LinHES Forums http://forum.linhes.org/ |
|
General troubles http://forum.linhes.org/viewtopic.php?f=21&t=24151 |
Page 2 of 3 |
Author: | Big boy stan [ Tue Mar 10, 2015 12:38 pm ] |
Post subject: | Re: General troubles |
The audio thing makes sense. Not sure why the rescan didn't work or why it picked an invalid device when valid ones were available. I completed the remote menu with the grey hauppauge remote and returned to the main menu then went back to the remote menu and selected the silver hauppauge with blaster. Returned to the main menu and still no remote. Then went to an X console and did a "nano ~/.mythtv/lircrc" and found an empty file. Then did a "nano /etc/lircrc" and found an empty file. Finally copied the backed up lircrc (from days of old) to /etc and after a reboot all was good. I will check the systemconfig log and the lircrc file when I get home tonight. |
Author: | Big boy stan [ Tue Mar 10, 2015 5:03 pm ] |
Post subject: | Re: General troubles |
I double checked the sym link and it is in place at ~/.mythtv/lircrc Here is the result of the logs Code: [mythtv@envy ~]$ cat /etc/systemconfig | grep Remote RemoteBackup="0" RemoteBackupDir="dir:/localdir" Remotetype="hauppauge-blaster" Remotebucket="hauppauge" Code: [mythtv@envy ~]$ cat /tmp/systemconfig_debug.log 03-09 20:59 - root - INFO - ____Start of IR____ 03-09 20:59 - root - DEBUG - pvr150 blaster selected, setting remote to hauppauge-blaster 03-09 20:59 - root - DEBUG - Setup of remote type hauppauge-blaster 03-09 20:59 - root - DEBUG - mv /etc/lircd.conf /etc/lircd.conf-Mar-09-2015-20:59:08 03-09 20:59 - root - DEBUG - (0, '') 03-09 20:59 - root - DEBUG - mv /etc/lircrc /etc/lircrc-Mar-09-2015-20:59:08 03-09 20:59 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/lircrc\xe2\x80\x99: No such file or directory') 03-09 20:59 - root - DEBUG - mv /etc/wol-lircrc /etc/wol-lircrc-Mar-09-2015-20:59:08 03-09 20:59 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/wol-lircrc\xe2\x80\x99: No such file or directory') 03-09 20:59 - root - DEBUG - mv /etc/remote.run /etc/remote.run-Mar-09-2015-20:59:08 03-09 20:59 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/remote.run\xe2\x80\x99: No such file or directory') 03-09 20:59 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircd* My lircrc is: Code: # ~/.mythtv/lircrc
# # MythTV native LIRC config file for # the Hauppauge PVR 150 silver remote # # Modified from Jarod Wilson's which came from Jeff Campbell's # and Brad Templeton's # Modified still further by Robert Jones # Here we have the jump point commands. They only work if you have # defined function keys for these jump points. For me the most # common command is the menu of recordings, so I put that on "videos" # even though that's counter-intuitive begin prog = mythtv button = TV repeat = 3 config = F5 end begin prog = mythtv button = VIDEOS repeat = 3 config = F2 end # Not yet defined Toggle PIP focus begin prog = mythtv button = MUSIC repeat = 3 config = B end # Given another function for now, I don't use mythgallery ** now is PIP Start begin prog = mythtv button = PICTURES repeat = 3 config = V end begin prog = mythtv button = GUIDE repeat = 3 config = M end # I stuck the "todo" list on here as Myth has no radio function ** SWAP PIP SCREENS ** begin prog = mythtv button = RADIO repeat = 3 config = N end begin prog = mythtv button = UP repeat = 3 config = Up end begin prog = mythtv button = DOWN repeat = 3 config = Down end begin prog = mythtv button = LEFT repeat = 3 config = Left end begin prog = mythtv button = RIGHT repeat = 3 config = Right end # Channel Up begin prog = mythtv button = CH+ repeat = 3 config = Up end # Channel Down begin prog = mythtv button = CH- repeat = 3 config = Down end # OK/Select begin prog = mythtv button = OK config = Space end # Play begin prog = mythtv button = PLAY config = Return end # Stop begin prog = mythtv button = STOP config = I end # Escape/Exit/Back begin prog = mythtv button = BACK/EXIT config = Esc end # Power Off/Exit begin prog = mythtv button = POWER config = Esc end # Pause begin prog = mythtv button = Pause repeat = 3 config = P end # Mute begin prog = mythtv button = MUTE repeat = 3 config = | end # Fast forward (30 sec default) begin prog = mythtv button = REW repeat = 3 config = < end # Rewind (10 sec default) begin prog = mythtv button = FFW repeat = 3 config = > end # Skip forward (10 min default) begin prog = mythtv button = SKIP repeat = 3 config = End end # Skip backward (10 min default) begin prog = mythtv button = REPLAY repeat = 3 config = Home end # Record begin prog = mythtv button = RECORD repeat = 3 config = R end # Delete begin prog = mythtv button = RED repeat = 3 config = D end # Decrease play speed begin prog = mythtv button = GREEN repeat = 3 config = J end # Display EPG while in live TV, # View selected show while in EPG begin prog = mythtv button = MENU repeat = 3 config = M end # Scroll up begin prog = mythtv button = VOL+ repeat = 3 config = F11 end # Scroll down begin prog = mythtv button = VOL- repeat = 3 config = F10 end # Bring up OSD info begin prog = irexec button = GO config = restartmyth.sh & end # Change display aspect ratio begin prog = mythtv button = PREVCH repeat = 3 config = W end # double speed watch begin prog = mythtv button = YELLOW repeat = 3 config = J end # change tuners begin prog = mythtv button = # repeat = 3 config = Y end # Bring up Time stretch begin prog = mythtv button = BLUE repeat = 3 config = A end # Numbers 0-9 begin prog = mythtv button = 0 repeat = 3 config = 0 end begin prog = mythtv button = 1 repeat = 3 config = 1 end begin prog = mythtv button = 2 repeat = 3 config = 2 end begin prog = mythtv button = 3 repeat = 3 config = 3 end begin prog = mythtv button = 4 repeat = 3 config = 4 end begin prog = mythtv button = 5 repeat = 3 config = 5 end begin prog = mythtv button = 6 repeat = 3 config = 6 end begin prog = mythtv button = 7 repeat = 3 config = 7 end begin prog = mythtv button = 8 repeat = 3 config = 8 end begin prog = mythtv button = 9 repeat = 3 config = 9 end ### MPlayer lirc setup # Show OSD begin prog = mplayer button = MENU repeat = 3 config = osd end # Pause playback begin prog = mplayer button = PAUSE repeat = 3 config = pause end # Skip ahead a minute if playing # If paused, resume playing begin prog = mplayer button = PLAY repeat = 3 config = seek +1 end # Stop playback and exit begin prog = mplayer button = STOP repeat = 3 config = quit end # Mute begin prog = mplayer button = MUTE repeat = 3 config = mute end # Seek back 10 seconds begin prog = mplayer button = LEFT repeat = 3 config = seek -10 end # Seek forward 30 seconds begin prog = mplayer button = RIGHT repeat = 3 config = seek +30 end # Quit begin prog = mplayer button = BACK/EXIT repeat = 3 config = quit end # Seek forward 10 minutes begin prog = mplayer button = UP repeat = 3 config = seek +600 end # Seek backward 10 minutes begin prog = mplayer button = DOWN repeat = 3 config = seek -600 end # Toggle full-screen begin prog = mplayer button = GUIDE repeat = 3 config = vo_fullscreen end ### Xine lirc setup begin prog = xine button = PLAY repeat = 3 config = Play end begin prog = xine button = STOP repeat = 3 config = Stop end begin prog = xine button = OFF repeat = 3 config = Quit end begin prog = xine button = PAUSE repeat = 3 config = Pause end begin prog = xine button = CH+ repeat = 3 config = EventUp end begin prog = xine button = CH- repeat = 3 config = EventDown end begin prog = xine button = VOL- repeat = 3 config = EventLeft end begin prog = xine button = VOL+ repeat = 3 config = EventRight end begin prog = xine button = OK repeat = 3 config = EventSelect end begin prog = xine button = BACK/EXIT repeat = 3 config = Menu end begin prog = xine button = FFW repeat = 3 #config = SpeedFaster config = SeekRelative+60 end begin prog = xine button = REW repeat = 3 #config = SpeedSlower config = SeekRelative-60 end begin prog = xine button = FULL repeat = 3 config = Volume+ end begin prog = xine button = BLANK repeat = 3 config = Volume- end begin prog = xine button = MUTE repeat = 3 config = Mute end begin prog = xine button = MENU repeat = 3 config = RootMenu end begin prog = xine button = SKIP repeat = 3 config = EventNext end begin prog = xine button = REPLAY repeat = 3 config = EventPrior end begin prog = xine button = GO repeat = 3 config = OSDStreamInfos end begin prog = xine button = RED repeat = 3 config = Quit end begin prog = xine button = RED repeat = 3 config = Quit end ###ebox begin prog = eboxy button = up repeat = 4 config = UP end begin prog = eboxy button = down repeat = 4 config = DOWN end begin prog = eboxy button = OK repeat = 4 config = accept end begin prog = eboxy button = ffwd repeat = 4 config = FFW end begin prog = eboxy button = rew repeat = 4 config = REW end begin prog = eboxy button = exit repeat = 0 config = quit end begin prog = eboxy button = chup repeat = 4 config = CH+ end begin prog = eboxy button = chdown repeat = 4 config = CH- end |
Author: | brfransen [ Tue Mar 10, 2015 5:16 pm ] |
