View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Thu Jan 26, 2012 6:33 pm 
Offline
Joined: Mon Jan 23, 2012 10:36 am
Posts: 2
I am attempting to install a back end server with the LinHES install and having issues with start up. The network log in /var/log (network.init.log) has:


Computing interface groups: .. 2 interfaces found
Starting group 0/virtual (1 interfaces)
Starting lo: 'lo' is already up SKIPPED
Starting group 1/realphys (1 interfaces)
Starting eth0: ......OK
Processing /etc/net/vlantab: empt

But the ceton card "looks" like a network interface so I "think" this count is off. The ctn0
interface comes up but the eth0 interface does not:. If I log in on the console and do an ifup etho I can get it to come up. After doing this I get the following information. (I manuall started the sshd server as well).

[root@MYTH_SERV log]# ifconfig
ctn0 Link encap:Ethernet HWaddr 4A:0D:1F:92:09:08
inet addr:192.168.200.254 Bcast:192.168.200.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:164772 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:58767664 (56.0 Mb) TX bytes:3833 (3.7 Kb)
Interrupt:19

eth0 Link encap:Ethernet HWaddr 40:61:86:93:D0:EF
inet addr:192.168.0.40 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5130 errors:0 dropped:0 overruns:0 frame:0
TX packets:4759 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:450022 (439.4 Kb) TX bytes:883858 (863.1 Kb)
Interrupt:44 Base address:0x6000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1076 (1.0 Kb) TX bytes:1076 (1.0 Kb)

[root@MYTH_SERV log]#


I am attempting to get this srver working with a ceton card to test a new version of the card firmware with a tuning adapter and an mcard for encrypted channels. I can start things manaually but it really slows things down for testing. The ArchLinux website stuff for setting up system services does not seem to map to what LinHES is doing. I am a Fedora guy so some of this startup processing is familiar but in other places I am lost. If there is anyone who can point me to the startup processing so I can figure out how to fix this issue I would appreciate it.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 27, 2012 9:33 am 
Offline
Site Admin
Joined: Fri Jun 11, 2004 7:58 am
Posts: 507
The network is all controlled by etcnet.
Stuff in /etc/net will control the network configuration.

The startup process is handled by runit

/etc/sv is where all the service scripts reside. To add a service to the boot list run
add_service.sh $service name
There is no set startup order.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 27, 2012 10:39 am 
Offline
Joined: Mon Jan 23, 2012 10:36 am
Posts: 2
Ok, I guess I need to see why those are failing ... the /etc/net folder does have the eth0 stuff in it but it does not come up. The ceton card ctn0 has NO entry there and it does come up. Maybe the ceton card is taking the eth0 stuff down. Thanks for the feedback.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu