| LinHES Forums http://forum.linhes.org/ |
|
| R5A30.1 and Hauppauge silver remote http://forum.linhes.org/viewtopic.php?f=2&t=7904 |
Page 1 of 1 |
| Author: | miker [ Mon Jan 16, 2006 7:06 am ] |
| Post subject: | R5A30.1 and Hauppauge silver remote |
Is anyone else having a problem getting the silver remote working on R5A30.1 with the Hauppauge 250 and the silver remote? Its worked for me on R5A16 and 22 right after a freash install. After a fresh install of R5A30.1 I cant get it working at all. When I pick the gray remote option it 1/2 works. Only some of the buttons pressed will peerform a function. Mike ________ Medical marijuana grow |
|
| Author: | joelbradshaw [ Mon Jan 16, 2006 7:48 am ] |
| Post subject: | |
I've had a problem with my remote all along. I've been able to get the thing to work for about 30 seconds. (really -- enough to get 6 lines out of irw) I'm sure the issue is connection with the (#*&$) ir cable. (at least in my case) If anyone has any ideas on how to verify this, I'd apprecaite it. My assumptions are: 1. If the configuration file was wrong, it wouldn't work at all. (yes, I know if the config file was wong the wrong buttons might be identified, but they would all show something, right? even if the identification was wrong) 2. The fact that I got output in irw which went away the minute I turned the case around, points heavily towards an intermittent connection. I'm now planning on taking the board out of the box, soldering a new connector on a short cable to make sure the damn thing seats correctly on a regular basis, failing that, I'll just snip off the connector on the ir cable, and solder it directly to the circut board. Radical I know, but the remote not working is the last piece for me that I'm truely frustrated with in the knoppmyth experience. and I can't blame anyone on the 'software side' for a hardware issue. |
|
| Author: | miker [ Mon Jan 16, 2006 8:56 am ] |
| Post subject: | |
My case is definately not an internittent connection. I ran some tests and rules that out. I have a silver remote so when I select: (16)Hauppage and (c) silver I cannot control the screen. I could before with all of the previous versions of Knoppmyth. I select (b) gray remote and a few functions will work. Mike ________ MASTURBATION MOVIES |
|
| Author: | ryanpatterson [ Mon Jan 16, 2006 9:29 am ] |
| Post subject: | |
Mine "worked" after selecting the silver remote. But several of the buttons were named the wrong thing. So I had to reassign the functions in "/home/mythtv/.mythtv/lircrc". Run irw to see what command each button makes; change the values in "/home/mythtv/.mythtv/lircrc"; reboot. And you should have a working remote. |
|
| Author: | miker [ Tue Jan 17, 2006 7:02 am ] |
| Post subject: | |
I followed your instructions ryanpatterson and have things set up perfectly now. Thanks for your help. Mike ________ HYDROGEN 7 |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|