LinHES Forums http://forum.linhes.org/ |
|
HD PVR 1212 configuration LinHES 8.1 http://forum.linhes.org/viewtopic.php?f=23&t=24037 |
Page 2 of 2 |
Author: | snaproll [ Mon Sep 01, 2014 9:28 am ] |
Post subject: | Re: HD PVR 1212 configuration LinHES 8.1 |
Thanks for the heads up on how that works, Jams. I intend to take a shot at that fix, but am hung up timewise at the moment (wife has a complete interior house repaint going on) and my spare 'test' computer is still down with motherboard problems. |
Author: | tscholl [ Mon Sep 01, 2014 12:45 pm ] |
Post subject: | Re: HD PVR 1212 configuration LinHES 8.1 |
jams, Thanks for the information. I looked but did not have an /etc/remote.run file, so I created one as suggested. Once created I changed the permissions to 755, however it did not run remote.run at start up. remotes.log looks like this. Code: ====== lirc modules already loaded ========== lirc_i2c 6443 0 lirc_dev 9039 1 lirc_i2c i2c_core 20707 20 bttv,ivtv,lirc_i2c,pvrusb2,hdpvr,tuner,saa7115,i2c_piix4,tda8290,tda9887,i2c_algo_bit, cx88_vp3054_i2c, cx8800,cx88xx,msp3400,nvidia,v4l2_common,tveeprom,tuner_simple,videodev ====== lirc modules end ========= /usr/sbin/lircd -H udp -d 5000 -n lircd: lircd(udp) ready, using /var/run/lirc/lircd lircd: accepted new client on /var/run/lirc/lircd lircd: Initializing UDP: 5000 lircd: Listening on port 5000/udp lircd: accepted new client on /var/run/lirc/lircd Looking at the /etc/sv/remotes/run and if I'm understanding the code correctly, the script finds the SiliconDust_HDHR but, then skips the /etc/remote.run Quote: elif [ x$ReceiverType = "xSiliconDust_HDHR" ] then # if using the SiliconDust_HDHR as an I/R Receiver CMD="/usr/sbin/lircd -H udp -d 5000 -n" printhl " Using SiliconDust on port 5000" echo $CMD >>$LOG $CMD >>$LOG 2>>$LOG else if [ -f /etc/remote.run ] then #program must not terminate. stat_runit "Starting remotes from /etc/remote.run" LCMD="/etc/remote.run" echo "Starting remotes from $LCMD" >>$LOG exec $LCMD >>$LOG 2>>$LOG else #/etc/remote.run not found, carry one with normal init LASTCMD="" USE_BLASTER="False" DEFINED_RECEIVER="False" It's possible that I have a unique situation not previously encountered. Thanks |
Author: | jams [ Mon Sep 01, 2014 12:52 pm ] |
Post subject: | Re: HD PVR 1212 configuration LinHES 8.1 |
If an hdhr is defined you are correct it will not run remotes.run. In this case use lirc.sh it's the very first thing the remotes service looks for. |
Author: | tscholl [ Mon Sep 01, 2014 3:05 pm ] |
Post subject: | Re: HD PVR 1212 configuration LinHES 8.1 |
So in that case will I also need to include my own code to configure the hdhr receiver? |
Author: | jams [ Mon Sep 01, 2014 3:37 pm ] |
Post subject: | Re: HD PVR 1212 configuration LinHES 8.1 |
Yes when lirc.sh is used then it's completely up to the contents of lirc.sh to configure lircd. |
Page 2 of 2 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |