| LinHES Forums http://forum.linhes.org/ |
|
| dazed and confused -- OSD broken http://forum.linhes.org/viewtopic.php?f=2&t=8807 |
Page 1 of 1 |
| Author: | mac [ Sat Mar 04, 2006 9:42 am ] |
| Post subject: | dazed and confused -- OSD broken |
I am lost on this one. I would love it someone could give me some ideas. My mythtv works well except for the OSD. Whenever the OSD should be showing up on the screen I get this message in syslog: ivtv0-osd warning: Size is overflowing the framebuffer 1638400, only 1382400 available and this one in the X server log: (EE) IVTVDEV(0): FBIOBLANK: Invalid argument my ---- fb0 is 1638400 -- vesafb fb1 is 1382400 -- pvr350 tvout -- Thanks, Martin kernel: vesafb: framebuffer at 0xf6000000, mapped to 0xe0880000, using 6144k, total 16320k kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=8 kernel: vesafb: protected mode interface info at c000:03b8 kernel: vesafb: scrolling: redraw kernel: ivtv: ==================== START INIT IVTV ==================== kernel: ivtv: version 0.4.0 (tagged release) loading kernel: ivtv: Linux version: 2.6.11.9-chw-2 preempt 586 gcc-3.3 kernel: ivtv: In case of problems please include the debug info kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when kernel: ivtv: mailing the ivtv-devel mailinglist. kernel: ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based) kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 kernel: PCI: setting IRQ 10 as level-triggered kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10 kernel: tveeprom: ivtv version kernel: tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8208257 kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) kernel: tveeprom: audio processor = MSP4448 (type = 1b) kernel: tveeprom: decoder processor = SAA7115 (type = 13) kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] kernel: msp34xx: ivtv version kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode kernel: msp34xx: $Id$ compiled on: Nov 25 2005 19:04:01 kernel: ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40] kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] kernel: ivtv0: loading /lib/modules/ivtv-fw-enc.bin kernel: ivtv0: loading /lib/modules/ivtv-fw-dec.bin kernel: ivtv0: Encoder revision: 0x02050032 kernel: ivtv0: Decoder revision: 0x02020023 kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) kernel: ivtv0: Create encoder radio stream kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) kernel: ivtv0: Create decoder VOUT stream kernel: ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) kernel: ivtv0: loading /lib/modules/ivtv_init_mpeg.bin kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 kernel: ivtv0: Initialized WinTV PVR 350, card #0 kernel: ivtv: ==================== END INIT IVTV ==================== kernel: ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) kernel: ivtv0-osd warning: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. kernel: ivtv0-osd: screen coords: [0 0] -> [720 480] kernel: ivtv0-osd: original global alpha = 208 kernel: ivtv0-osd: current OSD state = 39 kernel: ivtv0-osd: new global alpha = 208 (1 255 0) kernel: ivtv0-osd: framebuffer at 0xed510000, mapped to 0xe2010000, size 1350k kernel: ivtv0-osd: mode is 720x480x32, linelength=2880 kernel: ivtv0-osd: fb1: iTVC15 TV out frame buffer device kernel: ivtv0: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total) kernel: cx2388x v4l2 driver version 0.0.4 loaded kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) kernel: ivtv0: i2c attach to card #0 ok [client=Hauppauge IR, addr=18] ================ Section "Monitor" Identifier "NTSC Monitor" HorizSync 30-68 VertRefresh 50-120 Mode "720x480" # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz DotClock 34.564 HTimings 720 752 840 928 VTimings 480 484 488 504 Flags "-HSync" "-VSync" EndMode Option "DPMS" EndSection Section "Device" Identifier "Hauppauge PVR 350 iTVC15 Framebuffer" Driver "ivtvdev" Option "fbdev" "/dev/fb1" Option "ivtv" "/dev/fb1" Option "TVOverscan" "0.3" BusID "PCI:0:13:0" EndSection Section "Screen" Identifier "TV Screen" Device "Hauppauge PVR 350 iTVC15 Framebuffer" Monitor "NTSC Monitor" DefaultDepth 24 DefaultFbbpp 32 Subsection "Display" Depth 24 FbBpp 32 Modes "720x480" EndSubsection EndSection =============== |
|
| Author: | mac [ Sat Mar 11, 2006 9:42 am ] |
| Post subject: | |
Worked this out. See thread: http://mysettopbox.tv/phpBB2/viewtopic.php?t=8842 |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|