Post subject: | Re: General troubles |
Is that the whole systemconfig_debug.log? It is missing alot if that is it. And there are some odd chars there too. Your /etc/lircrc should have only this in it: Code: include "/usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircrc-haupgrey-g3.txt" Try running Code: sudo systemconfig.py -m ir and then repost the systemconfig_debug.log
|
Author: | Big boy stan [ Wed Mar 11, 2015 8:55 am ] |
Post subject: | Re: General troubles |
I will give that a try and let you know what I see. I modified the lircrc many years ago. My recollection is that the standard linhes (knoppmyth) one didnt function with the PVR150 blaster. If the include statement doesn't work, I will take a look to see what the differences are between the two files. |
Author: | Big boy stan [ Wed Mar 11, 2015 7:28 pm ] |
Post subject: | Re: General troubles |
Here is the result of that command: Code: [mythtv@envy lirc]$ sudo systemconfig.py -m ir
*TEMPLATES is not defined *using default value ____Start of IR____ Traceback (most recent call last): File "/usr/MythVantage/bin/systemconfig.py", line 462, in <module> main(sys.argv[1:]) File "/usr/MythVantage/bin/systemconfig.py", line 313, in main restart = mv_ir.setup_ir(systemconfig,data_config,cmdmodule["this_is_install"]) File "/usr/MythVantage/bin/mv_ir.py", line 445, in setup_ir systemconfig.get("Remotebucket")) File "/usr/MythVantage/bin/mv_ir.py", line 130, in setup_ir_remote os.symlink(filename,"/etc/lircd.conf") OSError: [Errno 17] File exists |
Author: | brfransen [ Thu Mar 12, 2015 6:42 am ] |
Post subject: | Re: General troubles |
It is suppose to move /etc/lircd.conf before it symlinks it but it isn't happening. Can you post the systemconfig_debug.log? |
Author: | Big boy stan [ Sat Mar 14, 2015 7:10 am ] |
Post subject: | Re: General troubles |
Here is the contents of systemconfig_debug.log Code: 03-11 21:33 - root - DEBUG - ______START OF DEBUG______
03-11 21:33 - root - DEBUG - Using 1 as dhcp value for eth0 03-11 21:33 - root - DEBUG - Using 192.168.1.21 as default ip 03-11 21:33 - root - DEBUG - Using 1 as dhcp value for eth0 03-11 21:33 - root - DEBUG - Using 1 as dhcp value for eth0 03-11 21:33 - root - DEBUG - Using 1 as dhcp value for eth0 03-11 21:33 - root - INFO - ____Start of IR____ 03-11 21:33 - root - DEBUG - pvr150 blaster selected, setting remote to hauppauge-blaster 03-11 21:33 - root - DEBUG - Setup of remote type hauppauge-blaster 03-11 21:33 - root - DEBUG - mv /etc/lircd.conf /etc/lircd.conf-Mar-11-2015-21:33:15 03-11 21:33 - root - DEBUG - (0, '') 03-11 21:33 - root - DEBUG - mv /etc/lircrc /etc/lircrc-Mar-11-2015-21:33:15 03-11 21:33 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/lircrc\xe2\x80\x99: No such file or directory') 03-11 21:33 - root - DEBUG - mv /etc/wol-lircrc /etc/wol-lircrc-Mar-11-2015-21:33:15 03-11 21:33 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/wol-lircrc\xe2\x80\x99: No such file or directory') 03-11 21:33 - root - DEBUG - mv /etc/remote.run /etc/remote.run-Mar-11-2015-21:33:15 03-11 21:33 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/remote.run\xe2\x80\x99: No such file or directory') 03-11 21:33 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircd* |
Author: | brfransen [ Sat Mar 14, 2015 12:24 pm ] |
Post subject: | Re: General troubles |
There should be way more in that log. And the \xe2\x80\x98 seem like maybe something in your environment is not right. What is in your /etc/locale.conf? Maybe try reinstalling LinHES-config. |
Author: | Big boy stan [ Sat Mar 14, 2015 2:18 pm ] |
Post subject: | Re: General troubles |
Not much in locale.conf. Were you expecting more? How do I reinstall linhes-config? Code: [mythtv@envy ~]$ cat /etc/locale.conf
LANG="en_US.UTF-8" [mythtv@envy ~]$ |
Author: | brfransen [ Sun Mar 15, 2015 6:41 am ] |
Post subject: | Re: General troubles |
locale.conf looks right. Code: sudo pacman -S LinHES-config case matters.
|
Author: | Big boy stan [ Sun Mar 15, 2015 3:04 pm ] |
Post subject: | Re: General troubles |
Did the pacman command and it confirmed I had the updated version but I had it re-install. It went through without a problem. I then went and selected the black remote, exited the menu, then selected the blaster remote and exited the menu. After a reboot, once again the remote does not work and the systemconfig_debug.log looks the same Code: 03-15 16:39 - root - DEBUG - ______START OF DEBUG______ 03-15 16:39 - root - DEBUG - Using 1 as dhcp value for eth0 03-15 16:39 - root - DEBUG - Using 192.168.1.21 as default ip 03-15 16:39 - root - DEBUG - Using 1 as dhcp value for eth0 03-15 16:39 - root - DEBUG - Using 1 as dhcp value for eth0 03-15 16:39 - root - DEBUG - Using 1 as dhcp value for eth0 03-15 16:39 - root - INFO - ____Start of IR____ 03-15 16:39 - root - DEBUG - pvr150 blaster selected, setting remote to hauppauge-blaster 03-15 16:39 - root - DEBUG - Setup of remote type hauppauge-blaster 03-15 16:39 - root - DEBUG - mv /etc/lircd.conf /etc/lircd.conf-Mar-15-2015-16:39:56 03-15 16:39 - root - DEBUG - (0, '') 03-15 16:39 - root - DEBUG - mv /etc/lircrc /etc/lircrc-Mar-15-2015-16:39:56 03-15 16:39 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/lircrc\xe2\x80\x99: No such file or directory') 03-15 16:39 - root - DEBUG - mv /etc/wol-lircrc /etc/wol-lircrc-Mar-15-2015-16:39:56 03-15 16:39 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/wol-lircrc\xe2\x80\x99: No such file or directory') 03-15 16:39 - root - DEBUG - mv /etc/remote.run /etc/remote.run-Mar-15-2015-16:39:56 03-15 16:39 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/remote.run\xe2\x80\x99: No such file or directory') 03-15 16:39 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircd* Once again there is no lircrc file in the /etc/ directory Code: [mythtv@envy ~]$ dir /etc/lircrc dir: cannot access /etc/lircrc: No such file or directory [mythtv@envy ~]$ After copying the backup version of lircrc to the /etc/ directory and rebooting, the remote works again. What is the \xe2\x80\x98? Thanks for your help with this. What else should I try/post? |
Author: | brfransen [ Sun Mar 15, 2015 5:13 pm ] |
Post subject: | Re: General troubles |
The \xe2\x80\x99 and \xe2\x80\x98 are why you don't have an /etc/lircrc. The systemconfig.py is failing. I can't recreate it and this code has been basically the same for quite some time. Some more things to try: Code: sudo pacman -S python2 Code: sudo rm /usr/MythVantage/bin/*.pyc
|
Author: | brfransen [ Mon Mar 23, 2015 11:02 am ] |
Post subject: | Re: General troubles |
brfransen wrote: The \xe2\x80\x99 and \xe2\x80\x98 are why you don't have an /etc/lircrc. I am wrong about that \xe2\x80\x99 being the cause of missing lircrc. I still don't know where the \xe2\x80\x99 are coming from but I was able to reproduce them.Are you sure that is all there is in the /tmp/systemconfig_debug.log. There should be much more. What is in /tmp/systemconfig.log? |
Author: | Big boy stan [ Mon Mar 23, 2015 11:40 am ] |
Post subject: | Re: General troubles |
brfransen wrote: brfransen wrote: Are you sure that is all there is in the /tmp/systemconfig_debug.log. There should be much more. What is in /tmp/systemconfig.log? I can check again tonight but I am 100% sure that what is listed above (March 15) is the entire tmp/systemconfig_debug.log file at that time. What other types of details were you expecting? |
Author: | brfransen [ Mon Mar 23, 2015 11:50 am ] |
Post subject: | Re: General troubles |
systemconfig_debug.log should end with all the systemconfig settings. This is systemconfig_debug.log from a test system: Code: 03-23 13:13 - root - DEBUG - ______START OF DEBUG______
