| LinHES Forums http://forum.linhes.org/ |
|
| System won't boot after R8.3 pacman upgrade http://forum.linhes.org/viewtopic.php?f=22&t=24192 |
Page 1 of 2 |
| Author: | tscholl [ Thu Jun 18, 2015 2:58 pm ] |
| Post subject: | System won't boot after R8.3 pacman upgrade |
I ran the upgrade completed with no errors. After waiting a few minutes I rebooted. Now the system starts to boot but fails with the following message. Code: Waiting 10 sec for disk ........bla.bla.bla ERROR: device 'UUID=<myUuid>' not found, skip fsck. ERROR: Unable to find root device You are being dropped to a recovery shell Type 'exit' to try and continue booting sh: cant't access tty: job control turned off At this point the keyboard does not work. Basically sounds line the same problem as this post. I booted from and install cd and ran "blkid" and it return the same <myUuid> as in the error message. I also looked in the /etc/fstab as suggested but there are no numbers there just: Code: tmpfs /tmp tmps nodev,nosuid 0 0 Ok so I forgot to mount /dev/sda1 Getting out of my comfort zone here, Here is /dev/sda1 fstab/dev/mapper/arch_root-image / auto defaults 0 0 /dev/mapper/arch_lib_modules -- etc Code: # <file system> <dir> <type> <options> <dump> <pass> /dev/sr0 /media/cdrom auto ro,user,noauto,unhide 0 0 UUID=b698b7a5-adab-4b7f-94b8-27df61065b23 / ext3 defaults,noatime,acl 0 1 UUID=0fb1a87e-2202-4faa-aa56-abd2ae91a07a /data/storage/disk0 xfs defaults,noatime 0 1 UUID=dafab3c2-8a00-4741-99cf-48ac0c80360f /home ext3 defaults,noatime,acl 0 1 UUID=1c3fcbbe-1193-486c-bdab-125c7cd21376 /data/srv/mysql ext3 defaults,noatime,acl 0 1 UUID=ec40ac11-c11a-4f4d-ab01-d1e93bb4cb0d swap swap defaults 0 0 /data/storage/disk0 /data/storage/HitachiHDS721010DLE630_MSE5215V047KGE none rw,bind 0 0 #STARTSCRUB --------------anything in this block will be scrubbed #ENDSCRUB After I mounted /dev/sda1 , and looked at the fstab if looks like the numbers are there but there is a lot of spaces. Between entries etc. Can I just edit those out? Or can I recreate one? Not really sure what do I need to do here to get things going. So for now I'm dead in the water. Not sure were to go from here? UPDATE:Removed the 9 lines in front the the first line of the fstab and the blank line between each entry. Still no joy. Still fails with the same error. Also checked /boot/grub/grub.cfg and it has the correct UUID that it says it can't find. |
|
| Author: | tscholl [ Fri Jun 19, 2015 12:03 pm ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
One thing I have noticed is that on my working box is that when it starts booting the kernel it says: Code: Booting the kernel. :: running early hook [udev] :: running hook [udev] :: Triggering uevents... :: running hook [v86d] :: running hook [plymouth] :: Loading plymouth..done : performing fsck on ' /dev/sda1' /dev/sda1: clean, 90219/305216 files, 620781/1220608 blocks *******************Warning ****************************** * * The root deulce Is not configured to be Mounted * read-urite! It may be fsck'd again later. * ********************************************************* : mounting '/dev/sda1' on real root. : running cleamup hook [udev] runit: $ld: 2Sda3bfl6f7bed41038b8a039d2r8e8c9bbcre822b $: booting, runit: enter stage: /etc/runit/1 > LinHES The Hone Entertainment System And never mentions the UUID at all. Something must be missing but I don't know where. Have also added some information from the pacman.log Code: The Building Image fom preset: Starting build: 3.18.14.1-ARCH Running buikd hook : [base] Running buikd hook : [udev] Running build hook: ]auttodetect] find: 'sort' terminated by signale 9 modprobe: ERROR: missing parameters. See -h. Running buikd hook : [modconf] Running buikd hook : [block] Error binary dependency 'libpng15.so.15' not found for 'usr/lib/plymouth//script.so' Error binary dependency 'libpng15.so.15' not found for 'usr/lib/plymouth//script.so' Then runs it again Starting build: 3.18.14.1-ARCH Running buikd hook : [base] Running buikd hook : [udev] Running buikd hook : [modconf] Running buikd hook : [block] WARNING: possibly missing firmware for module: aic94xx Running buikd hook : [filessystms] Running buikd hook : keyboard] Running buikd hook : [fsck] Running buikd hook : [v86d] Running buikd hook : [plymouth] Error binary dependency 'libpng15.so.15' not found for 'usr/lib/plymouth//script.so' Error binary dependency 'libpng15.so.15' not found for 'usr/lib/plymouth//script.so' ....... no other errors. ...................... Generating moudle dependencies Image generations successful Don't know it that's unusual or not, |
|
| Author: | brfransen [ Sun Jun 21, 2015 10:34 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
If that is all that is in your /etc/fstab there is something definitely missing. Do you have any other fstab backups in /etc? Or restore /etc/fstab from a backup. There is nothing in recent updates that I can think that should have touched /etc/fstab. A basic fstab should look something like: Code: # <file system> <dir> <type> <options> <dump> <pass>
/dev/sr0 /media/cdrom auto ro,user,noauto,unhide 0 0 UUID=38439508-5452-4eb4-b097-6358f4fbdcbb / ext4 defaults,noatime,acl 0 1 UUID=7e92ea17-20fc-4a1b-ad1c-25c83266c713 /data/storage/disk0 xfs defaults,noatime 0 1 UUID=7d2e5bc4-92c4-46ba-b4d7-066d806efbb8 /home ext4 defaults,noatime,acl 0 1 UUID=a2e3c676-f204-45a4-9d6e-d7dd840e491e /data/srv/mysql ext3 defaults,noatime,acl 0 1 UUID=e6e2113e-b8be-488b-887a-1070c62500e2 swap swap defaults 0 0 /data/storage/disk0 /data/storage/VBOXHARDDISK_VBe8e12798-eb3eb018 none rw,bind 0 0 #STARTSCRUB --------------anything in this block will be scrubbed #ENDSCRUB |
|
| Author: | tscholl [ Sun Jun 21, 2015 10:49 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
Thanks for the reply you missed the part about the fstab. Quote: Ok so I forgot to mount /dev/sda1 Getting out of my comfort zone here, After I mounted /dev/sda1 , and looked at the fstab if looks like the numbers are there but there is a lot of spaces. UPDATE:Removed the 9 lines in front the the first line of the fstab and the blank line between each entry. Still no joy. Still fails with the same error. Also checked /boot/grub/grub.cfg and it has the correct UUID that it says it can't find. So my fstab now looks just like the sample you posted. I think the issue has something to do with the message saying Code: Waiting 10 sec for disk ........bla.bla.bla ERROR: device 'UUID=<myUuid>' not found, skip fsck. and not Code: :: Loading plymouth..done
: performing fsck on ' /dev/sda1' |
|
| Author: | brfransen [ Sun Jun 21, 2015 10:58 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
I didn't miss that part but it doesn't make sense to me if what you posted is your entire fstab. Please post your entire fstab. |
|
| Author: | tscholl [ Sun Jun 21, 2015 11:31 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
What I posted was not the fstab from /dev/sda1 but what I saw after i booted from R8,2 install cd before I mount /dev/sda1. Sorry about that. I updated the earlier post as well. Here is my fstab after I removed the white spaces. (extra carriage returns between lines) Code: # <file system> <dir> <type> <options> <dump> <pass>
/dev/sr0 /media/cdrom auto ro,user,noauto,unhide 0 0 UUID=b698b7a5-adab-4b7f-94b8-27df61065b23 / ext3 defaults,noatime,acl 0 1 UUID=0fb1a87e-2202-4faa-aa56-abd2ae91a07a /data/storage/disk0 xfs defaults,noatime 0 1 UUID=dafab3c2-8a00-4741-99cf-48ac0c80360f /home ext3 defaults,noatime,acl 0 1 UUID=1c3fcbbe-1193-486c-bdab-125c7cd21376 /data/srv/mysql ext3 defaults,noatime,acl 0 1 UUID=ec40ac11-c11a-4f4d-ab01-d1e93bb4cb0d swap swap defaults 0 0 /data/storage/disk0 /data/storage/HitachiHDS721010DLE630_MSE5215V047KGE none rw,bind 0 0 #STARTSCRUB --------------anything in this block will be scrubbed #ENDSCRUB |
|
| Author: | brfransen [ Sun Jun 21, 2015 1:14 pm ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
That fstab looks right. The errors from the pacman.log look like maybe the kernel image got messed up. I think an ISO upgrade would be the easiest to fix it. |
|
| Author: | tscholl [ Mon Jun 22, 2015 6:10 pm ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
Ended up doing a ISO upgrade. Everything is good except my remote.not all the keys are working. Found another post with a similar issue, and had to put a copy of the lircd.conf in /etc/lirc as well. |
|
| Author: | brfransen [ Tue Jun 23, 2015 6:58 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
After doing the ISO upgrade did you do a pacman -Syu? There were some issues with lirc but they were fixed after the ISO. Overwriting /etc/lirc/lircd.conf will cause issues in the future. |
|
| Author: | tscholl [ Tue Jun 23, 2015 9:57 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
So I need replace the /etc/lirc/lircd.conf with the original /etc/lirc/lircd.conf file that looks like this: Code: # Populated config files can be found at http://sf.net/p/lirc-remotes. The # irdb-get(1) and lirc-setup(1) tools can be used to search and download # config files. # # From 0.9.2 config files could just be dropped as-is in the lircd.conf.d # directory and be included by this file. include "lircd.conf.d/*.conf" And then run pacman -Syu Anything else I need to do after that? |
|
| Author: | brfransen [ Tue Jun 23, 2015 10:05 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
You shouldn't need to replace /etc/lirc/lircd.conf as the updated lirc pkg should overwrite it. The updated LinHES-config pkg should run systemconfig.py to put the templated lircd.conf into /etc/lirc/lircd.conf.d/ for you. Unless your lircd.conf is custom and then you should really create your own custom template: http://linhes.org/projects/linhes/wiki/ ... -Templates |
|
| Author: | tscholl [ Tue Jun 23, 2015 10:49 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
I already have a custom one setup and am using that. I also an issue with tuning my HDPVR have opened a hardware issue here for that. I know there is a way to recycle lircd without a reboot but can't seem to figure it out. I thought sv stop lircd use to work but doesn't now. Thanks |
|
| Author: | brfransen [ Tue Jun 23, 2015 11:47 am ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
If your custom template is set up then everything should be put in the right place with a pacman -Syu. The lircd service went away with R7.3: http://linhes.org/projects/linhes/wiki/ ... r-Releases |
|
| Author: | tscholl [ Tue Jun 23, 2015 3:01 pm ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
So is there is no way to test changes made to your remote txt and .conf with out a reboot. |
|
| Author: | brfransen [ Tue Jun 23, 2015 8:47 pm ] |
| Post subject: | Re: System won't boot after R8.3 pacman upgrade |
The remotes service replaced the lircd service but still runs lirc if that is what the remote config calls for. So sudo sv restart remotes would restart lircd and reload a changed lircd.conf. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|