bump
Anyone?
| LinHES Forums http://forum.linhes.org/ |
|
| PVR-500 on R5A 30.1 ... Upgraded with a problem http://forum.linhes.org/viewtopic.php?f=2&t=7889 |
Page 1 of 1 |
| Author: | comcipher [ Sun Jan 15, 2006 12:13 pm ] |
| Post subject: | PVR-500 on R5A 30.1 ... Upgraded with a problem |
I was on an older version of Knoppmyth, and for the most part it was running great. I ended up having to move and reset all my channels and the like, so I decided I may as well do an upgrade to take advantage of all the bug fixes and the like. Unfortunatly, after upgrading I can't watch live TV, and if I try the backend seems to crash, or at least the frontend can't establish a connection. All I see is black for about 15 seconds, then it kicks me back out to the main menu. If I try to watch recordings before that, I can, and they play fine. I've tried installing the firmware again and a couple of other things, but nothing seems to be working right. Anyone have any suggestions as to how to fix this problem? Any help is greatly appreciated!!! |
|
| Author: | tjc [ Sun Jan 15, 2006 12:31 pm ] |
| Post subject: | |
See the Wiki page on http://www.knoppmythwiki.org/index.php?page=CheckingLogFiles, follow the instructions for how get the ivtv info from dmesg, and post it here. |
|
| Author: | comcipher [ Sun Jan 15, 2006 7:05 pm ] |
| Post subject: | |
Here is the output of "sed -n '/= START INIT IVTV/,/= END INIT IVTV/p' </var/log/dmesg | more" Thanks! ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 19 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2995726 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] ivtv0: This is the first unit of a PVR500 cx25840: Unknown parameter `i2c_enable' ivtv0: Failed to load module cx25840 ivtv0 warning: i2c client addr: 0x44 not found for command 0x400464c9! wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 ivtv0 warning: i2c client addr: 0x44 not found for command 0x40046403! ivtv0 warning: i2c client addr: 0x44 not found for command 0x40046404! ivtv0 warning: i2c client addr: 0x44 not found for command 0x4004646e! ivtv0 warning: i2c client addr: 0x44 not found for command 0x40046403! ivtv0 warning: i2c client addr: 0x44 not found for command 0x80287610! ivtv0 warning: i2c client addr: 0x44 not found for command 0x40287611! ivtv0 warning: i2c client addr: 0x44 not found for command 0x40046406! ivtv0 warning: i2c client addr: 0x44 not found for command 0x4004760f! ivtv0 warning: i2c client addr: 0x44 not found for command 0x40046406! ivtv0 warning: i2c client addr: 0x44 not found for command 0x80287610! ivtv0 warning: i2c client addr: 0x44 not found for command 0x40287611! ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 20 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2995726 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit cx25840: Unknown parameter `i2c_enable' ivtv1: Failed to load module cx25840 ivtv1 warning: i2c client addr: 0x44 not found for command 0x400464c9! ivtv1: loading /lib/modules/ivtv-fw-enc.bin ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv1 warning: i2c client addr: 0x44 not found for command 0x40046403! ivtv1 warning: i2c client addr: 0x44 not found for command 0x40046404! ivtv1 warning: i2c client addr: 0x44 not found for command 0x4004646e! ivtv1 warning: i2c client addr: 0x44 not found for command 0x40046403! ivtv1 warning: i2c client addr: 0x44 not found for command 0x80287610! ivtv1 warning: i2c client addr: 0x44 not found for command 0x40287611! ivtv1 warning: i2c client addr: 0x44 not found for command 0x40046406! ivtv1 warning: i2c client addr: 0x44 not found for command 0x4004760f! ivtv1 warning: i2c client addr: 0x44 not found for command 0x40046406! ivtv1 warning: i2c client addr: 0x44 not found for command 0x80287610! ivtv1 warning: i2c client addr: 0x44 not found for command 0x40287611! ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== |
|
| Author: | comcipher [ Mon Jan 16, 2006 9:58 pm ] |
| Post subject: | |
bump Anyone?
|
|
| Author: | cesman [ Mon Jan 16, 2006 10:45 pm ] |
| Post subject: | |
Did you check the link that tjc posted? Did you check the backend log? |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|