03-23 13:13 - root - DEBUG - Using 0 as dhcp value for eth0 03-23 13:13 - root - DEBUG - dhcp is in use, finding dhcp ip 03-23 13:13 - root - DEBUG - Finding ip address for eth0 03-23 13:13 - root - DEBUG - found interfaces:['eth0', 'lo'] 03-23 13:13 - root - DEBUG - Found eth0 in all_interfaces 03-23 13:13 - root - DEBUG - get_ip ip address is 192.168.1.69 03-23 13:13 - root - DEBUG - Using 192.168.1.69 as default ip 03-23 13:13 - root - DEBUG - Using 0 as dhcp value for eth0 03-23 13:13 - root - DEBUG - Using 0 as dhcp value for eth0 03-23 13:13 - root - DEBUG - Using 0 as dhcp value for eth0 03-23 13:13 - root - INFO - ____Start of IR____ 03-23 13:13 - root - DEBUG - Setup of remote type hauppauge-blaster 03-23 13:13 - root - DEBUG - mv '/etc/lircd.conf' '/etc/lircd.conf-Mar-23-2015-13_13_30' 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - mv /etc/lircrc /etc/lircrc-Mar-23-2015-13_13_30 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - mv /etc/wol-lircrc /etc/wol-lircrc-Mar-23-2015-13_13_30 03-23 13:13 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/wol-lircrc\xe2\x80\x99: No such file or directory') 03-23 13:13 - root - DEBUG - mv '/etc/remote.run' '/etc/remote.run-Mar-23-2015-13_13_30' 03-23 13:13 - root - DEBUG - (256, 'mv: cannot stat \xe2\x80\x98/etc/remote.run\xe2\x80\x99: No such file or directory') 03-23 13:13 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircd* 03-23 13:13 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircrc* 03-23 13:13 - root - DEBUG - including /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircrc-haupgrey-g3.txt within /etc/lircrc 03-23 13:13 - root - DEBUG - include "/usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/lircrc-haupgrey-g3.txt" 03-23 13:13 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/wol-lircrc* 03-23 13:13 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/remote.run* 03-23 13:13 - root - DEBUG - .kodi Lircmap file /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/Lircmap.xml not present 03-23 13:13 - root - DEBUG - Checking if /home/mythtv/.kodi/userdata/Lircmap.xml is a symlink 03-23 13:13 - root - DEBUG - Not a symlink /home/mythtv/.kodi/userdata/Lircmap.xml 03-23 13:13 - root - DEBUG - .plexht Lircmap file /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/Lircmap.xml not present 03-23 13:13 - root - DEBUG - Checking if /home/mythtv/.plexht/userdata/Lircmap.xml is a symlink 03-23 13:13 - root - DEBUG - Not a symlink /home/mythtv/.plexht/userdata/Lircmap.xml 03-23 13:13 - root - DEBUG - rm -f /etc/modprobe.d/mv_ir.conf 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - Using /usr/MythVantage/templates/remotes/hauppauge/hauppauge-blaster/ir.conf* 03-23 13:13 - root - DEBUG - chmod 755 /etc/lircrc /etc/wol-lircrc /etc/remote.run 03-23 13:13 - root - DEBUG - (256, 'chmod: cannot access \xe2\x80\x98/etc/wol-lircrc\xe2\x80\x99: No such file or directory\nchmod: cannot access \xe2\x80\x98/etc/remote.run\xe2\x80\x99: No such file or directory') 03-23 13:13 - root - INFO - Adding service remotes 03-23 13:13 - root - DEBUG - add_service.sh remotes 03-23 13:13 - root - DEBUG - (0, 'remotes is already present') 03-23 13:13 - root - INFO - Adding service irexec 03-23 13:13 - root - DEBUG - add_service.sh irexec 03-23 13:13 - root - DEBUG - (0, 'irexec is already present') 03-23 13:13 - root - DEBUG - Creating links for lirc 03-23 13:13 - root - DEBUG - /home/mythtv/lircrc already present 03-23 13:13 - root - DEBUG - /home/mythtv/.lircrc already present 03-23 13:13 - root - DEBUG - /etc/wol-lircrc does not exist, can not link it 03-23 13:13 - root - INFO - Configuring receiver Default 03-23 13:13 - root - DEBUG - didn't match receiver, using genric case 03-23 13:13 - root - DEBUG - scrubbing lirc from /etc/modules.mythvantage 03-23 13:13 - root - DEBUG - sed -i -e '/.*#lirc/d' /etc/modules.mythvantage 03-23 13:13 - root - DEBUG - (512, "sed: can't read /etc/modules.mythvantage: No such file or directory") 03-23 13:13 - root - INFO - Removing service igdaemon 03-23 13:13 - root - INFO - stop service igdaemon 03-23 13:13 - root - DEBUG - sv stop igdaemon 03-23 13:13 - root - DEBUG - (256, 'fail: igdaemon: unable to change to service directory: file does not exist') 03-23 13:13 - root - DEBUG - remove_service.sh igdaemon 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - INFO - Removing service tatir 03-23 13:13 - root - INFO - stop service tatir 03-23 13:13 - root - DEBUG - sv stop tatir 03-23 13:13 - root - DEBUG - (256, 'fail: tatir: unable to change to service directory: file does not exist') 03-23 13:13 - root - DEBUG - remove_service.sh tatir 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - Unloading all remote modules 03-23 13:13 - root - DEBUG - sv stop remotes 03-23 13:13 - root - DEBUG - (0, 'ok: down: remotes: 0s, normally up') 03-23 13:13 - root - DEBUG - killall -9 lircd 03-23 13:13 - root - DEBUG - (256, 'lircd: no process found') 03-23 13:13 - root - DEBUG - modprobe -r $(lsmod |grep ^lirc |awk '{print $1}') 03-23 13:13 - root - DEBUG - (256, 'modprobe: ERROR: missing parameters. See -h.') 03-23 13:13 - root - DEBUG - Start of setup_blaster_proto 03-23 13:13 - root - DEBUG - HostBlasterType: None 03-23 13:13 - root - DEBUG - Hostnumblaster: 1 03-23 13:13 - root - DEBUG - Start of setup_blaster_transmiter 03-23 13:13 - root - INFO - HostBlasterType : None 03-23 13:13 - root - DEBUG - scrubbing blaster from /etc/modules.mythvantage 03-23 13:13 - root - DEBUG - sed -i -e '/.*#blaster/d' /etc/modules.mythvantage 03-23 13:13 - root - DEBUG - (512, "sed: can't read /etc/modules.mythvantage: No such file or directory") 03-23 13:13 - root - DEBUG - load-modules-mythvantage.sh 03-23 13:13 - root - DEBUG - (0, '\x1b[0;10m\x1b[1m\x1b[34m > \x1b[0;10m\x1b[1m Loading MythVantage-modules\x1b[0;10m ') 03-23 13:13 - root - INFO - Triggering udev 03-23 13:13 - root - DEBUG - udevadm settle 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - udevadm trigger 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - udevadm settle 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - udevadm trigger 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - sv start remotes 03-23 13:13 - root - DEBUG - (0, 'ok: run: remotes: (pid 14787) 0s') 03-23 13:13 - root - DEBUG - ____Start of setup_lcd____ 03-23 13:13 - root - DEBUG - LCDType: no_lcd 03-23 13:13 - root - DEBUG - Remotetype: hauppauge-blaster 03-23 13:13 - root - INFO - Disabling LCD support 03-23 13:13 - root - DEBUG - sv stop lcdd 03-23 13:13 - root - DEBUG - (256, 'fail: lcdd: unable to change to service directory: file does not exist') 03-23 13:13 - root - DEBUG - killall -9 LCDd 03-23 13:13 - root - DEBUG - (256, 'LCDd: no process found') 03-23 13:13 - root - DEBUG - load-modules-mythvantage.sh UNLOAD LCD 03-23 13:13 - root - DEBUG - (0, 'grep: LCD: No such file or directory') 03-23 13:13 - root - DEBUG - scrubbing LCD from /etc/modules.mythvantage 03-23 13:13 - root - DEBUG - sed -i -e '/.*#LCD/d' /etc/modules.mythvantage 03-23 13:13 - root - DEBUG - (512, "sed: can't read /etc/modules.mythvantage: No such file or directory") 03-23 13:13 - root - INFO - Removing service lcdd 03-23 13:13 - root - INFO - stop service lcdd 03-23 13:13 - root - DEBUG - sv stop lcdd 03-23 13:13 - root - DEBUG - (256, 'fail: lcdd: unable to change to service directory: file does not exist') 03-23 13:13 - root - DEBUG - remove_service.sh lcdd 03-23 13:13 - root - DEBUG - (0, '') 03-23 13:13 - root - DEBUG - __End of setup_lcd 03-23 13:13 - root - INFO - __End IR 03-23 13:13 - root - DEBUG - Setting the frontend to restart due to lirc change 03-23 13:13 - root - DEBUG - ____Start of restartfe____ 03-23 13:13 - root - DEBUG - LinHES seems to be running will not restartfe 03-23 13:13 - root - DEBUG - ______cmd line options______ 03-23 13:13 - root - DEBUG - ('all', False) 03-23 13:13 - root - DEBUG - ('fileshare', False) 03-23 13:13 - root - DEBUG - ('locale', False) 03-23 13:13 - root - DEBUG - ('ir', True) 03-23 13:13 - root - DEBUG - ('misc', False) 03-23 13:13 - root - DEBUG - ('sleep', False) 03-23 13:13 - root - DEBUG - ('plugins', False) 03-23 13:13 - root - DEBUG - ('vnc', False) 03-23 13:13 - root - DEBUG - ('this_is_install', False) 03-23 13:13 - root - DEBUG - ('config_xml', False) 03-23 13:13 - root - DEBUG - ('network', False) 03-23 13:13 - root - DEBUG - ('ddns', False) 03-23 13:13 - root - DEBUG - ('restartfe', True) 03-23 13:13 - root - DEBUG - ('smolt', True) 03-23 13:13 - root - DEBUG - ('dhcp_request', False) 03-23 13:13 - root - DEBUG - ('supplemental', False) 03-23 13:13 - root - DEBUG - ('webuser', False) 03-23 13:13 - root - DEBUG - ('advancedX', False) 03-23 13:13 - root - DEBUG - ('user', False) 03-23 13:13 - root - DEBUG - ('func', False) 03-23 13:13 - root - DEBUG - ('hostypec', False) 03-23 13:13 - root - DEBUG - ('advanced', False) 03-23 13:13 - root - DEBUG - ('hostype', False) 03-23 13:13 - root - DEBUG - ('reloadfe', False) 03-23 13:13 - root - DEBUG - ('screensaver', False) 03-23 13:13 - root - DEBUG - ('audio', False) 03-23 13:13 - root - DEBUG - ('software', False) 03-23 13:13 - root - DEBUG - ______systemconfig______ 03-23 13:13 - root - DEBUG - ('AutoShutdown', '') 03-23 13:13 - root - DEBUG - ('windowmanager', 'enlightenment') 03-23 13:13 - root - DEBUG - ('nciddSerialPort', '') 03-23 13:13 - root - DEBUG - ('Xres', 'Auto') 03-23 13:13 - root - DEBUG - ('xvncenable', '0') 03-23 13:13 - root - DEBUG - ('Screensaveridle', '5') 03-23 13:13 - root - DEBUG - ('LCDtype', 'no_lcd') 03-23 13:13 - root - DEBUG - ('romdb', '0') 03-23 13:13 - root - DEBUG - ('Samba_media', '') 03-23 13:13 - root - DEBUG - ('foldingworksize', 'big') 03-23 13:13 - root - DEBUG - ('HostKeyeth0', '') 03-23 13:13 - root - DEBUG - ('supplemental', '1') 03-23 13:13 - root - DEBUG - ('UseMythWEB', '1') 03-23 13:13 - root - DEBUG - ('HostESSIDeth0', '') 03-23 13:13 - root - DEBUG - ('mednafen', '0') 03-23 13:13 - root - DEBUG - ('webonlinhes', '0') 03-23 13:13 - root - DEBUG - ('UseMythWEB_auth', '') 03-23 13:13 - root - DEBUG - ('DDnslogin', '') 03-23 13:13 - root - DEBUG - ('XIgnoreConfig', '0') 03-23 13:13 - root - DEBUG - ('HostLircWait', '') 03-23 13:13 - root - DEBUG - ('mytharchive', '1') 03-23 13:13 - root - DEBUG - ('fceux', '0') 03-23 13:13 - root - DEBUG - ('UseMythWelcome', '0') 03-23 13:13 - root - DEBUG - ('HaveCentralNFS', '') 03-23 13:13 - root - DEBUG - ('Remotebucket', 'hauppauge') 03-23 13:13 - root - DEBUG - ('webmin', '0') 03-23 13:13 - root - DEBUG - ('UseSamba', '') 03-23 13:13 - root - DEBUG - ('mythzoneminder', '0') 03-23 13:13 - root - DEBUG - ('HostActiveeth0', '1') 03-23 13:13 - root - DEBUG - ('Xcardtype', '') 03-23 13:13 - root - DEBUG - ('Samba_mediareadonly', '') 03-23 13:13 - root - DEBUG - ('HostUseEncryptioneth0', '') 03-23 13:13 - root - DEBUG - ('Shutdowntime2', '') 03-23 13:13 - root - DEBUG - ('Usebootsplash', '1') 03-23 13:13 - root - DEBUG - ('mythnetvision', '0') 03-23 13:13 - root - DEBUG - ('ReceiverType', 'Default') 03-23 13:13 - root - DEBUG - ('foldingathome', '0') 03-23 13:13 - root - DEBUG - ('mythmusic', '1') 03-23 13:13 - root - DEBUG - ('Hostupdateplan', 'Notify') 03-23 13:13 - root - DEBUG - ('Samba_domain', '') 03-23 13:13 - root - DEBUG - ('DDnshostname', '') 03-23 13:13 - root - DEBUG - ('Shutdowntime', '') 03-23 13:13 - root - DEBUG - ('Audiotypeout', '') 03-23 13:13 - root - DEBUG - ('HostUSEDHCPeth0', '0') 03-23 13:13 - root - DEBUG - ('mythappletrailers', '1') 03-23 13:13 - root - DEBUG - ('CentralNFSallhosts', '') 03-23 13:13 - root - DEBUG - ('Remotetype', 'hauppauge-blaster') 03-23 13:13 - root - DEBUG - ('ReceiverSerialport', 'ttyS0') 03-23 13:13 - root - DEBUG - ('mythnews', '1') 03-23 13:13 - root - DEBUG - ('RemoteBackupDir', '') 03-23 13:13 - root - DEBUG - ('plexhometheater', '1') 03-23 13:13 - root - DEBUG - ('SystemType', 'Master_backend') 03-23 13:13 - root - DEBUG - ('mythdns', '0') 03-23 13:13 - root - DEBUG - ('mythbrowser', '1') 03-23 13:13 - root - DEBUG - ('UseNFS', '1') 03-23 13:13 - root - DEBUG - ('HDHRlirc_device', 'No devices found') 03-23 13:13 - root - DEBUG - ('HostSerialPort_blasterlirc', 'ttyS0') 03-23 13:13 - root - DEBUG - ('xvncpassword', '') 03-23 13:13 - root - DEBUG - ('ShowTips', '1') 03-23 13:13 - root - DEBUG - ('HostGWeth0', '192.168.1.1') 03-23 13:13 - root - DEBUG - ('SoundDevice', '') 03-23 13:13 - root - DEBUG - ('xe', '0') 03-23 13:13 - root - DEBUG - ('HostTransmitproto_2', 'none') 03-23 13:13 - root - DEBUG - ('HostTransmitproto_3', 'none') 03-23 13:13 - root - DEBUG - ('HostTransmitproto_1', 'pvr150') 03-23 13:13 - root - DEBUG - ('Samba_home', '') 03-23 13:13 - root - DEBUG - ('HostTransmitproto_4', 'none') 03-23 13:13 - root - DEBUG - ('HostDNSeth0', '192.168.1.1') 03-23 13:13 - root - DEBUG - ('dvdcss', '0') 03-23 13:13 - root - DEBUG - ('Hostipeth0', '192.168.1.70') 03-23 13:13 - root - DEBUG - ('Runncidd', '') 03-23 13:13 - root - DEBUG - ('Hostnumblaster', '1') 03-23 13:13 - root - DEBUG - ('DDnsEnable', '') 03-23 13:13 - root - DEBUG - ('vncenable', '0') 03-23 13:13 - root - DEBUG - ('dolphinemu', '0') 03-23 13:13 - root - DEBUG - ('mythip', '192.168.1.69') 03-23 13:13 - root - DEBUG - ('mame', '1') 03-23 13:13 - root - DEBUG - ('NFSmount', '') 03-23 13:13 - root - DEBUG - ('HostBlasterType', 'None') 03-23 13:13 - root - DEBUG - ('XUseAdvanced', '') 03-23 13:13 - root - DEBUG - ('Screensavertype', 'xscreensaver') 03-23 13:13 - root - DEBUG - ('mupen64', '0') 03-23 13:13 - root - DEBUG - ('Audiotype', 'ALSA') 03-23 13:13 - root - DEBUG - ('HostTransmitDelay_1', '2') 03-23 13:13 - root - DEBUG - ('HostTransmitDelay_3', '2') 03-23 13:13 - root - DEBUG - ('HostTransmitDelay_2', '2') 03-23 13:13 - root - DEBUG - ('RemoteBackup', '') 03-23 13:13 - root - DEBUG - ('HostTransmitDelay_4', '2') 03-23 13:13 - root - DEBUG - ('snes9x', '0') 03-23 13:13 - root - DEBUG - ('RunDHCP', '') 03-23 13:13 - root - DEBUG - ('mythdhcp', '0') 03-23 13:13 - root - DEBUG - ('language', 'en_US') 03-23 13:13 - root - DEBUG - ('kodi', '1') 03-23 13:13 - root - DEBUG - ('huludesktop', '0') 03-23 13:13 - root - DEBUG - ('Hostnetmasketh0', '/24 255.255.255.0') 03-23 13:13 - root - DEBUG - ('default_interface', 'eth0') 03-23 13:13 - root - DEBUG - ('NFSserver', '') 03-23 13:13 - root - DEBUG - ('nciddDeviceNetCallerID', '') 03-23 13:13 - root - DEBUG - ('ncidclient', '') 03-23 13:13 - root - DEBUG - ('MVROOT', '/usr/MythVantage') 03-23 13:13 - root - DEBUG - ('UseXLargeMouse', '1') 03-23 13:13 - root - DEBUG - ('foldingusername', '') 03-23 13:13 - root - DEBUG - ('timezone', 'US/Eastern') 03-23 13:13 - root - DEBUG - ('bewait', '1') 03-23 13:13 - root - DEBUG - ('TEMPLATES', '/usr/MythVantage/templates') 03-23 13:13 - root - DEBUG - ('rootSSH', '0') 03-23 13:13 - root - DEBUG - ('Screensavertheme', 'antspotlight') 03-23 13:13 - root - DEBUG - ('hostname', 'vmtest') 03-23 13:13 - root - DEBUG - ('mythgame', '1') 03-23 13:13 - root - DEBUG - ('vncpassword', '') 03-23 13:13 - root - DEBUG - ('DDnspassword', '') 03-23 13:13 - root - DEBUG - ('mythweather', '1') 03-23 13:13 - root - DEBUG - ('mythgw', '0') 03-23 13:13 - root - DEBUG - ('mythgallery', '1') 03-23 13:13 - root - DEBUG - ('Samba_homereadonly', '') 03-23 13:13 - root - DEBUG - ('hostypec', False) 03-23 13:13 - root - DEBUG - ('HostMTUeth0', '') 03-23 13:13 - root - DEBUG - ('HOST_iswirelesseth0', '') 03-23 13:13 - root - DEBUG - ('dbhost', '127.0.0.1') 03-23 13:13 - root - DEBUG - ('EnhancedWMStyle', '1') 03-23 13:13 - root - DEBUG - ('RunFrontend', '1') |
Page 2 of 3 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |