LinHES Forums http://forum.linhes.org/ |
|
hauppauge remote not working http://forum.linhes.org/viewtopic.php?f=22&t=24048 |
Page 1 of 1 |
Author: | meierjo [ Wed Sep 03, 2014 9:29 am ] |
Post subject: | hauppauge remote not working |
I'm having a tough time getting my Hauppauge remote working. It's the PVR150 silver blaster remote. Was working before upgrading to linHES 8- any thoughts on where to start? Thanks! |
Author: | graysky [ Wed Sep 03, 2014 12:32 pm ] |
Post subject: | Re: hauppauge remote not working |
Is lirc running? Is it able to receive signals from the remote? For inspiration: https://wiki.archlinux.org/index.php/Lirc |
Author: | meierjo [ Wed Sep 03, 2014 10:59 pm ] |
Post subject: | Re: hauppauge remote not working |
graysky wrote: Is lirc running? Is it able to receive signals from the remote? For inspiration: https://wiki.archlinux.org/index.php/Lirc Lirc seems to be running: Code: ps -ef |grep lirc root 2364 562 0 11:49 ? 00:00:00 /usr/sbin/lircd -r -n -d --output /var/run/lirc/lircd root 2387 2112 0 11:49 pts/2 00:00:00 grep lirc No signals seen when running Code: irw The link you cite seems to be different lire than what's rolled up with LinHES. For example, systemctl is used to start/stop lirc in the link. That command is not on the LinHES system. Also some of the config files in the link do not match locations in LinHES. Perhaps a different version of lirc is being used and a different system to start services? Here's some log that seems to indicate it's not even getting the config file, not able to open the device (there's no /dev/lirc0 BTW) and the hardware is not initializing. Code: Sep 3 11:38:04 meierjo_linhes lircd: accepted new client on /var/run/lirc/lircd Sep 3 11:49:39 meierjo_linhes lircd: caught signal Sep 3 11:49:39 meierjo_linhes lircd: could not open config file '/var/run/lirc/lircd' Sep 3 11:49:39 meierjo_linhes lircd: No such device or address Sep 3 11:49:39 meierjo_linhes lircd: lircd(default) ready, using /var/run/lirc/lircd Sep 3 11:49:41 meierjo_linhes lircd: accepted new client on /var/run/lirc/lircd Sep 3 11:49:41 meierjo_linhes lircd: could not get file information for --output Sep 3 11:49:41 meierjo_linhes lircd: default_init(): No such file or directory Sep 3 11:49:41 meierjo_linhes lircd: WARNING: Failed to initialize hardware Sep 3 11:50:24 meierjo_linhes lircd: caught signal Anyone know how LinHES fires off Lirc upon boot? I'll start with that script and see where it get me..... |
Author: | brfransen [ Thu Sep 04, 2014 5:41 am ] |
Post subject: | Re: hauppauge remote not working |
http://linhes.org/projects/linhes/wiki/Remotes |
Author: | meierjo [ Fri Sep 05, 2014 12:47 am ] |
Post subject: | Re: hauppauge remote not working |
brfransen wrote: http://linhes.org/projects/linhes/wiki/Remotes Great reading, but in the end, I gave up using the Hauppauge blaster/remote and dusted off a MCE remote/blaster that i had laying around. Got it to change channels on my STB/Digital Adaptor using the following: http://ubuntuforums.org/archive/index.p ... 28599.html |
Author: | jams [ Fri Sep 05, 2014 1:12 pm ] |
Post subject: | Re: hauppauge remote not working |
I think dropping the hauppauge remote was a good idea. In general hauppauge remotes are unmaintained with LinHES 8+. To my knowledge none of the devs use them or have the capacity to test them. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |