View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 9 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Thu Jun 24, 2010 8:54 pm 
Offline
Joined: Mon Feb 06, 2006 11:12 am
Posts: 8
I've successfully installed R6 but on 1st boot - it launches the X11 screen I see the menu to do the initial config for one second - then it boots me out and I'm back to the yellow LINHES screen
Video card is Nvidia FX5200.
Any hints? Is it the x11 conf file likely?

Of note it successfully installs R5.5 and on 1st boot i get the X11 setup screens without problem.


Last edited by rootmoose on Mon Jul 26, 2010 8:17 pm, edited 1 time in total.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jun 24, 2010 9:50 pm 
Offline
Joined: Wed Feb 08, 2006 6:13 pm
Posts: 480
Location: IN
fire up and xterm (or ssh) and check the logs. Should be able to find some clues there.

Martian

_________________
ABIT NF-M2 nView | Athlon 64 X2 3800+ | 2GB DDR2 800 | HDHomerun | GeForce 6150 (onboard) | WD 640 GB SATA HD | DVD-RW (sata) | StreamZap IR receiver with Logitech Harmony remote

Vizio 37" LCD HDTV (1080p)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 25, 2010 12:22 am 
Offline
Joined: Fri Oct 20, 2006 12:04 pm
Posts: 905
Location: LA, CA
This usually helps me troubleshoot FE troubles like you describe. You may have to you root.

Code:
cat /var/log/Xorg.0.log |grep "(EE)"


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 26, 2010 2:18 pm 
Offline
Joined: Mon Feb 06, 2006 11:12 am
Posts: 8
Hi ran the command

# cat /var/log/Xorg.0.log |grep "(EE)"
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) config/hal: NewInputDeviceRequest failed
(EE) config/hal: NewInputDeviceRequest failed
(EE) config/hal: NewInputDeviceRequest failed
#


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 26, 2010 8:53 pm 
Offline
Joined: Fri Oct 20, 2006 12:04 pm
Posts: 905
Location: LA, CA
OK, that didn't tell much huh...

you're going to have to look through the rest of the logs. start with the rest of the /var/log/Xorg.0.log and /var/log/mythtv/mythfrontend.log You can post the logs here and someone will find the bugaboo if you can't.

Also might try to boot without the bootscreen. This will give you a verbose view as the system boots.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 26, 2010 5:15 pm 
Offline
Joined: Mon Feb 06, 2006 11:12 am
Posts: 8
was away on vacation but now back and trying to get this working here's the Xorg.0.log output

tail -100 Xorg.0.log
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): kernel module enabled successfully
(II) NVIDIA(0): Memory mapped
(II) NVIDIA(0): Interrupts enabled
(II) NVIDIA(0): Setting mode "800x600"
(II) NVIDIA(0): CRT-0 assigned CRTC 0
(II) NVIDIA(0): First mode initialized
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Visuals set up
(II) NVIDIA(0): Pixmap depths set up
(II) NVIDIA(0): GLX visuals set up
(II) NVIDIA(0): Framebuffer set up
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): Default colormap initialized.
(II) NVIDIA(0): Palette loaded
(**) Option "dpms" "false"
(II) Loading extension NV-CONTROL
(II) NVIDIA(0): Composite wrapper disabled.
(II) NVIDIA(0): Screen initialization complete
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/psaux"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "Device" "/dev/psaux"
(**) Option "Device" "/dev/psaux"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed
GetModeLine - scrn: 0 clock: 49500
GetModeLine - hdsp: 800 hbeg: 816 hend: 896 httl: 1056
vdsp: 600 vbeg: 601 vend: 604 vttl: 625 flags: 5

and then the front end.log - looks like its complaining about ntp - but that doesnt sound like it should affect X11

tail -100 /var/log/mythtv/mythfrontend.log
2010-07-26 11:07:49.544 Time zone settings on the master backend differ from those on this system.
2010-07-26 11:07:49.544 Detected time zone settings:
Master: Zone ID: 'America/Montreal', UTC Offset: '-14400', Current Time: '2010-07-26T11:07:49'
Local: Zone ID: 'America/Toronto', UTC Offset: '-14400', Current Time: '2010-07-26T11:07:49'

2010-07-26 11:07:49.544 The time and/or time zone settings on this system do not match those in use on the master backend. Please ensure all frontend and backend systems are configured to use the same time zone and have the current time properly set.
2010-07-26 11:07:49.544 Unable to run with invalid time settings. Exiting.
2010-07-26 11:07:49.569 Deleting UPnP client...
2010-07-26 13:10:08.634 mythfrontend version: branches/release-0-23-fixes [24896] www.mythtv.org
2010-07-26 13:10:08.639 Using runtime prefix = /usr
2010-07-26 13:10:08.639 Using configuration directory = /home/mythtv/.mythtv
2010-07-26 13:10:09.419 Empty LocalHostName.
2010-07-26 13:10:09.419 Using localhost value of kreacher
2010-07-26 13:10:09.419 Testing network connectivity to '10.1.100.80'

2010-07-26 13:10:19.586 UPnPautoconf() - Found one UPnP backend
2010-07-26 13:10:19.702 Testing network connectivity to '10.100.1.80'
2010-07-26 13:10:19.722 New DB connection, total: 1
2010-07-26 13:10:19.728 Connected to database 'mythconverg' at host: 10.100.1.80
2010-07-26 13:10:19.729 Closing DB connection named 'DBManager0'
Xlib: extension "Generic Event Extension" missing on display ":0.0".
2010-07-26 13:10:19.803 DPMS is disabled.
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
2010-07-26 13:10:19.845 Primary screen: 0.
2010-07-26 13:10:19.846 Connected to database 'mythconverg' at host: 10.100.1.80
2010-07-26 13:10:19.847 Using screen 0, 800x600 at 0,0
Xlib: extension "Generic Event Extension" missing on display ":0.0".
2010-07-26 13:10:19.912 Desktop video mode: 800x600 75.0019 Hz
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
2010-07-26 13:10:19.935 MythUI Image Cache size set to 20971520 bytes
2010-07-26 13:10:19.962 Enabled verbose msgs: important general
Xlib: extension "Generic Event Extension" missing on display ":0.0".
2010-07-26 13:10:20.013 Primary screen: 0.
2010-07-26 13:10:20.014 Using screen 0, 800x600 at 0,0
2010-07-26 13:10:20.027 Using theme base resolution of 800x600
2010-07-26 13:10:20.052 LIRC, Error: Failed to connect to Unix socket '/dev/lircd'
eno: No such file or directory (2)
2010-07-26 13:10:20.052 JoystickMenuThread Error: Joystick disabled - Failed to read /home/mythtv/.mythtv/joystickmenurc
2010-07-26 13:10:20.100 Using Frameless Window
2010-07-26 13:10:20.100 Using Full Screen Window
2010-07-26 13:10:20.312 Using the Qt painter
2010-07-26 13:10:20.450 XMLParseBase: Loaded base theme from '/usr/share/mythtv/themes/LinHES/base.xml'
2010-07-26 13:10:20.797 XMLParseBase: Loaded base theme from '/usr/share/mythtv/themes/default/base.xml'
2010-07-26 13:10:20.833 New DB connection, total: 2
2010-07-26 13:10:20.835 Connected to database 'mythconverg' at host: 10.100.1.80
2010-07-26 13:10:20.839 Current MythTV Schema Version (DBSchemaVer): 1254
Xlib: extension "Generic Event Extension" missing on display ":0.0".
2010-07-26 13:10:21.980 Registering Internal as a media playback plugin.
2010-07-26 13:10:22.089 Cannot load language en_us for module mytharchive
2010-07-26 13:10:22.100 Cannot load language en_us for module mythbrowser
2010-07-26 13:10:22.105 Registering WebBrowser as a media playback plugin.
2010-07-26 13:10:22.105 Cannot load language en_us for module mythbrowser
2010-07-26 13:10:22.182 MMUnix::AddDevice() Error: failed to stat /dev/bdi,
eno: No such file or directory (2)
2010-07-26 13:10:22.185 MMUnix::AddDevice() Error: failed to stat /dev/power,
eno: No such file or directory (2)
2010-07-26 13:10:22.188 MonitorRegisterExtensions(0x100, gif,jpg,png)
2010-07-26 13:10:22.189 Cannot load language en_us for module mythgallery
2010-07-26 13:10:22.210 Cannot load language en_us for module mythgame
2010-07-26 13:10:22.630 Current MythMusic Schema Version (MusicDBSchemaVer): 1017
2010-07-26 13:10:22.691 MonitorRegisterExtensions(0x40, mp3,mp2,ogg,oga,flac,wma,wav,ac3,oma,omg,atp,ra,dts,aac,m4a,aa3,tta,mka,aiff,swa,wv)
2010-07-26 13:10:22.697 Cannot load language en_us for module mythmusic
2010-07-26 13:10:22.743 Cannot load language en_us for module mythnetvision
2010-07-26 13:10:22.768 Cannot load language en_us for module mythnews
2010-07-26 13:10:22.783 Cannot load language en_us for module mythsmolt
2010-07-26 13:10:22.894 Cannot load language en_us for module mythstream
2010-07-26 13:10:22.960 Current MythVideo Schema Version (mythvideo.DBSchemaVer): 1032
2010-07-26 13:10:22.997 Cannot load language en_us for module mythvideo
2010-07-26 13:10:23.036 Cannot load language en_us for module mythweather
2010-07-26 13:10:23.047 NetworkControl: Listening for remote connections on port 6546
2010-07-26 13:10:23.049 XMLParseBase: Loading window theme from /usr/share/mythtv/themes/LinHES/menu-ui.xml
2010-07-26 13:10:23.108 Unable to find image file: ui/up.png
2010-07-26 13:10:23.108 Unable to find image file: ui/down.png
2010-07-26 13:10:23.135 Unable to find image file: watermark/radio.png
2010-07-26 13:10:23.170 Unable to find image file: watermark/pie.png
2010-07-26 13:10:23.198 Loading menu theme from /usr/share/mythtv/themes/defaultmenu//mainmenu.xml
2010-07-26 13:10:23.202 Unable to find image file: watermark/important.png
2010-07-26 13:10:23.203 Found mainmenu.xml for theme 'LinHES'
2010-07-26 13:10:23.255 Unable to find image file: watermark/radio.png
2010-07-26 13:10:23.255 Unable to find image file: watermark/pie.png
2010-07-26 13:10:23.325 Unable to find image file: ui/up.png
2010-07-26 13:10:23.325 Unable to find image file: ui/down.png
2010-07-26 13:10:23.325 Unable to find image file: watermark/radio.png
2010-07-26 13:10:23.325 Unable to find image file: watermark/pie.png
2010-07-26 13:10:23.326 Unable to find image file: watermark/important.png
2010-07-26 13:10:23.326 Unable to find image file: watermark/radio.png
2010-07-26 13:10:23.326 Unable to find image file: watermark/pie.png
2010-07-26 13:10:23.348 MythContext: Connecting to backend server: 10.100.1.80:6543 (try 1 of 1)
2010-07-26 13:10:23.361 Using protocol version 56
2010-07-26 13:10:23.504 Time zone settings on the master backend differ from those on this system.
2010-07-26 13:10:23.504 Detected time zone settings:
Master: Zone ID: 'America/Montreal', UTC Offset: '-14400', Current Time: '2010-07-26T13:10:23'
Local: Zone ID: 'America/Toronto', UTC Offset: '-14400', Current Time: '2010-07-26T13:10:23'

2010-07-26 13:10:23.504 The time and/or time zone settings on this system do not match those in use on the master backend. Please ensure all frontend and backend systems are configured to use the same time zone and have the current time properly set.
2010-07-26 13:10:23.504 Unable to run with invalid time settings. Exiting.
2010-07-26 13:10:23.540 Deleting UPnP client...
Error in my_thread_global_end(): 1 threads didn't exit


Any help is much appreciated
A


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 26, 2010 8:16 pm 
Offline
Joined: Mon Feb 06, 2006 11:12 am
Posts: 8
OK I feel silly now...
I changed the Timezone to match the master BE and guess what - it works flawlessly... Problem Solved


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 08, 2010 2:13 pm 
Offline
Joined: Sun Apr 30, 2006 9:06 pm
Posts: 59
Location: Das Hoosier State
rootmoose wrote:
OK I feel silly now...
I changed the Timezone to match the master BE and guess what - it works flawlessly... Problem Solved



Can you please tell us how you were able to change the time zone through the command line?

_________________
Proud member of the Loyal Brotherhood of Snipe Hunters - Local 414


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 08, 2010 5:23 pm 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
Das Hammer wrote:
Can you please tell us how you were able to change the time zone through the command line?


Code:
man tzselect


That is assuming it's installed on LinHES. If not, try

Code:
man -k tz


Mike

_________________
*********************
LinHES 7.4
Australian Dragon
*********************


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: Bing [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu