| LinHES Forums http://forum.linhes.org/ |
|
| Firewire errors during recording http://forum.linhes.org/viewtopic.php?f=21&t=21976 |
Page 1 of 1 |
| Author: | Big boy stan [ Thu Jan 13, 2011 7:47 am ] |
| Post subject: | Firewire errors during recording |
I just setup my first firewire card ( a cheap SYBA firewire card from newegg) and connected it to a Verizon Fios STB (labeled QIP7100 although plugreport lists it as a 8100). I have run the firewire utilities and everything checks out. I can change channels without problem using the 6200ch channel changer. This week I set out to make HD recordings from the box and although it (almost) never fails to make a recording, they are all full of glitches and jumps. I am using the mythtv internal channel changer for the firewire recordings. In looking at my mythbackend log I find: Code: 2011-01-11 06:00:02.857 ProgramInfo(4576_20110111060000.mpg), Error: GetPlaybackURL: '4576_20110111060000.mpg' should be local, but it can not be found. 2011-01-11 06:00:02.903 ProgramInfo(4576_20110111060000.mpg), Error: GetPlaybackURL: '4576_20110111060000.mpg' should be local, but it can not be found. 2011-01-11 06:00:06.873 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 50 msec... 2011-01-11 06:00:06.926 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 100 msec... 2011-01-11 06:00:06.977 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 150 msec... 2011-01-11 06:00:07.028 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 200 msec... *** this repeats up to 1050msec *** 2011-01-11 06:00:07.891 LFireDev(0024A1FFFE3AA6F1): ResetBus() -- begin 2011-01-11 06:00:07.894 LFireDev(0024A1FFFE3AA6F1): ResetBus() -- end 2011-01-11 06:00:07.894 LFireDev(0024A1FFFE3AA6F1): SignalReset(7->8) 2011-01-11 06:00:07.895 LFireDev(0024A1FFFE3AA6F1): SignalReset(7->8): Updating device list -- begin 2011-01-11 06:00:08.638 LFireDev(0024A1FFFE3AA6F1): SignalReset(7->8): Updating device list -- end 2011-01-11 06:00:08.688 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 50 msec... 2011-01-11 06:00:08.739 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 100 msec... 2011-01-11 06:00:08.740 LFireDev(0024A1FFFE3AA6F1): HandleBusReset: Reconnecting P2P connection 2011-01-11 06:00:08.743 LFireDev(0024A1FFFE3AA6F1): HandleBusReset: Reconnected fwchan: 0 output: 0xffc0 input: 0xffc1 2011-01-11 06:00:09.015 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 150 msec... 2011-01-11 06:00:09.066 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 200 msec... 2011-01-11 06:00:09.117 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 250 msec... 2011-01-11 06:00:09.167 LFireDev(0024A1FFFE3AA6F1), Warning: No Input in 300 msec... Eventually after about 3 bus resets the recording starts but with plenty of errors Code: 2011-01-11 06:00:12.941 LFireDev(0024A1FFFE3AA6F1): HandleBusReset: Reconnecting P2P connection
2011-01-11 06:00:12.947 LFireDev(0024A1FFFE3AA6F1): HandleBusReset: Reconnected fwchan: 0 output: 0xffc0 input: 0xffc1 2011-01-11 06:00:13.183 MythContext: Connecting to backend server: 192.168.1.21:6543 (try 1 of 1) 2011-01-11 06:00:13.189 Using protocol version 23056 2011-01-11 06:00:13.189 MainServer::ANN Playback 2011-01-11 06:00:13.190 adding: Envy as a client (events: 0) 2011-01-11 06:00:13.195 MainServer::ANN Monitor 2011-01-11 06:00:13.198 adding: Envy as a client (events: 1) 2011-01-11 06:00:13.232 ProgramInfo(): Updated pathname '':'' -> '4576_20110111060000.mpg' 2011-01-11 06:00:31.302 AFD: Opened codec 0x8ce7910, id(MPEG2VIDEO) type(Video) 2011-01-11 06:00:31.305 AFD: codec AC3 has 6 channels 2011-01-11 06:00:31.305 AFD: Opened codec 0x8ce8060, id(AC3) type(Audio) 2011-01-11 06:00:31.307 MythContext: Connecting to backend server: 192.168.1.21:6543 (try 1 of 1) 2011-01-11 06:00:31.308 Using protocol version 23056 2011-01-11 06:00:31.312 MainServer::ANN Playback 2011-01-11 06:00:31.314 adding: Envy as a client (events: 0) 2011-01-11 06:00:31.318 RecBase(4:/dev/video): GetKeyframePositions(325,9223372036854775807,#18) out of 46 2011-01-11 06:01:01.290 MainServer::ANN Monitor 2011-01-11 06:01:01.295 adding: Envy as a client (events: 0) 2011-01-11 06:08:33.639 RecBase(4:/dev/video): GetKeyframePositions(541,9223372036854775807,#1205) out of 1251 2011-01-11 06:08:35.577 [mpeg2video @ 0xb6e61840]invalid mb type in I Frame at 117 34 2011-01-11 06:08:35.583 [mpeg2video @ 0xb6e61840]ac-tex damaged at 59 40 2011-01-11 06:08:35.584 [mpeg2video @ 0xb6e61840]invalid mb type in I Frame at 84 41 2011-01-11 06:08:35.585 [mpeg2video @ 0xb6e61840]ac-tex damaged at 56 45 2011-01-11 06:08:35.586 [mpeg2video @ 0xb6e61840]invalid mb type in I Frame at 56 48 2011-01-11 06:08:35.591 [mpeg2video @ 0xb6e61840]Warning MVs not available 2011-01-11 06:08:38.110 [mpeg2video @ 0xb6e61840]00 motion_type at 96 45 2011-01-11 06:08:38.111 [mpeg2video @ 0xb6e61840]ac-tex damaged at 37 49 2011-01-11 06:08:38.117 [mpeg2video @ 0xb6e61840]Warning MVs not available The mpeg2video errors then continue throughout the recording. I have tried different channels and programs but all have the errors. I have also tried changing the firewire setting in myth setup. Any and all help would be greatly appreciated. |
|
| Author: | marc.aronson [ Thu Jan 13, 2011 11:04 pm ] |
| Post subject: | |
I had some similar with my Motorola DCT-6200 box with Comcast. I eventually solved it by writing a custom channel tuning script that resets the box with "firewire_tester". I don't know if this will work for your situation -- is your tuner a Motorola DCT-6200? |
|
| Author: | Big boy stan [ Fri Jan 14, 2011 9:08 am ] |
| Post subject: | |
No. As I wrote above it is a qip7100 but plugreport says its a 8100. I see that there is some improvement with FireWire in the new kernel. I am hoping V7 may solve the problem. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|