View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
assailant
PostPosted: Mon Jan 09, 2006 5:26 am 
Offline
Joined: Sun Jan 08, 2006 8:15 am
Posts: 12
Location: Geraldton, Western Australia
Hi, ive successfully installed knoppmyth R5A9 on a brand new machine with an avermedia hybrid dvb card.

unfortunately i havent been able to successfully view any tv in knoppmyth as yet..

machine specs:

celeron 3.06ghz
512mb ddr400
asus p4p800s
lg dvd burner
sony cd burner
seagate 40gb 7200rpm pata (OS drive)
seagate 120gb sata2 (storage drive)


the output from 'dmesg' is rather long and im not 100% on what parts would be of interest to anyone who could help, so instead of pasting in here (and annoying the crap out of everyone im sure) ive got the dmesg output here

thankyou to anyone who can help :)

<edit> typo
Top
 Profile  
 
mad_paddler
 Post subject:
PostPosted: Mon Jan 09, 2006 5:44 am 
Offline
Joined: Sun Jun 12, 2005 2:39 pm
Posts: 464
Location: UK
Knoppmyth r5a9 is nearly a year old!! You might have better luck with the latest version r5a30
Top
 Profile  
 
assailant
 Post subject:
PostPosted: Mon Jan 09, 2006 6:17 am 
Offline
Joined: Sun Jan 08, 2006 8:15 am
Posts: 12
Location: Geraldton, Western Australia
oh for crying out loud.. im gonna smack my mate who downloaded this copy while i was putting the machine together..

thanks for help... ill try the latest and report back..
Top
 Profile  
 
snappytom
 Post subject:
PostPosted: Mon Jan 09, 2006 8:26 am 
Offline
Joined: Mon Jan 09, 2006 8:24 am
Posts: 1
Location: Perth - Western Australia
sif blame me

there was only one build on the local mirror :?
Top
 Profile  
 
assailant
 Post subject:
PostPosted: Mon Jan 09, 2006 10:38 am 
Offline
Joined: Sun Jan 08, 2006 8:15 am
Posts: 12
Location: Geraldton, Western Australia
ok so ive installed R5A30, tried to configure it as best i could, used standard V4L but when i go to watch tv all i get is a blank black screen.

again, ive copied the dmesg output to a file here

i get this from my lspci -v

Code:
0000:02:0a.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
        Subsystem: Avermedia Technologies Inc: Unknown device 2c00
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [40] Power Management version 1
Top
 Profile  
 
Xsecrets
 Post subject:
PostPosted: Mon Jan 09, 2006 10:54 am 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
My guess would be that this line is your problem.

saa7134[0]: subsystem: 1461:2c00, board: UNKNOWN/GENERIC [card=0,autodetected]

I have no idea what card number it should be google would be the place to look for that.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets
Top
 Profile  
 
mad_paddler
 Post subject:
PostPosted: Mon Jan 09, 2006 11:33 am 
Offline
Joined: Sun Jun 12, 2005 2:39 pm
Posts: 464
Location: UK
If its a DVB card, then you should select DVB not V4L!
Top
 Profile  
 
hotspoons
 Post subject:
PostPosted: Mon Jan 09, 2006 1:46 pm 
Offline
Joined: Wed Jun 08, 2005 7:51 pm
Posts: 38
I had to compile a much newer kernel from source than what comes with knoppmyth (even R5A22...don't know about what kernel version 30 comes with...) to make my AverHD MCE A180 be detected properly by the kernel. If you apply all patches to Kernel ver. 2.6.14, it will work, but I just grabbed the 2.6.15 rc7 image and used that as all patches were already applied.

The MCE A180 uses the same backend chip (SAA7134) as whatever card you are using, and uses an NXT2002 front end chip, which appears to be a kernel module under DVB, but I can't select it. I will need to do more investigation as once the NXT chip is picked up, I should be able to finally use the DVB module for this card.
Top
 Profile  
 
assailant
 Post subject:
PostPosted: Tue Jan 10, 2006 4:25 am 
Offline
Joined: Sun Jan 08, 2006 8:15 am
Posts: 12
Location: Geraldton, Western Australia
ok so ive changed the card type to dvb, but neither card 0,1,2 or 3 work.
i get a key colour error.

im running Linux version 2.6.13.2-chw-3 from R5A30.

is there something i should update for it to pickup the card?
Top
 Profile  
 
Greg Frost
 Post subject:
PostPosted: Tue Jan 10, 2006 4:39 am 
Offline
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location: Adelaide, Australia
Well, from hotspoon's post, it sounds like you want kernel version at least 2.6.15 rc7, so you will have to download that (or a later version if there is one) and build and install that. If you are notr familiare with building kernels, there are some good examples of how to do it on the forum.
Top
 Profile  
 
assailant
 Post subject:
PostPosted: Sat Jan 14, 2006 2:59 am 
Offline
Joined: Sun Jan 08, 2006 8:15 am
Posts: 12
Location: Geraldton, Western Australia
whilst googling for linux support for my card i came across this page http://pvrhw.goldfish.org/bttv/

its a list of cards and under my card it has this:



Code:
aa7134[0]: found at 0000:00:0a.0, rev: 1, irq: 5, latency: 32, mmio: 0xdfffec00
saa7134[0]: subsystem: 1461:2c00, board: AverMedia M156 / Medion 2819 [card=22,insmod option]
saa7134[0]: board init: gpio is 20600
saa7134[0]: registered input device for IR
saa7134[0]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00
saa7134[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c scan: found device @ 0x1e  [???]
saa7134[0]: i2c scan: found device @ 0x86  [tda9887]
saa7134[0]: i2c scan: found device @ 0xa0  [eeprom]
saa7134[0]: i2c scan: found device @ 0xc0  [tuner (analog)]
 : chip found @ 0xc0 (saa7134[0])
 : TEA5767 detected.
tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio


what does this mean? can i use that ^ in my knoppmyth install at all?
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Sat Jan 14, 2006 3:14 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Is your card supported in a newer kernel (2.6.15-rc7)?

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
assailant
 Post subject:
PostPosted: Sat Jan 14, 2006 10:53 pm 
Offline
Joined: Sun Jan 08, 2006 8:15 am
Posts: 12
Location: Geraldton, Western Australia
i dont know.

ive done a bit of googling but havent found anything.

where would i find whether this card is supported by a newer kernel?
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu