View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 2 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Thu Aug 05, 2010 10:31 pm 
Offline
Joined: Tue Feb 14, 2006 12:07 am
Posts: 132
Location: White City OR
I was running R6.02 and updated to R6.03 soon after I noticed one of my tuners was missing in the "Backend Status" page on the web interface.

After some digging I found it was my HVR-1600 that was working fine in the previous version of R6. Was there anything that changed in that update to cause it to stop working?

I can see all four of my tuners listed in lspci
Code:
02:0a.0 Multimedia video controller: Conexant Systems, Inc. CX23418 Single-Chip                    MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder
02:0b.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)                    MPEG-2 Encoder (rev 01)
02:0c.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)                    MPEG-2 Encoder (rev 01)
02:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)                    MPEG-2 Encoder (rev 01)


I never shows up in dmesg though. I also tried "dmesg | grep 23418" hoping to see the chipset for the HVR-1600 got nothing out. If its broken then oh well maybe next update.

Code:
dmesg | grep ivtv
ivtv:  Start initialization, version 1.4.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ivtv0: Autodetected Hauppauge WinTV PVR-150
cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ivtv1: Initializing card #1
ivtv1: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:02:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ivtv1: Autodetected Hauppauge WinTV PVR-150
cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: Registered device video1 for encoder MPG (4096 kB)
ivtv1: Registered device video33 for encoder YUV (2048 kB)
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
ivtv1: Registered device video25 for encoder PCM (320 kB)
ivtv1: Initialized card #1: Hauppauge WinTV PVR-150
ivtv2: Initializing card #2
ivtv2: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:02:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ivtv2: Autodetected Hauppauge WinTV PVR-150
cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #2)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #2)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2)
ivtv2: Registered device video2 for encoder MPG (4096 kB)
ivtv2: Registered device video34 for encoder YUV (2048 kB)
ivtv2: Registered device vbi2 for encoder VBI (1024 kB)
ivtv2: Registered device video26 for encoder PCM (320 kB)
ivtv2: Initialized card #2: Hauppauge WinTV PVR-150
ivtv:  End initialization
ivtv 0000:02:0b.0: firmware: requesting v4l-cx2341x-enc.fw
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv 0000:02:0c.0: firmware: requesting v4l-cx2341x-enc.fw
ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Encoder revision: 0x02060039
ivtv 0000:02:0d.0: firmware: requesting v4l-cx2341x-enc.fw
ivtv2: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv2: Encoder revision: 0x02060039


Last edited by yaplej on Mon Aug 16, 2010 4:27 pm, edited 1 time in total.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 07, 2010 11:09 pm 
Offline
Joined: Tue Feb 14, 2006 12:07 am
Posts: 132
Location: White City OR
Hey what the heck the path changed to /dev/v4l/video0 like its stated in this post.
http://mysettopbox.tv/phpBB2/viewtopic. ... ht=hvr1600

I thought my tuner might have bit the dust there for a while.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu