| LinHES Forums http://forum.linhes.org/ |
|
| R6.03 update break HVR-1600 support? [SOLVED] http://forum.linhes.org/viewtopic.php?f=23&t=21270 |
Page 1 of 1 |
| Author: | yaplej [ Thu Aug 05, 2010 10:31 pm ] |
| Post subject: | R6.03 update break HVR-1600 support? [SOLVED] |
I was running R6.02 and updated to R6.03 soon after I noticed one of my tuners was missing in the "Backend Status" page on the web interface. After some digging I found it was my HVR-1600 that was working fine in the previous version of R6. Was there anything that changed in that update to cause it to stop working? I can see all four of my tuners listed in lspci Code: 02:0a.0 Multimedia video controller: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder 02:0b.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 02:0c.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 02:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) I never shows up in dmesg though. I also tried "dmesg | grep 23418" hoping to see the chipset for the HVR-1600 got nothing out. If its broken then oh well maybe next update. Code: dmesg | grep ivtv
ivtv: Start initialization, version 1.4.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ivtv0: Autodetected Hauppauge WinTV PVR-150 cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 ivtv1: Initializing card #1 ivtv1: Autodetected Hauppauge card (cx23416 based) ivtv 0000:02:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ivtv1: Autodetected Hauppauge WinTV PVR-150 cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: Registered device video1 for encoder MPG (4096 kB) ivtv1: Registered device video33 for encoder YUV (2048 kB) ivtv1: Registered device vbi1 for encoder VBI (1024 kB) ivtv1: Registered device video25 for encoder PCM (320 kB) ivtv1: Initialized card #1: Hauppauge WinTV PVR-150 ivtv2: Initializing card #2 ivtv2: Autodetected Hauppauge card (cx23416 based) ivtv 0000:02:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ivtv2: Autodetected Hauppauge WinTV PVR-150 cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #2) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #2) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2) ivtv2: Registered device video2 for encoder MPG (4096 kB) ivtv2: Registered device video34 for encoder YUV (2048 kB) ivtv2: Registered device vbi2 for encoder VBI (1024 kB) ivtv2: Registered device video26 for encoder PCM (320 kB) ivtv2: Initialized card #2: Hauppauge WinTV PVR-150 ivtv: End initialization ivtv 0000:02:0b.0: firmware: requesting v4l-cx2341x-enc.fw ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 ivtv 0000:02:0c.0: firmware: requesting v4l-cx2341x-enc.fw ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 ivtv 0000:02:0d.0: firmware: requesting v4l-cx2341x-enc.fw ivtv2: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv2: Encoder revision: 0x02060039 |
|
| Author: | yaplej [ Sat Aug 07, 2010 11:09 pm ] |
| Post subject: | |
Hey what the heck the path changed to /dev/v4l/video0 like its stated in this post. http://mysettopbox.tv/phpBB2/viewtopic. ... ht=hvr1600 I thought my tuner might have bit the dust there for a while. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|