View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 41 posts ] 
Go to page 1, 2, 3  Next

Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Sun May 03, 2015 5:14 pm 
Offline
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location: Melbourne, Australia
Since upgrading to 8.2 the myth_mtc status on Health & Maintenance has always been red. I can see no obvious errors in the myth_mtc.log and the 2 backups are being created. The only possible thing is it is looking for a frontend (vm-test) which I created a while ago be no longer exists. It seems to object to the hyphen.
How can I stop it looking for this machine?
Any other suggestions to get this back green again?

The following is the last bit of the latest myth_mtc.log
Code:
2015-05-04_08-42/pki/certmaster/ca/certmaster.key
2015-05-04_08-42/pki/certmaster/ca/serial.txt
2015-05-04_08-42/pki/certmaster/ca/certmaster.crt
2015-05-04_08-42/pki/certmaster/silverstone.csr
2015-05-04_08-42/pki/certmaster/silverstone.cert
2015-05-04_08-42/home_dir.tar.gz
Warning: /home/xymon/server/etc/mythdot:6: syntax error in line 6 near '-'
FE _FRONTEND_
MBE _MASTERBACKEND_
MBEwFW _MASTERFRONTEND_,silverstone,vm-test
SLAVEwFW _SLAVEFE_
SLAVE _SLAVEBACKEND_
STD _STANDALONE_

Created file:
    /data/storage/disk0/backup/system_backups/backup.2015-05-04_08-42.tgz

Updating menu with:
    Last backup completed 05/04/15 8:44 AM

Remote backup
    Remote backup is not enabled, copying backup to /data/storage/disk1 if it exists
    Copying system backups to /data/storage/WDCWD20EARS-00MVWB0_WD-WMAZA1408248/backup

#######################################

2015-05-04 08:44 Running System Update
Starting Update

Updating NO packages

#######################################
Finished 2015-05-04 08:42

_________________
Intel DG965WH, Dvico DVB-T Lite x2, HDHR, Gigabyte GT220, KingstonSSD, WD20EARS version=latest


Top
 Profile  
 
PostPosted: Sat May 09, 2015 7:29 pm 
Offline
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location: Melbourne, Australia
I tried copying an backup version (8.1) of /home/xymon/server/etc/mythdot but the next time myth_mtc ran it overwrote it with the reference to vm-test. Looking at /etc/hosts it only refers to silverstone (my hostname) and localhost so I don't know what is telling it to look for vm-test.

Also I notice that /home/xymon/var/hostdata/silverstone/ has hundreds of files and growing regularly since I installed 8.1. Is this normal?

_________________
Intel DG965WH, Dvico DVB-T Lite x2, HDHR, Gigabyte GT220, KingstonSSD, WD20EARS version=latest


Top
 Profile  
 
PostPosted: Sun May 10, 2015 7:38 am 
Offline
Joined: Sun Sep 05, 2004 7:06 pm
Posts: 690
http://forum.linhes.org/viewtopic.php?f ... &hilit=mtc


Top
 Profile  
 
PostPosted: Sun May 10, 2015 3:54 pm 
Offline
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location: Melbourne, Australia
Thanks for the response. I did see that post but my logs all indicate the system is idle and then proceeds with the rest of the script.

_________________
Intel DG965WH, Dvico DVB-T Lite x2, HDHR, Gigabyte GT220, KingstonSSD, WD20EARS version=latest


Top
 Profile  
 
PostPosted: Tue Jun 30, 2015 4:57 pm 
Offline
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location: Melbourne, Australia
Updating to 8.3 seems to have solved the problem

_________________
Intel DG965WH, Dvico DVB-T Lite x2, HDHR, Gigabyte GT220, KingstonSSD, WD20EARS version=latest


Top
 Profile  
 
PostPosted: Thu Jul 02, 2015 9:26 am 
Offline
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 997
Location: Lexington, Ky
I am having the same issue, but for me it didn't start until I upgraded from R8.2 to R8.3 Ever since then the Health & Maint is alway red for mtc and reports that
Code:
 Thu Jul 02 10:52:20 EDT 2015
 ** Maintenance script did not run. **
    BACKUP FILE WAS NOT CREATED
   
    The system may have been busy
    Log file: /var/log/2015-07-02/myth_mtc.log 

 12 days of guide data

 No remote backup jobs queued

Yet when you look at the log it always says:
Code:
 ##############################                      #########
2015-07-02T00:22:42.868162-04:00 mythtv myth_mtc:
2015-07-02T00:22:42.868168-04:00 mythtv myth_mtc: 2015-07-02 00:22 Running Backu                      p
2015-07-02T00:22:43.405029-04:00 mythtv myth_mtc:
2015-07-02T00:22:43.405076-04:00 mythtv myth_mtc: Starting Backup
2015-07-02T00:22:43.425513-04:00 mythtv myth_mtc:
2015-07-02T00:22:43.425552-04:00 mythtv myth_mtc: Backup mysql databases
2015-07-02T00:22:43.433566-04:00 mythtv myth_mtc: mysql 5.6.23-3
2015-07-02T00:22:43.434501-04:00 mythtv myth_mtc:     mythconverg  (mythtv datab                      ase)
2015-07-02T00:22:46.405679-04:00 mythtv myth_mtc:     ncid (caller id)
2015-07-02T00:22:46.506321-04:00 mythtv myth_mtc:     users
2015-07-02T00:22:46.955875-04:00 mythtv myth_mtc:     All databases in one file
2015-07-02T00:22:50.680261-04:00 mythtv myth_mtc: Backup saved settings
2015-07-02T00:22:50.703397-04:00 mythtv myth_mtc: Backup etc
2015-07-02T00:22:54.568143-04:00 mythtv myth_mtc: Backup func keys
2015-07-02T00:22:54.639493-04:00 mythtv myth_mtc: Backup home dirs
2015-07-02T00:22:54.699726-04:00 mythtv myth_mtc: tar: Removing leading `/' from                       member names
2015-07-02T00:26:43.258128-04:00 mythtv myth_mtc: Compress backup file
2015-07-02T00:28:34.612133-04:00 mythtv myth_mtc: FE _FRONTEND_,test
2015-07-02T00:28:34.612169-04:00 mythtv myth_mtc: MBE _MASTERBACKEND_
2015-07-02T00:28:34.612175-04:00 mythtv myth_mtc: MBEwFW _MASTERFRONTEND_,mythtv
2015-07-02T00:28:34.612179-04:00 mythtv myth_mtc: SLAVEwFW _SLAVEFE_
2015-07-02T00:28:34.612184-04:00 mythtv myth_mtc: SLAVE _SLAVEBACKEND_
2015-07-02T00:28:34.612189-04:00 mythtv myth_mtc: STD _STANDALONE_
2015-07-02T00:28:34.644344-04:00 mythtv myth_mtc:
2015-07-02T00:28:34.644377-04:00 mythtv myth_mtc: Created backup file:
2015-07-02T00:28:34.644384-04:00 mythtv myth_mtc:     /data/storage/disk0/backup                      /system_backups/backup.2015-07-02_00-22.tgz
2015-07-02T00:28:34.644983-04:00 mythtv myth_mtc:
2015-07-02T00:28:34.656378-04:00 mythtv myth_mtc: Updating menu with:
2015-07-02T00:28:34.656411-04:00 mythtv myth_mtc:     Last backup completed 07/0                      2/15 12:28 AM
2015-07-02T00:28:34.733760-04:00 mythtv myth_mtc:
2015-07-02T00:28:34.733802-04:00 mythtv myth_mtc: Remote backup
2015-07-02T00:28:34.733812-04:00 mythtv myth_mtc:     Remote backup is not enabl                      ed, copying backup to /data/storage/disk1 if it exists
2015-07-02T00:28:34.756499-04:00 mythtv myth_mtc:     Link /data/storage/disk1 d                      oesn't exist.
2015-07-02T00:28:35.259094-04:00 mythtv myth_mtc:
2015-07-02T00:28:35.259136-04:00 mythtv myth_mtc: Finished Backup


All of the other maintenance procedures complete normally as well.
The only thing I see that seems a little odd is that the time displayed is always the current system time (within 4 mins or so ) and not the time that the mtc actually ran.


Top
 Profile  
 
PostPosted: Thu Jul 02, 2015 9:50 am 
Offline
Joined: Tue Jul 01, 2014 6:49 am
Posts: 92
Interesting on the file name, mine has the master BE/FE (mbe) in the file name, I would have expected yours to look something like mythtv_myth_mtc.log:

Quote:
Thu Jul 02 10:41:58 CDT 2015

Maintenance completed successfully.
Log file: /var/log/2015-07-02/mbe_myth_mtc.log

12 days of guide data

No remote backup jobs queued

Not sure that helps, but may be a lead...

My log file backup section mirrors yours.


Top
 Profile  
 
PostPosted: Fri Jul 10, 2015 6:02 pm 
Offline
Joined: Mon Aug 14, 2006 8:24 pm
Posts: 320
Location: Melbourne, Australia
I take it back, the problem is still there. It is still looking for vm-test frontend when it does a backup.

_________________
Intel DG965WH, Dvico DVB-T Lite x2, HDHR, Gigabyte GT220, KingstonSSD, WD20EARS version=latest


Top
 Profile  
 
PostPosted: Thu Jul 16, 2015 10:20 am 
Offline
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 997
Location: Lexington, Ky
Does anyone have a solution for this problem? When I ssh into the box I am still getting:
Code:
myth_mtc on mythtv RED for 23 days, 17 hours, 36 minutes, 49 seconds

However I can see no problems in the logs. Latest full log can be found here.

Any thoughts?


Top
 Profile  
 
PostPosted: Thu Jul 30, 2015 11:20 am 
Offline
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 997
Location: Lexington, Ky
Still having this problem I have noticed one thing. In the list of machines being backed up. Mine reads:
Code:
FE _FRONTEND_,test
MBE _MASTERBACKEND_
MBEwFW _MASTERFRONTEND_,mythtv
SLAVEwFW _SLAVEFE_
SLAVE _SLAVEBACKEND_
STD _STANDALONE_

I think that "_FRONTEND_,test" is what is causing the problem. It did exist at one time but is no longer in service. The only valid machine in the list is "MBEwFW _MASTERFRONTEND_,mythtv"

Does anyone know where "_FRONTEND_,test" being picked up from?


Top
 Profile  
 
PostPosted: Thu Jul 30, 2015 12:42 pm 
Offline
Joined: Tue Jul 01, 2014 6:49 am
Posts: 92
if you do a search through Mythconverg you will find table entries for you FE, "test".

I have two "phantom" frontends in my DB and am not seeing any issues with Myth Maint. I did a search on how to remove these phantoms from the database and seemed like more of a hassle than it was worth. For me it was not creating any issues, so easy enough to leave it alone.


Top
 Profile  
 
PostPosted: Thu Jul 30, 2015 1:33 pm 
Offline
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 997
Location: Lexington, Ky
So your not getting the " Maintenance did NOT complete sucessfully" messages then.


Top
 Profile  
 
PostPosted: Thu Jul 30, 2015 4:10 pm 
Offline
Joined: Thu Jul 30, 2015 10:00 am
Posts: 35
My installation is new this afternoon and is blinking red.

Code:
 ** Maintenance did NOT complete sucessfully. **
   
    The system may have been busy.
    See the log for more information.
    Log file: /var/log/2015-07-30/mythtv_myth_mtc.log 

 7 days of guide data

 No remote backup jobs queued


Top
 Profile  
 
PostPosted: Thu Jul 30, 2015 4:22 pm 
Offline
Joined: Tue Jul 01, 2014 6:49 am
Posts: 92
amtrakuk wrote:
My installation is new this afternoon and is blinking red


The maintenance job tries to run around midnight, if this is a brand new install, the job hasn't run, check again tomorrow to see if you have a problem.


Top
 Profile  
 
PostPosted: Thu Jul 30, 2015 4:25 pm 
Offline
Joined: Thu Jul 30, 2015 10:00 am
Posts: 35
bgrant3406 wrote:
amtrakuk wrote:
My installation is new this afternoon and is blinking red


The maintenance job tries to run around midnight, if this is a brand new install, the job hasn't run, check again tomorrow to see if you have a problem.


Thanks. Am new to Myth so still getting my head around it ;)


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 41 posts ] 
Go to page 1, 2, 3  Next



All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu