31818 640 728 792 896 400 444 452 526 Interlace +Hsync +Vsync
   Modeline "TV640x480" 16.90 640 792 864 1080 480 532 537 625 -hsync -vsync interlace
EndSection

Section "Device"
   ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
   Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
   Driver      "i810"
   VendorName  "All"
   BoardName   "All"
#   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "NTSC"
   DefaultColorDepth 16
   DefaultDepth 16
   SubSection "Display"
   Depth 16
   Modes "ntsc_640x480"
   EndSubSection
EndSection

Section "DRI"
   Mode 0666
EndSection


I've tried numerous other configurations to no avail.
Thanks for any help!
Top
 Profile  
 
Ragnar1211
 Post subject:
PostPosted: Thu Dec 22, 2005 9:10 pm 
Offline
Joined: Thu Dec 15, 2005 11:21 am
Posts: 8
When you say that you cannot get tv-out working do you mean:

1) I can see an image on the tv but it is garbled due to a refresh rate that is too high?

2) I can see an image on the tv but it is too small to read?

3) The tv is black, no output at all.

This will help.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu