| LinHES Forums http://forum.linhes.org/ |
|
| Install Hang -SOLVED!! http://forum.linhes.org/viewtopic.php?f=22&t=24046 |
Page 1 of 1 |
| Author: | meierjo [ Thu Aug 28, 2014 7:54 am ] |
| Post subject: | Install Hang -SOLVED!! |
Having a similar hang as viewtopic.php?f=22&t=23966&hilit=hang I'm installing a front end only system with a Intel Graphics controller (integrated), 2Gb RAM, and a E4500 CPU. Looking in the /tmp/mythvantage_install.log, I see: ______No database required, continuing configuration________ double bind mount attempt sh: -c: line 1: syntax error near unexpected token `;' sh: -c: line 1: `; } 2>&1' ______Unmounting disk______ mv_install.py exit code 0 2014-08-28 01:14:01.014358 I New DB connection, total: 1 2014-08-28 01:14:01.016154 N Entering standby mode after 90 minutes of inactivity 2014-08-28 02:44:01.014350 I New DB connection, total: 1 2014-08-28 04:14:01.014321 I New DB connection, total: 1 2014-08-28 05:44:01.014330 I New DB connection, total: 1 2014-08-28 07:14:01.014333 I New DB connection, total: 1 2014-08-28 08:15:43.319237 I New DB connection, total: 1 2014-08-28 08:15:43.320070 N Leaving standby mode Any thoughts on this error? |
|
| Author: | meierjo [ Thu Aug 28, 2014 8:24 am ] |
| Post subject: | Re: Install Hang |
One more tidbit: Forcing a reboot results in the following message on the screen: No bootable device -- insert boot disk and press any key This appears to be a BIOS message. |
|
| Author: | jams [ Thu Aug 28, 2014 8:51 am ] |
| Post subject: | Re: Install Hang |
There should also be a debug log in /tmp What does it say? |
|
| Author: | meierjo [ Thu Aug 28, 2014 9:01 am ] |
| Post subject: | Re: Install Hang |
meierjo wrote: One more tidbit: Forcing a reboot results in the following message on the screen: No bootable device -- insert boot disk and press any key This appears to be a BIOS message. I threw in a nvidia card (Zotac G210) and it made it all the way through the install. I pressed the Reboot button and took out the disk. The FE rebooted and I got the same "No Bootable Device..." error. |
|
| Author: | jams [ Thu Aug 28, 2014 9:16 am ] |
| Post subject: | Re: Install Hang |
Might be this problem: viewtopic.php?f=22&t=23866&hilit=fdisk |
|
| Author: | meierjo [ Thu Aug 28, 2014 9:39 am ] |
| Post subject: | Re: Install Hang |
jams wrote: There should also be a debug log in /tmp What does it say? Took out the Nvidia card and did another install... same error - logs attached! Thanks! |
|
| Author: | meierjo [ Thu Aug 28, 2014 9:44 am ] |
| Post subject: | Re: Install Hang SOLVED!!!! |
jams wrote: Might be this problem: viewtopic.php?f=22&t=23866&hilit=fdisk Yup - that was it. Got to the hang part, manually toggled the boot flag using fdisk, then forced a reboot and she came right up! Thanks! |
|
| Author: | jams [ Thu Aug 28, 2014 9:57 am ] |
| Post subject: | Re: Install Hang -SOLVED!! |
Glad that was it..but it shouldn't be needed. |
|
| Author: | meierjo [ Thu Aug 28, 2014 10:30 am ] |
| Post subject: | Re: Install Hang -SOLVED!! |
jams wrote: Glad that was it..but it shouldn't be needed. Was using 8.1.1 BTW. Open to test patches if you'd like - contact me if you'd like! |
|
| Author: | bgrant3406 [ Thu Aug 28, 2014 10:54 am ] |
| Post subject: | Re: Install Hang -SOLVED!! |
jams wrote: Glad that was it..but it shouldn't be needed. When I migrated to LinHES 8.1, I had to do the same for an asus mb/Intel pentium system to get it to boot, on the 3 zotac ion systems I did not have to do this. Drove me crazy til I found the linked info about fdisk. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|