View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 5 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Thu Jan 19, 2012 7:17 pm 
Offline
Joined: Mon Feb 13, 2006 7:10 pm
Posts: 36
Location: Australia
I've upgraded from R5.5 to R6.01, now trying to make my way eventually up to 7.1, but have hit a stumbling block because nowhere on the system is the upgrade_to_0.22.sh script.

I followed the steps outlined in Upgrade LinHES from KnoppMyth and upgraded to R6.01 as per the instruction at the bottom of that page. Then I jumped over to Upgrade LinHES and after reading the whole page I followed the instructions at the bottom under "LinHES R6.02.00" making the assumption that I am "upgrading from a previous version" ie. upgrading from 6.01.

However there's no upgrade_to_0.22.sh to be found.

Now I'm wondering if what I should do, after the upgrade from R5.5 to R6.01, is "just select "Upgrade LinHES" from the Service Menu" as described at the top of Upgrade LinHES, then go with the steps under "LinHES R6.02.00".

It looks like I've misunderstood part of the process, and if anyone could shed some light on the best way to get from R5.5 to R7.1 I would be grateful.

_________________
LinHES 7.1, Gigabyte GA-K8NXP-SLI m/b, Athlon 64 X2 4200+, 3Gb RAM, 80GB PATA (/ & /myth), 2TB SATA (/myth/tv), Gigabyte 8600GT component-out, 2x Dvico HDTV DVB-T Lite, 1x Hauppage HVR-2200 PCIe Dual, Harmony remote with Dvico IR receiver.


Last edited by shade4 on Fri Jan 20, 2012 10:25 pm, edited 1 time in total.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 20, 2012 9:21 am 
Offline
Joined: Mon Feb 13, 2006 7:10 pm
Posts: 36
Location: Australia
I also tried doing a fresh install of R6.01 to a VirtualBox to see if upgrade_to_0.22.sh turned up... but it didn't. So I'm pretty sure I'm not doing the upgrade sequence correctly.

Most grateful for any clarification.

_________________
LinHES 7.1, Gigabyte GA-K8NXP-SLI m/b, Athlon 64 X2 4200+, 3Gb RAM, 80GB PATA (/ & /myth), 2TB SATA (/myth/tv), Gigabyte 8600GT component-out, 2x Dvico HDTV DVB-T Lite, 1x Hauppage HVR-2200 PCIe Dual, Harmony remote with Dvico IR receiver.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 20, 2012 9:35 am 
Offline
Joined: Tue Jan 18, 2005 2:07 am
Posts: 1530
Location: California
I am on 6.04. On my system that script is located in "/usr/LH/bin". Probably worth looking there if you haven't already...

_________________
Marc

The views expressed are my own and do not necessarily reflect the views of my employer.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 20, 2012 8:54 pm 
Offline
Joined: Mon Feb 13, 2006 7:10 pm
Posts: 36
Location: Australia
Thanks Marc. That's a help, as I can confirm the script isn't there.

I VirtualBox-ed 6.02 and did find it in /usr/LH/bin which seems to confirm I'm going the wrong way about the upgrade sequence.

Scotty.

_________________
LinHES 7.1, Gigabyte GA-K8NXP-SLI m/b, Athlon 64 X2 4200+, 3Gb RAM, 80GB PATA (/ & /myth), 2TB SATA (/myth/tv), Gigabyte 8600GT component-out, 2x Dvico HDTV DVB-T Lite, 1x Hauppage HVR-2200 PCIe Dual, Harmony remote with Dvico IR receiver.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 20, 2012 10:24 pm 
Offline
Joined: Mon Feb 13, 2006 7:10 pm
Posts: 36
Location: Australia
After taking a step back and actually having a think about it I've got it sorted.

upgrade_to_0.22.sh isn't supposed to be installed with R6.01, it's getting the linhes-scripts that installs it. But because the R6 repo has moved and the R6.01 /etc/pacman.conf points to the current (now R7) repo, doing pacman -Sy linhes-scripts gets the R7-ified scripts which don't include upgrade_to_0.22.sh.

Solution: After doing the upgrade from R5.5 to R6.01, change pacman.conf to point to the R6 repo. This is mentioned in the upgrade instructions for R6.03 which of course is historically correct, but for retroactive upgrades it should be done on R6.01.

_________________
LinHES 7.1, Gigabyte GA-K8NXP-SLI m/b, Athlon 64 X2 4200+, 3Gb RAM, 80GB PATA (/ & /myth), 2TB SATA (/myth/tv), Gigabyte 8600GT component-out, 2x Dvico HDTV DVB-T Lite, 1x Hauppage HVR-2200 PCIe Dual, Harmony remote with Dvico IR receiver.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu