LinHES Forums • View topic - [FIXED!] Can't get 2nd tuner to work(PVR 150 Avermedia M179)

Board index KnoppMyth Hardware

All times are UTC - 6 hours

[FIXED!] Can't get 2nd tuner to work(PVR 150 Avermedia M179)

Page 1 of 1

[ 11 posts ]

Print view

Previous topic Next topic

Author

Message

Dinki

Post subject: [FIXED!] Can't get 2nd tuner to work(PVR 150 Avermedia M179)

Posted: Thu Mar 09, 2006 10:13 pm

Joined: Fri Dec 26, 2003 2:25 pm

Posts: 244

Today I finally upgraded from R4v(last one) to the current R5 release. I did an autoupgrade and after a bit of trouble with incompatible ivtv settings from the older install, I managed to get the Avermedia M179 to work fine. The next thing I did was add the PVR 150. The card was detected and I configured it as well as the M179 in mythtv-setup.

When watching live tv, the M179 plays fine (/dev/video0), but the PVR 150 gave the dreaded black screen when watching live tv. I then pulled the M179 and used just the PVR 150. It worked flawlessly. I then try adding the M179 back into the system. I got the same results as before, but the PVR 150 (now /dev/video0) worked fine and now the M179 (/dev/video1) showed the black screen on watch live tv.

Is there something I need to set in order to get these cards to 'play nice'? These are my first hardware encoder cards, so I am very green with the ivtv stuff.

Any help/tips/leads is greatly appreciated.

Last edited by Dinki on Sun Mar 12, 2006 6:31 pm, edited 1 time in total.

Top

Dinki

Post subject:

Posted: Fri Mar 10, 2006 8:21 am

Joined: Fri Dec 26, 2003 2:25 pm

Posts: 244

Perhaps I should have included more information:

lsmod

Code:

mythtv@mythtv:~ $ lsmod
Module                  Size  Used by
sg                     30496  0 
nvidia               3916572  12 
ehci_hcd               31368  0 
pci_hotplug            27716  0 
sis_agp                 8068  1 
8250_pnp               10240  0 
pcspkr                  5344  0 
lirc_pvr150            18360  1 
lirc_dev               14852  1 lirc_pvr150
ipv6                  240128  14 
ttusb_dec              22028  0 
ttusbdecfe              4992  1 ttusb_dec
dvb_ttusb_budget       30364  0 
cx22700                 7044  1 dvb_ttusb_budget
budget_av              14464  0 
tda10021                7684  1 budget_av
budget_ci              12288  0 
budget                 10752  0 
s5h1420                 9860  1 budget
budget_core             8836  3 budget_av,budget_ci,budget
dvb_ttpci              88004  0 
l64781                  8452  2 budget,dvb_ttpci
tda8083                 7044  3 dvb_ttusb_budget,budget,dvb_ttpci
stv0297                 9216  1 dvb_ttpci
sp8870                  8588  1 dvb_ttpci
ttpci_eeprom            4352  2 budget_core,dvb_ttpci
saa7146_vv             44672  2 budget_av,dvb_ttpci
saa7146                16520  6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
mt312                   8964  0 
tda1004x               14724  3 dvb_ttusb_budget,budget_av,budget_ci
ves1820                 7172  3 dvb_ttusb_budget,budget,dvb_ttpci
stv0299                11912  5 dvb_ttusb_budget,budget_av,budget_ci,budget,dvb_ttpci
ves1x93                 7940  2 budget,dvb_ttpci
evdev                   9088  0 
dvb_bt8xx              11780  0 
nxt6000                 8580  1 dvb_bt8xx
mt352                   7812  1 dvb_bt8xx
sp887x                  8836  1 dvb_bt8xx
dst_ca                 14848  1 dvb_bt8xx
or51211                11140  1 dvb_bt8xx
dst                    19332  2 dvb_bt8xx,dst_ca
bt878                  10200  2 dvb_bt8xx,dst
cx24110                 8836  1 dvb_bt8xx
dvb_core               75304  9 ttusb_dec,dvb_ttusb_budget,budget_av,budget_ci,budget,budget_core,dvb_ttpci,dvb_bt8xx,dst_ca
bttv                  154000  2 dvb_bt8xx,bt878
btcx_risc               5896  1 bttv
video_buf              18948  2 saa7146_vv,bttv
v4l2_common             6784  2 saa7146_vv,bttv
v4l1_compat            14980  1 saa7146_vv
skge                   34832  0 
autofs4                17796  1 
af_packet              20616  2 
snd_mixer_oss          17536  0 
snd_intel8x0           29632  0 
snd_ac97_codec         76412  1 snd_intel8x0
snd_pcm                78084  2 snd_intel8x0,snd_ac97_codec
snd_timer              22532  1 snd_pcm
snd_page_alloc         10120  2 snd_intel8x0,snd_pcm
snd                    47972  5 snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore               9312  1 snd
agpgart                30416  2 nvidia,sis_agp
saa7115                14608  0 
tda9887                14352  0 
wm8775                  7004  0 
cx25840                40084  0 
tuner                  24352  0 
tveeprom               14380  1 bttv
ivtv                  206228  5 lirc_pvr150
i2c_algo_bit           10504  2 bttv,ivtv
videodev                9472  3 saa7146_vv,bttv,ivtv
sis900                 20352  0 
mii                     6400  1 sis900
i2c_sis96x              6788  0 
i2c_sis630              8716  0 
i2c_core               19200  37 lirc_pvr150,dvb_ttusb_budget,cx22700,budget_av,tda10021,budget_ci,budget,s5h1420,budget_core,dvb_ttpci,l64781,tda8083,stv0297,sp8870,ttpci_eeprom,mt312,tda1004x,ves1820,stv0299,ves1x93,dvb_bt8xx,nxt6000,mt352,sp887x,or51211,dst,cx24110,bttv,saa7115,tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit,i2c_sis96x,i2c_sis630
parport_pc             37444  0 
parport                32456  1 parport_pc
8250                   22660  1 8250_pnp
serial_core            20096  1 8250
pcmcia                 32808  0 
firmware_class          9728  14 lirc_pvr150,ttusb_dec,dvb_ttusb_budget,budget_av,budget_ci,dvb_ttpci,sp8870,tda1004x,dvb_bt8xx,sp887x,or51211,bttv,cx25840,pcmcia
yenta_socket           22924  0 
rsrc_nonstatic         12800  1 yenta_socket
pcmcia_core            36888  3 pcmcia,yenta_socket,rsrc_nonstatic
rtc                    12088  0 
ohci1394               32436  0 
ieee1394              299352  1 ohci1394
usb_storage            60608  0 
ohci_hcd               20484  0 
uhci_hcd               31760  0 
usbcore               103932  7 ehci_hcd,ttusb_dec,dvb_ttusb_budget,usb_storage,ohci_hcd,uhci_hcd
tmscsim                22976  0 
BusLogic               76564  0 

lspci -vv

Code:

0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        Memory behind bridge: cde00000-cfefffff
        Prefetchable memory behind bridge: adc00000-bdcfffff
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 0c00 [size=32]

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
        Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 128
        Region 4: I/O ports at ff00 [size=16]

0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
        Subsystem: C-Media Electronics Inc: Unknown device 0300
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (13000ns min, 2750ns max)
        Interrupt: pin C routed to IRQ 10
        Region 0: I/O ports at dc00 [size=256]
        Region 1: I/O ports at d800 [size=64]
        Capabilities: <available only to root>

0000:00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
        Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at d400 [size=256]
        Region 1: Memory at cffdd000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at cffa0000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:00:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 8003
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at c8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:0f.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Avermedia Technologies Inc: Unknown device a3cf
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 12
        Region 0: Memory at c4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:13.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 11
        Region 4: I/O ports at cc00 [size=32]
        Capabilities: <available only to root>

0000:00:13.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at d000 [size=32]
        Capabilities: <available only to root>

0000:00:13.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 0x10 (64 bytes)
        Interrupt: pin C routed to IRQ 10
        Region 0: Memory at cfffff00 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) (prog-if 00 [VGA])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 818a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at b0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at cfef0000 [disabled] [size=64K]
        Capabilities: <available only to root>

I will gladly post any other logs/command output. Can someone please push me in the right direction? I'll work through the problem but I need a little guidance to get things moving.

Top

Dinki

Post subject:

Posted: Fri Mar 10, 2006 9:13 am

Joined: Fri Dec 26, 2003 2:25 pm

Posts: 244

Here's something else:

sed -n '/= START INIT IVTV/,/= END INIT IVTV/p' </var/log/dmesg

Code:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.0 (tagged release) loading
ivtv:  Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
ivtv:  In case of problems please include the debug info
ivtv:  between the START INIT IVTV and END INIT IVTV lines when
ivtv:  mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based)
PCI: Found IRQ 10 for device 0000:00:0d.0
PCI: Sharing IRQ 10 with 0000:00:02.7
PCI: Sharing IRQ 10 with 0000:00:13.2
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26132, rev = F0B2, serial# = 9328876
tveeprom: tuner = <unknown> (idx = 112, type = 4)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25841 (type = 23)
tveeprom: decoder processor = CX25841 (type = 1c)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: Encoder revision: 0x02040011
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 4 (NoTuner) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 150, card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected AVerMedia M179 card (iTVC15 based)
PCI: Found IRQ 12 for device 0000:00:0f.0
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom.
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1
All bytes are equal. It is not a TEA5767
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60]
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21]
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
ivtv1: loading /lib/modules/ivtv-fw-enc.bin
ivtv1: loading /lib/modules/ivtv-fw-dec.bin
ivtv1: Encoder revision: 0x02040011
ivtv1: Decoder revision: 0x02020023
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #1
ivtv1: Initialized AVerMedia M179, card #1
ivtv:  ====================  END INIT IVTV  ====================

and what about this from mythbackend.log:

Code:

2006-03-10 09:18:41.239 Changing from None to WatchingLiveTV
2006-03-10 09:18:41.354 Can't enable VBI recording
vbi: Invalid argument
2006-03-10 09:18:56.476 Couldn't read data from the capture card in 15 seconds. Stopping.
2006-03-10 09:18:56.551 Changing from WatchingLiveTV to None

Top

Dinki

Post subject: rebuild /etc/mythtv/modules/ivtv

Posted: Fri Mar 10, 2006 2:45 pm

Joined: Fri Dec 26, 2003 2:25 pm

Posts: 244

Can someone tell me what should be in /etc/mythtv/modules/ivtv? Somehow mine disappeared and I need to regenerate it.

Top

tjc

Post subject:

Posted: Fri Mar 10, 2006 5:02 pm

Joined: Thu Mar 25, 2004 11:00 am

Posts: 9551

Location: Arlington, MA

Get it off of the CD. See this posting for how to do this: http://mysettopbox.tv/phpBB2/viewtopic. ... t=mnt+hda1

I should really put something about this up on the wiki...

Top

Dinki

Post subject:

Posted: Sat Mar 11, 2006 4:56 pm

Joined: Fri Dec 26, 2003 2:25 pm

Posts: 244

Thanks tjc. I had found it in a forum post, but it is good to know that you can grab things like that from the cd (makes sense too!).

I've managed to upgrade my IVTV to using the CompileIvtv on the wiki. All seems well with the 150, but adding the m179 still causes the black screen when switching to the m179 while watching live tv. Can someone take a look at my ivtv settings and let me know if they look reasonable or if there is something wrong?

IVTV from dmesg:

Code:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.3 (tagged release) loading
ivtv:  Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
tveeprom: ivtv version

ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840 1-0044: ivtv driver
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: ivtv driver
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032

ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 4 (NoTuner) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 150, card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected AVerMedia M179 card (cx23415 based)

ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60]
saa7115 2-0021: ivtv driver
saa7115 2-0021: saa7114 found @ 0x42 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=saa7114, addr=21]
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032

ivtv1: Decoder revision: 0x02020023
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c
driver #1
ivtv1: Initialized AVerMedia M179, card #1
ivtv:  ====================  END INIT IVTV  ====================
ivtv0: i2c attach to card #0 ok [client=Hauppauge PVR150 IR RX, addr=71]

ivtv-detect :

Code:

driver:   ivtv-0.4.3 (tagged release)
card:     WinTV PVR 150, bus info 0000:00:0b.0, ivtv card #0
hardware: cx25840 wm8775 tveeprom
         /dev/video0: MPG encoding (links: /dev/video)
           /dev/vbi0: VBI encoding (links: /dev/vbi)
        /dev/video24: PCM encoding
        /dev/video32: YUV encoding

driver:   ivtv-0.4.3 (tagged release)
card:     AVerMedia M179, bus info 0000:00:0f.0, ivtv card #1
hardware: saa7114
         /dev/video1: MPG encoding
           /dev/vbi1: VBI encoding
        /dev/video25: PCM encoding
        /dev/video33: YUV encoding

Let me know if I can provide any additional information. I've been beating my head on this for a while now and would like to get it working (obviously). Thanks!

Top

tjc

Post subject:

Posted: Sat Mar 11, 2006 6:44 pm

Joined: Thu Mar 25, 2004 11:00 am

Posts: 9551

Location: Arlington, MA

Head over to the ivtv wiki and do some research, I seem to remember seeing some notes about the M179 there, but don't remember the details...
http://ivtvdriver.org/index.php/Main_Page

Top

Dinki

Post subject:

Posted: Sat Mar 11, 2006 7:42 pm

Joined: Fri Dec 26, 2003 2:25 pm

Posts: 244

Thanks for the input. I checked that out and only got hits on the M179 as being a supported card. I also checked the mailing list previously and didn't really come up with much. I just checked the devel list and came up with a few mentions about the card and patches.

The real rub is that the card works fine in the box when it's the only capture card. Does something look out of sorts with the M179 IVTV lines I posted above?

Top

tjc

Post subject:

Posted: Sat Mar 11, 2006 10:09 pm

Joined: Thu Mar 25, 2004 11:00 am

Posts: 9551

Location: Arlington, MA

I seem to remember something about having to manually specify the type for the m179 cards, but first lets look at something else. Do you have the input connections set up correctly for both cards? With 0.4.3 the PVR-150 should be set to "Tuner" and should be associated with your guide feed, but you also need an association for the second card.

Top

Dinki

Post subject:

Posted: Sun Mar 12, 2006 6:34 pm

Joined: Fri Dec 26, 2003 2:25 pm

Posts: 244

Thanks for the help tjc. Fortunately, and I do mean fortunately, Ben on the ivtv-users list had a similar set up and the fix was quite easy:

From Ben's post on ivtv-users:

Quote:

I have a PVT150 and 2 M179 cards and had to manually set the correct
tuners in order to get both working properly.

On Debian (likely the same on knoppmyth since it's debian based) I
have created the file:
/etc/modprobe.d/ivtv

It contains:

# Options for ivtv module
options ivtv tuner=50,2,2

This tells ivtv that my PVR150 should use tuner 50 and my two
AverMedia cards should use tuner 2. Getting it to work for you should
be as simple as remove the last comma and 2 from the tuner line.

And indeed it was that easy. Hopefully this will be of benefit to someone in the future.

Top

tjc

Post subject:

Posted: Tue Mar 14, 2006 12:00 am

Joined: Thu Mar 25, 2004 11:00 am

Posts: 9551

Location: Arlington, MA

I've added this information to the wiki here: http://www.knoppmythwiki.org/index.php?page=TVCards

Top

Page 1 of 1

[ 11 posts ]

Board index KnoppMyth Hardware

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum