Hi All,

I'm having problems getting KnoppMyth to use my DVICO Fusion Plus tuner card.

I am using R5A30-2 with specs:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~­ ­ ~~~~~~
Intel Pentium 4 (not Celeron) 1.6GHz
Intel 845PE chipset, 400/533MHz FSB
256MB DDR RAM
60GB 7200rpm 8MB cache Ultra ATA 100 hard drive
Pioneer A06 DVDRW
64MB NVidia GForce 4 MX440 AGP video, TV out
Intel 100Mb LAN.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~­ ­ ~~~~~~

Anyhoo, I have KnoppMyth up and running (praises Cesman) and completed Mythfilldatabase.

Knoppmyth detects the DVICO card, but does allow it to be selected in mythtv-setup. Instead I get "cannot get card #0".

I did modprobe cx88-dvb and did lspci as below:

lspci

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~­ ­ ~~~~~~~~~~~~~~~~~
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 82)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)
0000:02:00.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:02:00.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05)
0000:02:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~­ ­ ~~~~~~~~~~~~~~~

Anybody got any ideas ?

I am relatively Nooby, so I beg your patience if I ask dumb questions.

Cheers

_________________
Armaments, Chapter2, Verses 9 to 21