| Author |
Message |
|
kmkittre
|
 Posted: Fri Feb 10, 2006 12:13 am |
|
|
Joined: Tue Jul 12, 2005 8:01 am
Posts: 670
Location:
Salem, MA
|
I'm seriously at a loss. It looks like the card installs properly, I don't have any errors, but the status of the tuner associated with the card is:
"currently not connected" in mythtweb and "not available" when I look at tuner status via a frontend. Here is my ivtv info from the syslog:
Code: Feb 9 22:58:52 mythtvbackend kernel: ivtv: ==================== START INIT IVTV ====================
Feb 9 22:58:52 mythtvbackend kernel: ivtv: version 0.4.2 (tagged release) loading
Feb 9 22:58:52 mythtvbackend kernel: ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
Feb 9 22:58:52 mythtvbackend kernel: ivtv: In case of problems please include the debug info between
Feb 9 22:58:52 mythtvbackend kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Feb 9 22:58:52 mythtvbackend kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
Feb 9 22:58:52 mythtvbackend kernel: ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
Feb 9 22:58:52 mythtvbackend kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
Feb 9 22:58:52 mythtvbackend kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Feb 9 22:58:52 mythtvbackend kernel: tveeprom: ivtv version
Feb 9 22:58:52 mythtvbackend kernel: tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8226227
Feb 9 22:58:52 mythtvbackend kernel: tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
Feb 9 22:58:52 mythtvbackend kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Feb 9 22:58:52 mythtvbackend kernel: tveeprom: audio processor = CX25841 (type = 23)
Feb 9 22:58:52 mythtvbackend kernel: tveeprom: decoder processor = CX25841 (type = 1c)
Feb 9 22:58:52 mythtvbackend kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Feb 9 22:58:52 mythtvbackend kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Feb 9 22:58:52 mythtvbackend kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Feb 9 22:58:52 mythtvbackend kernel: cx25840 0-0044: ivtv driver
Feb 9 22:58:52 mythtvbackend kernel: cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
Feb 9 22:58:55 mythtvbackend kernel: cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
Feb 9 22:58:55 mythtvbackend kernel: ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
Feb 9 22:58:55 mythtvbackend kernel: wm8775 0-001b: ivtv driver
Feb 9 22:58:55 mythtvbackend kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
Feb 9 22:58:55 mythtvbackend kernel: ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
Feb 9 22:58:56 mythtvbackend kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Feb 9 22:58:56 mythtvbackend kernel: ivtv0: Encoder revision: 0x02050032
Feb 9 22:58:56 mythtvbackend kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Feb 9 22:58:56 mythtvbackend kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Feb 9 22:58:56 mythtvbackend kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Feb 9 22:58:56 mythtvbackend kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Feb 9 22:58:56 mythtvbackend kernel: tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
Feb 9 22:58:56 mythtvbackend kernel: ivtv0: Initialized WinTV PVR 150, card #0
Feb 9 22:58:56 mythtvbackend kernel: ivtv: ==================== END INIT IVTV ====================
I've hit a brick wall, I don't know what to try next. Please help if you can.
|
|
| Top |
|
 |
|
kmkittre
|
Posted: Sun Feb 12, 2006 11:01 pm |
|
|
Joined: Tue Jul 12, 2005 8:01 am
Posts: 670
Location:
Salem, MA
|
|
Okay, it seems the problem is not with the tv card. I set this machine up as a master backend instead of a slave backend and the card works fine. So what could I be doing that is preventing my master backend from seeing the tv card on the slave backend? At least to the point where it sees the card, but says it is not connected? Do I need to give explicit permissions to /dev/video0?
|
|
| Top |
|
|
|
kmkittre
|
Posted: Mon Feb 13, 2006 11:20 am |
|
|
Joined: Tue Jul 12, 2005 8:01 am
Posts: 670
Location:
Salem, MA
|
|
Okay, here was my problem:
masterbackend:r5a16
slavebackend:r5a30.2
When I setup the slave backend with r5a16 the card was recognized. Now I just need to get around to doing a full upgrade to both machines, but for now it all works.
|
|
| Top |
|
|
|
kmkittre
|
Posted: Mon Feb 13, 2006 12:16 pm |
|
|
Joined: Tue Jul 12, 2005 8:01 am
Posts: 670
Location:
Salem, MA
|
|
DAMN!!!
I had three tuners listed, two of them apparently working. I ran mythtv-setup to clear the cards so that only two tuners were listed. Now I am right back where I started. I have two tuners, but again the pvr-150 in the slave backend is listed as not connected or not available. This is so frustrating.
|
|
| Top |
|
|
|
kmkittre
|
Posted: Mon Feb 13, 2006 5:03 pm |
|
|
Joined: Tue Jul 12, 2005 8:01 am
Posts: 670
Location:
Salem, MA
|
Okay, here's where I'm at:
I have installed R5A30.2 on both the master and slave backends, and it still is not working. However, I think I my have found out what the problem is:
MythtvBackend isn't running on the slave backend.
Here is the error log:
Code: 2006-02-13 15:56:05.595 New DB connection, total: 1
2006-02-13 15:56:05.616 Unable to connect to database!
2006-02-13 15:56:05.621 Driver error was [1/2002]:
QMYSQL3: Unable to connect
Database error was:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
2006-02-13 15:56:05.626 Failed to init MythContext, exiting.
It looks like the backend is trying to connect to the local database instead of the one on the master. Why is this? How can I change it?
thanks.
|
|
| Top |
|
|
|
kmkittre
|
Posted: Mon Feb 13, 2006 5:15 pm |
|
|
Joined: Tue Jul 12, 2005 8:01 am
Posts: 670
Location:
Salem, MA
|
I got this from the mythtv.org docs:
Quote: NOTE: Slave backends must not run a local MySQL daemon. By default, they will connect to their local daemon rather than the central database, causing unexpected behavior such as empty "Watch Recordings" lists and a failure to locate the Video Sources defined on the master backend. Modify the /usr/local/share/mythtv/mysql.txt file on all slave backends to ensure that the DBHostName has the address of the MySQL server.
now, following cesman's linHES documentation he has us do something similar, but in a different location. Does KnoppMyth's backend look for this configuration file in a different place?
|
|
| Top |
|
|
|
kmkittre
|
Posted: Mon Feb 13, 2006 5:23 pm |
|
|
Joined: Tue Jul 12, 2005 8:01 am
Posts: 670
Location:
Salem, MA
|
|
SUCCESS!!!!
Okay, here's what you want to edit:
/etc/mythtv/mysql.txt
Cecil, maybe it's time to update linHES? Or maybe I should put an entry into the wiki for slave backends...
|
|
| Top |
|
|
|
JohnNJ
|
Posted: Fri Feb 17, 2006 1:13 am |
|
|
Joined: Thu Jan 05, 2006 11:05 pm
Posts: 3
|
I have looked everywhere and tried everything. In fact I followed someone else's post and I hosed the ability of the IR Receiver.
I installed R5A30.1 and the remote works automatically but following another post suggestion to upgrade ivtv to 0.4.2. I now can't even get the remote to work. I am thinking of moving over to serial port based receiver and transmitter.
Below is my log output
Code: Feb 14 22:20:53 media kernel: ivtv: ==================== START INIT IVTV ====================
Feb 14 22:20:53 media kernel: ivtv: version 0.4.2 (tagged release) loading
Feb 14 22:20:53 media kernel: ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
Feb 14 22:20:53 media kernel: ivtv: In case of problems please include the debug info between
Feb 14 22:20:53 media kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Feb 14 22:20:53 media kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
Feb 14 22:20:53 media kernel: ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
Feb 14 22:20:53 media kernel: tveeprom: ivtv version
Feb 14 22:20:53 media kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Feb 14 22:20:53 media kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Feb 14 22:20:53 media kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Feb 14 22:20:53 media kernel: cx25840 0-0044: ivtv driver
Feb 14 22:20:53 media kernel: cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
Feb 14 22:20:56 media kernel: ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
Feb 14 22:20:56 media kernel: wm8775 0-001b: ivtv driver
Feb 14 22:20:56 media kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
Feb 14 22:20:56 media kernel: ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
Feb 14 22:20:56 media kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
Feb 14 22:20:57 media kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Feb 14 22:20:57 media kernel: ivtv0: Encoder revision: 0x02050032
Feb 14 22:20:57 media kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Feb 14 22:20:57 media kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Feb 14 22:20:57 media kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Feb 14 22:20:57 media kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Feb 14 22:20:57 media kernel: tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
Feb 14 22:20:57 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
Feb 14 22:20:57 media kernel: ivtv0: Initialized WinTV PVR 250, card #0
Feb 14 22:20:58 media kernel: ivtv: ==================== END INIT IVTV ====================
Feb 14 22:20:58 media kernel: ivtv0: i2c attach to card #0 ok [client=Hauppauge PVR150 IR RX, addr=71]
Feb 14 22:20:58 media kernel: ivtv0: i2c attach to card #0 ok [client=Hauppauge PVR150 IR TX, addr=70]
Feb 14 22:21:01 media kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
|
|
| Top |
|
|
View unanswered posts
View active topics
KnoppMyth 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register