This problem is baffling me. I am using R5B7 with svideo into a PVR-350. Video out is svideo from a NVidia FX5200.

Is there _any_ difference in the encoding/decoding process between a recording and livetv? I thought that they go through exactly the same process: 1. pvr350 encodes svideo, 2. file is stored to disk, 3. file is decoded for viewing on the FX5200. The only difference I am aware of is the delay in time.

So why do all my recordings show up B&W monochrome, but livetv is in color?

thanks in advance,
Dirk

Curious. What about playback of livetv recordings (ie the recordings that are kept of the live tv you watch)? Is this a new install or an upgrade?

_________________
HP VL400 (PIII 866), Skystar2 2.6D, PVR350, Nvidia FX5200, 384MB, 200GB, KnoppMyth R5.5

Recording profiles? "Live TV" versus "Default" is one difference...

Hi,
As a suggestion, check your mythtv-setup for the input to be svideo0 instead of composite0. If you still have the adapter svhs <> rca then switch to composite and try that also.

Curious, how do you switch to the external video connector?

Mike

Thanks for the suggestions, guys.

Turns out I had two inputs set up in mythtv-setup - one svideo0 and one composite0 (I tried out composite0 a while ago and decided not to use it).

Running mythtv-setup, deleting all inputs, and setting up svideo0 did the
trick.

Apparently composite0 was giving me b&w.

For reasons I don't understand, watching livetv was always color, presumably from svideo0, and scheduled recordings were b&w (from composite0).

Occasionally (usually as I was troubleshooting ) recordings would be in color (often somewhat faded). I'm guessing that was due to flaky behavior of composite0 rather than random use of svideo0?

Anyway, thanks again!
Dirk