LinHES Forums http://forum.linhes.org/ |
|
lirc_zilog problem after rebuild - Resolved http://forum.linhes.org/viewtopic.php?f=23&t=25081 |
Page 1 of 1 |
Author: | tscholl [ Wed Sep 18, 2019 9:27 pm ] |
Post subject: | lirc_zilog problem after rebuild - Resolved |
I just rebuilt and restored data to a new drive and have everything working except the blaster in my hdpvr. When I use to load lirc_zilog I use to get the following in dmesg log Code: [ 40.234796] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [ 40.235044] lirc_zilog: Zilog/Hauppauge IR driver initializing [ 40.238614] lirc_zilog: probing IR Rx on Hauppage HD PVR I2C (i2c-2) [ 40.238650] lirc_zilog: probe of IR Rx on Hauppage HD PVR I2C (i2c-2) done. Waiting on IR Tx. [ 40.238652] lirc_zilog: probe of IR Rx on Hauppage HD PVR I2C (i2c-2) done [ 40.238660] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-2) [ 40.299744] i2c i2c-2: lirc_dev: driver lirc_zilog registered at minor = 1 [ 40.299748] lirc_zilog: IR unit on Hauppage HD PVR I2C (i2c-2) registered as lirc1 and ready [ 40.299751] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-2) done [ 40.299777] lirc_zilog: initialization complete Now the only thing dmesg reports is Code: [ 6.609369] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [ 6.610135] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [ 6.628313] i2c i2c-5: lirc_dev: driver lirc_zilog registered at minor = 0 I need to know what the IR unit on Hauppage HD PVR I2C (i2c-2) registered as lircx What am I missing? |
Author: | tscholl [ Fri Sep 20, 2019 12:19 pm ] |
Post subject: | Re: lirc_zilog problem after rebuild |
Ok after another good nights sleep I dug a little deeper into the the dmesg log. Seems that just using dmesg | grep lirc_zilog I wasn't giving me all the message. Finally looked at the used dmesg | more and found what I was missing. Code: [ 6.598330] hdpvr 6-2:1.0: device now attached to video0 [ 6.598378] usbcore: registered new interface driver hdpvr [ 6.673252] lirc_dev: IR Remote Control driver registered, major 245 [ 6.714513] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [ 6.715226] Zilog/Hauppauge IR driver initializing [ 6.718566] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [ 6.720876] probing IR Rx on Hauppage HD PVR I2C (i2c-5) [ 6.721058] probe of IR Rx on Hauppage HD PVR I2C (i2c-5) done. Waiting on IR Tx. [ 6.721069] i2c i2c-5: probe of IR Rx on Hauppage HD PVR I2C (i2c-5) done [ 6.721122] probing IR Tx on Hauppage HD PVR I2C (i2c-5) [ 6.797642] i2c i2c-5: lirc_dev: driver lirc_zilog registered at minor = 0 [ 6.797649] i2c i2c-5: IR unit on Hauppage HD PVR I2C (i2c-5) registered as l irc0 and ready [ 6.797655] i2c i2c-5: probe of IR Tx on Hauppage HD PVR I2C (i2c-5) done [ 6.797710] initialization complete Still not quite sure what fixed it but the last thing I did was to create a /etc/lirc/hardware.conf file Code: #Chosen IR transmitter TRANSMITTER="HD-PVR" TRANSMITTER_MODULES="lirc_dev lirc_zilog" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="/dev/lirc0" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" After that I restarted lirc and things worked. I did a few other things as well will try to figure out exactly what fixed it when I have some more time. |
Author: | mattbatt [ Fri Sep 20, 2019 11:17 pm ] |
Post subject: | Re: lirc_zilog problem after rebuild - Resolved |
Glad to hear you got it magically fixed. Sometimes I'd rather be lucky than good. |
Author: | tscholl [ Sun Sep 22, 2019 10:10 pm ] |
Post subject: | Re: lirc_zilog problem after rebuild - Resolved |
Lucky does help that's for sure. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |