LinHES Forums :: View topic - [FIXED!] Can't get 2nd tuner to work(PVR 150 Avermedia M179)

mythtv@mythtv:~ $ lsmod
Module Size Used by
sg 30496 0
nvidia 3916572 12
ehci_hcd 31368 0
pci_hotplug 27716 0
sis_agp 8068 1
8250_pnp 10240 0
pcspkr 5344 0
lirc_pvr150 18360 1
lirc_dev 14852 1 lirc_pvr150
ipv6 240128 14
ttusb_dec 22028 0
ttusbdecfe 4992 1 ttusb_dec
dvb_ttusb_budget 30364 0
cx22700 7044 1 dvb_ttusb_budget
budget_av 14464 0
tda10021 7684 1 budget_av
budget_ci 12288 0
budget 10752 0
s5h1420 9860 1 budget
budget_core 8836 3 budget_av,budget_ci,budget
dvb_ttpci 88004 0
l64781 8452 2 budget,dvb_ttpci
tda8083 7044 3 dvb_ttusb_budget,budget,dvb_ttpci
stv0297 9216 1 dvb_ttpci
sp8870 8588 1 dvb_ttpci
ttpci_eeprom 4352 2 budget_core,dvb_ttpci
saa7146_vv 44672 2 budget_av,dvb_ttpci
saa7146 16520 6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
mt312 8964 0
tda1004x 14724 3 dvb_ttusb_budget,budget_av,budget_ci
ves1820 7172 3 dvb_ttusb_budget,budget,dvb_ttpci
stv0299 11912 5 dvb_ttusb_budget,budget_av,budget_ci,budget,dvb_ttpci
ves1x93 7940 2 budget,dvb_ttpci
evdev 9088 0
dvb_bt8xx 11780 0
nxt6000 8580 1 dvb_bt8xx
mt352 7812 1 dvb_bt8xx
sp887x 8836 1 dvb_bt8xx
dst_ca 14848 1 dvb_bt8xx
or51211 11140 1 dvb_bt8xx
dst 19332 2 dvb_bt8xx,dst_ca
bt878 10200 2 dvb_bt8xx,dst
cx24110 8836 1 dvb_bt8xx
dvb_core 75304 9 ttusb_dec,dvb_ttusb_budget,budget_av,budget_ci,budget,budget_core,dvb_ttpci,dvb_bt8xx,dst_ca
bttv 154000 2 dvb_bt8xx,bt878
btcx_risc 5896 1 bttv
video_buf 18948 2 saa7146_vv,bttv
v4l2_common 6784 2 saa7146_vv,bttv
v4l1_compat 14980 1 saa7146_vv
skge 34832 0
autofs4 17796 1
af_packet 20616 2
snd_mixer_oss 17536 0
snd_intel8x0 29632 0
snd_ac97_codec 76412 1 snd_intel8x0
snd_pcm 78084 2 snd_intel8x0,snd_ac97_codec
snd_timer 22532 1 snd_pcm
snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
snd 47972 5 snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 9312 1 snd
agpgart 30416 2 nvidia,sis_agp
saa7115 14608 0
tda9887 14352 0
wm8775 7004 0
cx25840 40084 0
tuner 24352 0
tveeprom 14380 1 bttv
ivtv 206228 5 lirc_pvr150
i2c_algo_bit 10504 2 bttv,ivtv
videodev 9472 3 saa7146_vv,bttv,ivtv
sis900 20352 0
mii 6400 1 sis900
i2c_sis96x 6788 0
i2c_sis630 8716 0
i2c_core 19200 37 lirc_pvr150,dvb_ttusb_budget,cx22700,budget_av,tda10021,budget_ci,budget,s5h1420,budget_core,dvb_ttpci,l64781,tda8083,stv0297,sp8870,ttpci_eeprom,mt312,tda1004x,ves1820,stv0299,ves1x93,dvb_bt8xx,nxt6000,mt352,sp887x,or51211,dst,cx24110,bttv,saa7115,tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit,i2c_sis96x,i2c_sis630
parport_pc 37444 0
parport 32456 1 parport_pc
8250 22660 1 8250_pnp
serial_core 20096 1 8250
pcmcia 32808 0
firmware_class 9728 14 lirc_pvr150,ttusb_dec,dvb_ttusb_budget,budget_av,budget_ci,dvb_ttpci,sp8870,tda1004x,dvb_bt8xx,sp887x,or51211,bttv,cx25840,pcmcia
yenta_socket 22924 0
rsrc_nonstatic 12800 1 yenta_socket
pcmcia_core 36888 3 pcmcia,yenta_socket,rsrc_nonstatic
rtc 12088 0
ohci1394 32436 0
ieee1394 299352 1 ohci1394
usb_storage 60608 0
ohci_hcd 20484 0
uhci_hcd 31760 0
usbcore 103932 7 ehci_hcd,ttusb_dec,dvb_ttusb_budget,usb_storage,ohci_hcd,uhci_hcd
tmscsim 22976 0
BusLogic 76564 0

0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: cde00000-cfefffff
Prefetchable memory behind bridge: adc00000-bdcfffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0c00 [size=32]

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 4: I/O ports at ff00 [size=16]

0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: C-Media Electronics Inc: Unknown device 0300
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=64]
Capabilities: <available only to root>

0000:00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at cffdd000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at cffa0000 [disabled] [size=128K]
Capabilities: <available only to root>

0000:00:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>

0000:00:0f.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Avermedia Technologies Inc: Unknown device a3cf
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at c4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>

0000:00:13.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at cc00 [size=32]
Capabilities: <available only to root>

0000:00:13.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at d000 [size=32]
Capabilities: <available only to root>

0000:00:13.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x10 (64 bytes)
Interrupt: pin C routed to IRQ 10
Region 0: Memory at cfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 818a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at cfef0000 [disabled] [size=64K]
Capabilities: <available only to root>

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.0 (tagged release) loading
ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based)
PCI: Found IRQ 10 for device 0000:00:0d.0
PCI: Sharing IRQ 10 with 0000:00:02.7
PCI: Sharing IRQ 10 with 0000:00:13.2
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26132, rev = F0B2, serial# = 9328876
tveeprom: tuner = <unknown> (idx = 112, type = 4)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25841 (type = 23)
tveeprom: decoder processor = CX25841 (type = 1c)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: Encoder revision: 0x02040011
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 4 (NoTuner) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected AVerMedia M179 card (iTVC15 based)
PCI: Found IRQ 12 for device 0000:00:0f.0
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom.
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1
All bytes are equal. It is not a TEA5767
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60]
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21]
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
ivtv1: loading /lib/modules/ivtv-fw-enc.bin
ivtv1: loading /lib/modules/ivtv-fw-dec.bin
ivtv1: Encoder revision: 0x02040011
ivtv1: Decoder revision: 0x02020023
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #1
ivtv1: Initialized AVerMedia M179, card #1
ivtv: ==================== END INIT IVTV ====================

2006-03-10 09:18:41.239 Changing from None to WatchingLiveTV
2006-03-10 09:18:41.354 Can't enable VBI recording
vbi: Invalid argument
2006-03-10 09:18:56.476 Couldn't read data from the capture card in 15 seconds. Stopping.
2006-03-10 09:18:56.551 Changing from WatchingLiveTV to None

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
tveeprom: ivtv version

ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840 1-0044: ivtv driver
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: ivtv driver
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032

ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 4 (NoTuner) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected AVerMedia M179 card (cx23415 based)

ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60]
saa7115 2-0021: ivtv driver
saa7115 2-0021: saa7114 found @ 0x42 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=saa7114, addr=21]
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032

ivtv1: Decoder revision: 0x02020023
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c
driver #1
ivtv1: Initialized AVerMedia M179, card #1
ivtv: ==================== END INIT IVTV ====================
ivtv0: i2c attach to card #0 ok [client=Hauppauge PVR150 IR RX, addr=71]

driver: ivtv-0.4.3 (tagged release)
card: WinTV PVR 150, bus info 0000:00:0b.0, ivtv card #0
hardware: cx25840 wm8775 tveeprom
/dev/video0: MPG encoding (links: /dev/video)
/dev/vbi0: VBI encoding (links: /dev/vbi)
/dev/video24: PCM encoding
/dev/video32: YUV encoding

driver: ivtv-0.4.3 (tagged release)
card: AVerMedia M179, bus info 0000:00:0f.0, ivtv card #1
hardware: saa7114
/dev/video1: MPG encoding
/dev/vbi1: VBI encoding
/dev/video25: PCM encoding
/dev/video33: YUV encoding

Author:	Dinki [ Thu Mar 09, 2006 10:13 pm ]
Post subject:	[FIXED!] Can't get 2nd tuner to work(PVR 150 Avermedia M179)
Today I finally upgraded from R4v(last one) to the current R5 release. I did an autoupgrade and after a bit of trouble with incompatible ivtv settings from the older install, I managed to get the Avermedia M179 to work fine. The next thing I did was add the PVR 150. The card was detected and I configured it as well as the M179 in mythtv-setup. When watching live tv, the M179 plays fine (/dev/video0), but the PVR 150 gave the dreaded black screen when watching live tv. I then pulled the M179 and used just the PVR 150. It worked flawlessly. I then try adding the M179 back into the system. I got the same results as before, but the PVR 150 (now /dev/video0) worked fine and now the M179 (/dev/video1) showed the black screen on watch live tv. Is there something I need to set in order to get these cards to 'play nice'? These are my first hardware encoder cards, so I am very green with the ivtv stuff. Any help/tips/leads is greatly appreciated.

Author:	Dinki [ Fri Mar 10, 2006 8:21 am ]
Post subject:
Perhaps I should have included more information: lsmod Code: mythtv@mythtv:~ $ lsmod Module Size Used by sg 30496 0 nvidia 3916572 12 ehci_hcd 31368 0 pci_hotplug 27716 0 sis_agp 8068 1 8250_pnp 10240 0 pcspkr 5344 0 lirc_pvr150 18360 1 lirc_dev 14852 1 lirc_pvr150 ipv6 240128 14 ttusb_dec 22028 0 ttusbdecfe 4992 1 ttusb_dec dvb_ttusb_budget 30364 0 cx22700 7044 1 dvb_ttusb_budget budget_av 14464 0 tda10021 7684 1 budget_av budget_ci 12288 0 budget 10752 0 s5h1420 9860 1 budget budget_core 8836 3 budget_av,budget_ci,budget dvb_ttpci 88004 0 l64781 8452 2 budget,dvb_ttpci tda8083 7044 3 dvb_ttusb_budget,budget,dvb_ttpci stv0297 9216 1 dvb_ttpci sp8870 8588 1 dvb_ttpci ttpci_eeprom 4352 2 budget_core,dvb_ttpci saa7146_vv 44672 2 budget_av,dvb_ttpci saa7146 16520 6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv mt312 8964 0 tda1004x 14724 3 dvb_ttusb_budget,budget_av,budget_ci ves1820 7172 3 dvb_ttusb_budget,budget,dvb_ttpci stv0299 11912 5 dvb_ttusb_budget,budget_av,budget_ci,budget,dvb_ttpci ves1x93 7940 2 budget,dvb_ttpci evdev 9088 0 dvb_bt8xx 11780 0 nxt6000 8580 1 dvb_bt8xx mt352 7812 1 dvb_bt8xx sp887x 8836 1 dvb_bt8xx dst_ca 14848 1 dvb_bt8xx or51211 11140 1 dvb_bt8xx dst 19332 2 dvb_bt8xx,dst_ca bt878 10200 2 dvb_bt8xx,dst cx24110 8836 1 dvb_bt8xx dvb_core 75304 9 ttusb_dec,dvb_ttusb_budget,budget_av,budget_ci,budget,budget_core,dvb_ttpci,dvb_bt8xx,dst_ca bttv 154000 2 dvb_bt8xx,bt878 btcx_risc 5896 1 bttv video_buf 18948 2 saa7146_vv,bttv v4l2_common 6784 2 saa7146_vv,bttv v4l1_compat 14980 1 saa7146_vv skge 34832 0 autofs4 17796 1 af_packet 20616 2 snd_mixer_oss 17536 0 snd_intel8x0 29632 0 snd_ac97_codec 76412 1 snd_intel8x0 snd_pcm 78084 2 snd_intel8x0,snd_ac97_codec snd_timer 22532 1 snd_pcm snd_page_alloc 10120 2 snd_intel8x0,snd_pcm snd 47972 5 snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 9312 1 snd agpgart 30416 2 nvidia,sis_agp saa7115 14608 0 tda9887 14352 0 wm8775 7004 0 cx25840 40084 0 tuner 24352 0 tveeprom 14380 1 bttv ivtv 206228 5 lirc_pvr150 i2c_algo_bit 10504 2 bttv,ivtv videodev 9472 3 saa7146_vv,bttv,ivtv sis900 20352 0 mii 6400 1 sis900 i2c_sis96x 6788 0 i2c_sis630 8716 0 i2c_core 19200 37 lirc_pvr150,dvb_ttusb_budget,cx22700,budget_av,tda10021,budget_ci,budget,s5h1420,budget_core,dvb_ttpci,l64781,tda8083,stv0297,sp8870,ttpci_eeprom,mt312,tda1004x,ves1820,stv0299,ves1x93,dvb_bt8xx,nxt6000,mt352,sp887x,or51211,dst,cx24110,bttv,saa7115,tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit,i2c_sis96x,i2c_sis630 parport_pc 37444 0 parport 32456 1 parport_pc 8250 22660 1 8250_pnp serial_core 20096 1 8250 pcmcia 32808 0 firmware_class 9728 14 lirc_pvr150,ttusb_dec,dvb_ttusb_budget,budget_av,budget_ci,dvb_ttpci,sp8870,tda1004x,dvb_bt8xx,sp887x,or51211,bttv,cx25840,pcmcia yenta_socket 22924 0 rsrc_nonstatic 12800 1 yenta_socket pcmcia_core 36888 3 pcmcia,yenta_socket,rsrc_nonstatic rtc 12088 0 ohci1394 32436 0 ieee1394 299352 1 ohci1394 usb_storage 60608 0 ohci_hcd 20484 0 uhci_hcd 31760 0 usbcore 103932 7 ehci_hcd,ttusb_dec,dvb_ttusb_budget,usb_storage,ohci_hcd,uhci_hcd tmscsim 22976 0 BusLogic 76564 0 lspci -vv Code: 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: <available only to root> 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: cde00000-cfefffff Prefetchable memory behind bridge: adc00000-bdcfffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 0c00 [size=32] 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master]) Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Region 4: I/O ports at ff00 [size=16] 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) Subsystem: C-Media Electronics Inc: Unknown device 0300 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at dc00 [size=256] Region 1: I/O ports at d800 [size=64] Capabilities: <available only to root> 0000:00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90) Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d400 [size=256] Region 1: Memory at cffdd000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at cffa0000 [disabled] [size=128K] Capabilities: <available only to root> 0000:00:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc.: Unknown device 8003 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 10 Region 0: Memory at c8000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root> 0000:00:0f.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Avermedia Technologies Inc: Unknown device a3cf Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 12 Region 0: Memory at c4000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root> 0000:00:13.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at cc00 [size=32] Capabilities: <available only to root> 0000:00:13.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at d000 [size=32] Capabilities: <available only to root> 0000:00:13.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x10 (64 bytes) Interrupt: pin C routed to IRQ 10 Region 0: Memory at cfffff00 (32-bit, non-prefetchable) [size=256] Capabilities: <available only to root> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 818a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at b0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at cfef0000 [disabled] [size=64K] Capabilities: <available only to root> I will gladly post any other logs/command output. Can someone please push me in the right direction? I'll work through the problem but I need a little guidance to get things moving.

Author:	Dinki [ Fri Mar 10, 2006 9:13 am ]
Post subject:
Here's something else: sed -n '/= START INIT IVTV/,/= END INIT IVTV/p' </var/log/dmesg Code: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) PCI: Found IRQ 10 for device 0000:00:0d.0 PCI: Sharing IRQ 10 with 0000:00:02.7 PCI: Sharing IRQ 10 with 0000:00:13.2 tveeprom: ivtv version tveeprom: Hauppauge: model = 26132, rev = F0B2, serial# = 9328876 tveeprom: tuner = <unknown> (idx = 112, type = 4) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25841 (type = 23) tveeprom: decoder processor = CX25841 (type = 1c) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed. atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed. cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed. ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02040011 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 4 (NoTuner) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected AVerMedia M179 card (iTVC15 based) PCI: Found IRQ 12 for device 0000:00:0f.0 atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed. tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom. ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1 All bytes are equal. It is not a TEA5767 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60] saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21] atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed. ivtv1: loading /lib/modules/ivtv-fw-enc.bin ivtv1: loading /lib/modules/ivtv-fw-dec.bin ivtv1: Encoder revision: 0x02040011 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #1 ivtv1: Initialized AVerMedia M179, card #1 ivtv: ==================== END INIT IVTV ==================== and what about this from mythbackend.log: Code: 2006-03-10 09:18:41.239 Changing from None to WatchingLiveTV 2006-03-10 09:18:41.354 Can't enable VBI recording vbi: Invalid argument 2006-03-10 09:18:56.476 Couldn't read data from the capture card in 15 seconds. Stopping. 2006-03-10 09:18:56.551 Changing from WatchingLiveTV to None

Author:	Dinki [ Fri Mar 10, 2006 2:45 pm ]
Post subject:	rebuild /etc/mythtv/modules/ivtv
Can someone tell me what should be in /etc/mythtv/modules/ivtv? Somehow mine disappeared and I need to regenerate it.

Author:	tjc [ Fri Mar 10, 2006 5:02 pm ]
Post subject:
Get it off of the CD. See this posting for how to do this: http://mysettopbox.tv/phpBB2/viewtopic. ... t=mnt+hda1 I should really put something about this up on the wiki...

LinHES Forums http://forum.linhes.org/

[FIXED!] Can't get 2nd tuner to work(PVR 150 Avermedia M179) http://forum.linhes.org/viewtopic.php?f=2&t=8902	Page 1 of 1

Author:	Dinki [ Sat Mar 11, 2006 4:56 pm ]
Post subject:
Thanks tjc. I had found it in a forum post, but it is good to know that you can grab things like that from the cd (makes sense too!). I've managed to upgrade my IVTV to using the CompileIvtv on the wiki. All seems well with the 150, but adding the m179 still causes the black screen when switching to the m179 while watching live tv. Can someone take a look at my ivtv settings and let me know if they look reasonable or if there is something wrong? IVTV from dmesg: Code: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.3 (tagged release) loading ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) tveeprom: ivtv version ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 1-0044: ivtv driver cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 1-001b: ivtv driver wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 4 (NoTuner) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected AVerMedia M179 card (cx23415 based) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60] saa7115 2-0021: ivtv driver saa7115 2-0021: saa7114 found @ 0x42 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=saa7114, addr=21] ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #1 ivtv1: Initialized AVerMedia M179, card #1 ivtv: ==================== END INIT IVTV ==================== ivtv0: i2c attach to card #0 ok [client=Hauppauge PVR150 IR RX, addr=71] ivtv-detect : Code: driver: ivtv-0.4.3 (tagged release) card: WinTV PVR 150, bus info 0000:00:0b.0, ivtv card #0 hardware: cx25840 wm8775 tveeprom /dev/video0: MPG encoding (links: /dev/video) /dev/vbi0: VBI encoding (links: /dev/vbi) /dev/video24: PCM encoding /dev/video32: YUV encoding driver: ivtv-0.4.3 (tagged release) card: AVerMedia M179, bus info 0000:00:0f.0, ivtv card #1 hardware: saa7114 /dev/video1: MPG encoding /dev/vbi1: VBI encoding /dev/video25: PCM encoding /dev/video33: YUV encoding Let me know if I can provide any additional information. I've been beating my head on this for a while now and would like to get it working (obviously). Thanks!

Author:	tjc [ Sat Mar 11, 2006 6:44 pm ]
Post subject:
Head over to the ivtv wiki and do some research, I seem to remember seeing some notes about the M179 there, but don't remember the details... http://ivtvdriver.org/index.php/Main_Page

Author:	Dinki [ Sat Mar 11, 2006 7:42 pm ]
Post subject:
Thanks for the input. I checked that out and only got hits on the M179 as being a supported card. I also checked the mailing list previously and didn't really come up with much. I just checked the devel list and came up with a few mentions about the card and patches. The real rub is that the card works fine in the box when it's the only capture card. Does something look out of sorts with the M179 IVTV lines I posted above?

Author:	tjc [ Sat Mar 11, 2006 10:09 pm ]
Post subject:
I seem to remember something about having to manually specify the type for the m179 cards, but first lets look at something else. Do you have the input connections set up correctly for both cards? With 0.4.3 the PVR-150 should be set to "Tuner" and should be associated with your guide feed, but you also need an association for the second card.

Author:	Dinki [ Sun Mar 12, 2006 6:34 pm ]
Post subject:
Thanks for the help tjc. Fortunately, and I do mean fortunately, Ben on the ivtv-users list had a similar set up and the fix was quite easy: From Ben's post on ivtv-users: Quote: I have a PVT150 and 2 M179 cards and had to manually set the correct tuners in order to get both working properly. On Debian (likely the same on knoppmyth since it's debian based) I have created the file: /etc/modprobe.d/ivtv It contains: # Options for ivtv module options ivtv tuner=50,2,2 This tells ivtv that my PVR150 should use tuner 50 and my two AverMedia cards should use tuner 2. Getting it to work for you should be as simple as remove the last comma and 2 from the tuner line. And indeed it was that easy. Hopefully this will be of benefit to someone in the future.

Author:	tjc [ Tue Mar 14, 2006 12:00 am ]
Post subject:
I've added this information to the wiki here: http://www.knoppmythwiki.org/index.php?page=TVCards

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/