View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 10 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Sun Apr 11, 2010 12:51 pm 
Offline
Joined: Sat Oct 15, 2005 11:45 pm
Posts: 25
Today I was playing around with the video resolution settings (CPU +, Normal selections). After I rebooted the machine the front end and X doesn't come up, it just has the LinHES background with 100% booting.
I would like to include what it says when I press F2, but I dont know where to find that log.

I looked in the dmesg, but there were no errors, but included it anyways.
Could someone please help me outta this mess. Let me know anything else I can provide, since I am really not sure where to look.

Thank you,
Mitch

Here is what is running for user mythtv:
Code:
  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
 5601 mythtv    37  17  123m  49m  12m S  8.6  4.9   2:03.10 mythcommflag
 4504 mythtv    20   0  264m  38m  13m S  2.0  3.8   0:50.95 mythbackend
 5617 mythtv    20   0  2176 1056  828 R  0.3  0.1   0:00.02 top
 4466 mythtv    20   0 11328 9436 2168 S  0.0  0.9   0:00.32 mediaserv
 5243 mythtv    20   0 11328 7740  476 S  0.0  0.7   0:00.00 mediaserv
 5244 mythtv    20   0 11328 7744  476 S  0.0  0.7   0:00.00 mediaserv
 5245 mythtv    20   0 11328 7744  476 S  0.0  0.7   0:00.00 mediaserv
 5246 mythtv    20   0 11328 7744  476 S  0.0  0.7   0:00.00 mediaserv
 5247 mythtv    20   0 11328 7744  476 S  0.0  0.7   0:00.00 mediaserv
 5428 mythtv    20   0  8948 1672 1156 R  0.0  0.2   0:00.51 sshd
 5429 mythtv    20   0  4752 1844 1452 S  0.0  0.2   0:00.02 bash


Here is the dmesg output:
Code:
BIOS EBDA/lowmem at: 0009f800/0009f800
Linux version 2.6.28-LinHES (root@dev) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Nov 1 06:47:02 UTC 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009f800 (usable)
 modified: 000000000009f800 - 00000000000a0000 (reserved)
 modified: 00000000000f0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000003fff0000 (usable)
 modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 modified: 000000003fff3000 - 0000000040000000 (ACPI data)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 3fe31000 - 3ffdf34e
Allocated new RAMDISK: 006af000 - 0085d34e
Move RAMDISK from 000000003fe31000 - 000000003ffdf34d to 006af000 - 0085d34d
ACPI: RSDP 000F9100, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3FFF3180, 63F4 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SRAT 3FFF9680, 0090 (r1 AMD    HAMMER          1 AMD         1)
ACPI: MCFG 3FFF9780, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 3FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
ACPI: Local APIC address 0xfee00000
135MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00006abdc0]    TEXT DATA BSS ==> [0000100000 - 00006abdc0]
  #4 [00006ac000 - 00006af000]    INIT_PG_TABLE ==> [00006ac000 - 00006af000]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #7 [00006af000 - 000085d34e]      NEW RAMDISK ==> [00006af000 - 000085d34e]
  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00f5240] 000f5240
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0003fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
free_area_init_node: node 0, pgdat c054af00, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 272 pages used for memmap
  HighMem zone: 34530 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
Kernel command line: root=/dev/disk/by-uuid/01fbb872-001b-42d1-8495-afe8ea164e1f    ro    init=/sbin/runit    quiet    vga=0x314    splash=silent,theme:linhes    console=tty1   
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2010.280 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 1031120k/1048512k available (3134k kernel code, 16648k reserved, 1419k data, 348k init, 139208k highmem)
virtual kernel memory layout:
    fixmap  : 0xffee8000 - 0xfffff000   (1116 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc057a000 - 0xc05d1000   ( 348 kB)
      .data : 0xc040fbaa - 0xc0572b74   (1419 kB)
      .text : 0xc0100000 - 0xc040fbaa   (3134 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4022.08 BogoMIPS (lpj=6700933)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Brought up 1 CPUs
Total of 1 processors activated (4022.08 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10 io port: [0xff00-0xff1f]
pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10 io port: [0xea00-0xeaff]
pci 0000:00:04.0: reg 14 io port: [0xee00-0xeeff]
pci 0000:00:04.0: reg 18 32bit mmio: [0xfebfd000-0xfebfdfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: reg 20 io port: [0xfb00-0xfb0f]
pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
pci 0000:00:07.0: reg 20 io port: [0xf600-0xf60f]
pci 0000:00:07.0: reg 24 32bit mmio: [0xfebfb000-0xfebfbfff]
pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
pci 0000:00:08.0: reg 20 io port: [0xf100-0xf10f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfebfa000-0xfebfafff]
pci 0000:00:0a.0: reg 10 32bit mmio: [0xfebf9000-0xfebf9fff]
pci 0000:00:0a.0: reg 14 io port: [0xf000-0xf007]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:01:07.0: supports D1 D2
pci 0000:01:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:07.0: PME# disabled
pci 0000:01:0c.0: reg 10 32bit mmio: [0xfeaff000-0xfeaff7ff]
pci 0000:01:0c.0: reg 14 io port: [0xdf00-0xdf7f]
pci 0000:01:0c.0: supports D2
pci 0000:01:0c.0: PME# supported from D2 D3hot D3cold
pci 0000:01:0c.0: PME# disabled
pci 0000:01:0d.0: reg 10 io port: [0xde00-0xde07]
pci 0000:01:0d.0: reg 14 io port: [0xdd00-0xdd03]
pci 0000:01:0d.0: reg 18 io port: [0xdc00-0xdc07]
pci 0000:01:0d.0: reg 1c io port: [0xdb00-0xdb03]
pci 0000:01:0d.0: reg 20 io port: [0xda00-0xda0f]
pci 0000:01:0d.0: reg 24 32bit mmio: [0xfeafe000-0xfeafe3ff]
pci 0000:01:0d.0: reg 30 32bit mmio: [0x000000-0x07ffff]
pci 0000:01:0d.0: supports D1 D2
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0xc000-0xdfff]
pci 0000:00:09.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
pci 0000:00:09.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:02:08.0: reg 10 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:02:09.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff]
pci 0000:01:07.0: bridge io port: [0xc000-0xcfff]
pci 0000:01:07.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:01:07.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:0b.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfe700000-0xfe7fffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfe6fc000-0xfe6fffff]
pci 0000:04:00.0: reg 18 io port: [0xae00-0xaeff]
pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:0c.0: bridge io port: [0xa000-0xafff]
pci 0000:00:0c.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfe500000-0xfe5fffff]
pci 0000:00:0d.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:0d.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfe300000-0xfe3fffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
pci 0000:06:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:06:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:0e.0: bridge io port: [0x8000-0x8fff]
pci 0000:00:0e.0: bridge 32bit mmio: [0xfb000000-0xfdffffff]
pci 0000:00:0e.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:02: ioport range 0xb78-0xb7b has been reserved
system 00:02: ioport range 0xf78-0xf7b has been reserved
system 00:02: ioport range 0xa78-0xa7b has been reserved
system 00:02: ioport range 0xe78-0xe7b has been reserved
system 00:02: ioport range 0xbbc-0xbbf has been reserved
system 00:02: ioport range 0xfbc-0xfbf has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x290-0x30f has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0x3ffeffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved
system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved
system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved
pci 0000:01:07.0: PCI bridge, secondary bus 0000:02
pci 0000:01:07.0:   IO window: 0xc000-0xcfff
pci 0000:01:07.0:   MEM window: 0xfe900000-0xfe9fffff
pci 0000:01:07.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
pci 0000:00:09.0:   IO window: 0xc000-0xdfff
pci 0000:00:09.0:   MEM window: 0xfe900000-0xfeafffff
pci 0000:00:09.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0:   IO window: 0xb000-0xbfff
pci 0000:00:0b.0:   MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:0b.0:   PREFETCH window: 0x000000fe700000-0x000000fe7fffff
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0:   IO window: 0xa000-0xafff
pci 0000:00:0c.0:   MEM window: 0xfe600000-0xfe6fffff
pci 0000:00:0c.0:   PREFETCH window: 0x000000fe500000-0x000000fe5fffff
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
pci 0000:00:0d.0:   IO window: 0x9000-0x9fff
pci 0000:00:0d.0:   MEM window: 0xfe400000-0xfe4fffff
pci 0000:00:0d.0:   PREFETCH window: 0x000000fe300000-0x000000fe3fffff
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:0e.0:   IO window: 0x8000-0x8fff
pci 0000:00:0e.0:   MEM window: 0xfb000000-0xfdffffff
pci 0000:00:0e.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xc000-0xdfff]
bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
bus: 01 index 2 mmio: [0xd8000000-0xdfffffff]
bus: 01 index 3 io port: [0x00-0xffff]
bus: 01 index 4 mmio: [0x000000-0xffffffff]
bus: 02 index 0 io port: [0xc000-0xcfff]
bus: 02 index 1 mmio: [0xfe900000-0xfe9fffff]
bus: 02 index 2 mmio: [0xd8000000-0xdfffffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xfe800000-0xfe8fffff]
bus: 03 index 2 mmio: [0xfe700000-0xfe7fffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xa000-0xafff]
bus: 04 index 1 mmio: [0xfe600000-0xfe6fffff]
bus: 04 index 2 mmio: [0xfe500000-0xfe5fffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 io port: [0x9000-0x9fff]
bus: 05 index 1 mmio: [0xfe400000-0xfe4fffff]
bus: 05 index 2 mmio: [0xfe300000-0xfe3fffff]
bus: 05 index 3 mmio: [0x0-0x0]
bus: 06 index 0 io port: [0x8000-0x8fff]
bus: 06 index 1 mmio: [0xfb000000-0xfdffffff]
bus: 06 index 2 mmio: [0xc0000000-0xcfffffff]
bus: 06 index 3 mmio: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Switched to high resolution mode on CPU 0
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 1720k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1745
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:06:00.0: Boot video device
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: found MSI capability
pcieport-driver 0000:00:0b.0: irq 767 for MSI/MSI-X
pci_express 0000:00:0b.0:pcie00: allocate port service
pci_express 0000:00:0b.0:pcie03: allocate port service
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: found MSI capability
pcieport-driver 0000:00:0c.0: irq 766 for MSI/MSI-X
pci_express 0000:00:0c.0:pcie00: allocate port service
pci_express 0000:00:0c.0:pcie03: allocate port service
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: found MSI capability
pcieport-driver 0000:00:0d.0: irq 765 for MSI/MSI-X
pci_express 0000:00:0d.0:pcie00: allocate port service
pci_express 0000:00:0d.0:pcie03: allocate port service
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: found MSI capability
pcieport-driver 0000:00:0e.0: irq 764 for MSI/MSI-X
pci_express 0000:00:0e.0:pcie00: allocate port service
pci_express 0000:00:0e.0:pcie03: allocate port service
vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d220
vesafb: pmi: set display start = c00cd256, set palette = c00cd2c0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fbcondecor: console 0 using theme 'linhes'
fbcondecor: switched decor state to 'on' on console 0
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
via-rhine: Broken BIOS detected, avoid_D3 enabled.
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:60:e6:c0
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 348k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:07.0: setting latency timer to 64
pata_acpi 0000:00:07.0: PCI INT A disabled
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.3.10
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
sata_sil 0000:01:0d.0: version 2.3
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
sata_sil 0000:01:0d.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
sata_sil 0000:01:0d.0: Applying R_ERR on DMA activate FIS errata fix
scsi2 : sata_sil
scsi3 : sata_sil
scsi4 : sata_sil
scsi5 : sata_sil
ata3: SATA max UDMA/100 mmio m1024@0xfeafe000 tf 0xfeafe080 irq 16
ata4: SATA max UDMA/100 mmio m1024@0xfeafe000 tf 0xfeafe0c0 irq 16
ata5: SATA max UDMA/100 mmio m1024@0xfeafe000 tf 0xfeafe280 irq 16
ata6: SATA max UDMA/100 mmio m1024@0xfeafe000 tf 0xfeafe2c0 irq 16
ata3: SATA link down (SStatus 0 SControl 310)
ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
ata1.00: 390721968 sectors, multi 16: LBA48
ata1.01: ATA-6: ST3200822A, 3.01, max UDMA/100
ata1.01: 390721968 sectors, multi 16: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c6c000) ACPI=0x3f01f (20:20:0x1f)
ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c6c000) ACPI=0x3f01f (20:20:0x1f)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata2.00: ATAPI: AOPEN   DUW1616/ARR, 1000, max UDMA/66
ata2: nv_mode_filter: 0x1f39f&0x701f->0x701f, BIOS=0x7000 (0xc6c6c000) ACPI=0x701f (60:120:0x1b)
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      ST3200822A       3.01 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access     ATA      ST3200822A       3.01 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            AOPEN    DUW1616/ARR      1000 PQ: 0 ANSI: 5
sata_nv 0000:00:07.0: version 3.5
sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:07.0: setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf600 irq 22
ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf608 irq 22
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<4>Driver 'sr' needs updating - please use bus_type methods
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 0:0:1:0: [sdb] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 310)
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata5: SATA link down (SStatus 0 SControl 310)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 310)
ata8: SATA link down (SStatus 0 SControl 300)
sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.0: setting latency timer to 64
scsi8 : sata_nv
scsi9 : sata_nv
ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf100 irq 21
ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf108 irq 21
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
Linux video capture interface: v2.00
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor ACPI_CPU:00: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (22 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 23 (level, low) -> IRQ 23
Intel ICH 0000:00:04.0: setting latency timer to 64
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
intel8x0_measure_ac97_clock: measured 50663 usecs
intel8x0: clocking to 46766
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
usb 2-4: new low speed USB device using ohci_hcd and address 2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ohci1394 0000:01:0c.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
sky2 driver version 1.22
sky2 0000:04:00.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC chip revision 1
usb 2-4: configuration #1 chosen from 1 choice
usb 2-5: new low speed USB device using ohci_hcd and address 3
sky2 0000:04:00.0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
 Part Number: Yukon 88E8052
 Engineering Level: Rev. 1.5
 Manufacturer: Marvell
sky2 0000:04:00.0: irq 763 for MSI/MSI-X
sky2 eth1: addr 00:13:d3:63:a9:ad
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
usb 2-5: configuration #1 chosen from 1 choice
ivtv:  Start initialization, version 1.4.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ivtv 0000:02:08.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Linux agpgart interface v0.103
tveeprom 2-0050: Hauppauge model 23552, rev D592, serial# 8224214
tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio
ivtv0: Autodetected WinTV PVR 500 (unit #1)
nvidia: module license 'NVIDIA' taints kernel.
input: PC Speaker as /class/input/input3
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tea5767 2-0060: type set to Philips TEA5767HN FM Radio
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 57 (Philips FQ1236A MK4)
lp0: using parport0 (interrupt-driven).
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card #0: WinTV PVR 500 (unit #1)
ivtv1: Initializing card #1
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ivtv 0000:02:09.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
PPP generic driver version 2.4.2
ppdev: user-space parallel port driver
tveeprom 3-0050: Hauppauge model 23552, rev D592, serial# 8224214
tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 3-0043: creating new instance
tda9887 3-0043: tda988[5/6/7] found
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
tuner-simple 3-0061: creating new instance
tuner-simple 3-0061: type set to 57 (Philips FQ1236A MK4)
ivtv1: Registered device video1 for encoder MPG (4096 kB)
ivtv1: Registered device video33 for encoder YUV (2048 kB)
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
ivtv1: Registered device video25 for encoder PCM (320 kB)
ivtv1: Initialized card #1: WinTV PVR 500 (unit #2)
ivtv:  End initialization
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc00009e0cfc]
nvidia 0000:06:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:06:00.0: setting latency timer to 64
NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.09  Mon Oct 27 14:23:30 PST 2008
usbcore: registered new interface driver hiddev
input: Itron Powerful Receiver as /class/input/input4
lirc_dev: IR Remote Control driver registered, major 61
lirc_imon: Driver for Soundgraph iMON MultiMedia IR/VFD, v0.4
lirc_imon: Venky Raju <dev@venky.ws>
lirc_imon: imon_probe: found IMON device
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_imon: imon_probe: Registered iMON plugin(minor:0)
lirc_imon: imon_probe: iMON device on usb<2:3> initialized
usbcore: registered new interface driver lirc_imon
generic-usb 0003:195D:7779.0001: input,hidraw0: USB HID v1.00 Mouse [Itron Powerful Receiver] on usb-0000:00:02.0-4/input0
input: Itron Powerful Receiver as /class/input/input5
generic-usb 0003:195D:7779.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [Itron Powerful Receiver] on usb-0000:00:02.0-4/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 498004k swap on /dev/sda2.  Priority:-1 extents:1 across:498004k
fbcondecor: console 0 using theme 'linhes'
fbcondecor: switched decor state to 'on' on console 0
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ivtv 0000:02:08.0: firmware: requesting v4l-cx2341x-enc.fw
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
cx25840 2-0044: firmware: requesting v4l-cx25840.fw
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ivtv 0000:02:09.0: firmware: requesting v4l-cx2341x-enc.fw
ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Encoder revision: 0x02060039
cx25840 3-0044: firmware: requesting v4l-cx25840.fw
eth0: no IPv6 routers present
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[/code]


Last edited by fishbulb15 on Tue Apr 13, 2010 6:02 pm, edited 1 time in total.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 12, 2010 6:18 pm 
Offline
Joined: Sat Oct 15, 2005 11:45 pm
Posts: 25
Please ask a probing question...I am dieing here!
well...here is also something from the /var/local/everything.log:
Code:
Apr 12 19:59:21 mythtv mythfrontend: :: Starting LinHES frontend    [BKGD]
Apr 12 19:59:21 mythtv ntpd[4527]: ntpd 4.2.4p5@1.1541-o Sat Feb  7 19:38:13 UTC 2009 (3)
Apr 12 19:59:21 mythtv ntpd[4527]: precision = 1.000 usec
Apr 12 19:59:21 mythtv ntpd[4527]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Apr 12 19:59:21 mythtv ntpd[4527]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Apr 12 19:59:21 mythtv ntpd[4527]: Listening on interface #1 lo, 127.0.0.1#123 Enabled
Apr 12 19:59:21 mythtv ntpd[4527]: Listening on interface #2 eth0, 192.168.15.3#123 Enabled
Apr 12 19:59:21 mythtv ntpd[4527]: kernel time sync status 0040
Apr 12 19:59:21 mythtv ntpd[4527]: frequency initialized -22.554 PPM from /etc/ntp.drift
Apr 12 19:59:21 mythtv ntpd[4527]: getaddrinfo: "::1" invalid host address, ignored
Apr 12 19:59:22 mythtv nmbd[4494]: [2010/04/12 19:59:22,  0] nmbd/nmbd.c:882(main)
Apr 12 19:59:22 mythtv nmbd[4494]:   standard input is not a socket, assuming -D option
Apr 12 19:59:22 mythtv NET: Registered protocol family 10
Apr 12 19:59:22 mythtv lo: Disabled Privacy Extensions
Apr 12 19:59:22 mythtv mythfrontend:
Apr 12 19:59:22 mythtv mythfrontend: X.Org X Server 1.5.3
Apr 12 19:59:22 mythtv mythfrontend: Release Date: 5 November 2008
Apr 12 19:59:22 mythtv mythfrontend: X Protocol Version 11, Revision 0
Apr 12 19:59:22 mythtv mythfrontend: Build Operating System: Linux 2.6.26-ARCH i686
Apr 12 19:59:22 mythtv mythfrontend: Current Operating System: Linux mythtv 2.6.28-LinHES #1 SMP PREEMPT Sun Nov 1 06:47:02 UTC 2009 i686
Apr 12 19:59:22 mythtv mythfrontend: Build Date: 12 January 2009  10:25:53PM
Apr 12 19:59:22 mythtv mythfrontend: 
Apr 12 19:59:22 mythtv mythfrontend:    Before reporting problems, check http://wiki.x.org
Apr 12 19:59:22 mythtv mythfrontend:    to make sure that you have the latest version.
Apr 12 19:59:22 mythtv mythfrontend: Markers: (--) probed, (**) from config file, (==) default setting,
Apr 12 19:59:22 mythtv mythfrontend:    (++) from command line, (!!) notice, (II) informational,
Apr 12 19:59:22 mythtv mythfrontend:    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Apr 12 19:59:22 mythtv mythfrontend: (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 12 19:59:22 2010
Apr 12 19:59:22 mythtv mythfrontend: (==) Using config file: "/etc/X11/xorg.conf"
Apr 12 19:59:22 mythtv mythfrontend: Parse error on line 1 of section (null) in file /etc/X11/xorg.conf
Apr 12 19:59:22 mythtv mythfrontend:    "Copy" is not a valid keyword in this section.
Apr 12 19:59:22 mythtv mythfrontend: (EE) Problem parsing the config file
Apr 12 19:59:22 mythtv mythfrontend: (EE) Error parsing the config file
Apr 12 19:59:22 mythtv mythfrontend:
Apr 12 19:59:22 mythtv mythfrontend: Fatal server error:
Apr 12 19:59:22 mythtv mythfrontend: no screens found
Apr 12 19:59:23 mythtv smbd[5079]: [2010/04/12 19:59:23,  0] printing/print_cups.c:103(cups_connect)
Apr 12 19:59:23 mythtv smbd[5079]:   Unable to connect to CUPS server localhost:631 - Connection refused
Apr 12 19:59:23 mythtv smbd[5084]: [2010/04/12 19:59:23,  0] printing/print_cups.c:103(cups_connect)
Apr 12 19:59:23 mythtv smbd[5084]:   Unable to connect to CUPS server localhost:631 - Connection refused
Apr 12 19:59:23 mythtv smbd[4391]: [2010/04/12 19:59:23,  0] smbd/server.c:1111(main)
Apr 12 19:59:23 mythtv smbd[4391]:   standard input is not a socket, assuming -D option
Apr 12 19:59:23 mythtv smbd[4391]: [2010/04/12 19:59:23,  0] smbd/server.c:457(smbd_open_one_socket)
Apr 12 19:59:23 mythtv smbd[4391]:   smbd_open_once_socket: open_socket_in: Address already in use
Apr 12 19:59:23 mythtv smbd[4391]: [2010/04/12 19:59:23,  0] smbd/server.c:457(smbd_open_one_socket)
Apr 12 19:59:23 mythtv smbd[4391]:   smbd_open_once_socket: open_socket_in: Address already in use
Apr 12 19:59:25 mythtv ivtv 0000:02:08.0: firmware: requesting v4l-cx2341x-enc.fw
Apr 12 19:59:25 mythtv ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Apr 12 19:59:25 mythtv ivtv0: Encoder revision: 0x02060039
Apr 12 19:59:25 mythtv cx25840 2-0044: firmware: requesting v4l-cx25840.fw
Apr 12 19:59:29 mythtv cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Apr 12 19:59:30 mythtv ivtv 0000:02:09.0: firmware: requesting v4l-cx2341x-enc.fw
Apr 12 19:59:30 mythtv ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Apr 12 19:59:30 mythtv ivtv1: Encoder revision: 0x02060039
Apr 12 19:59:30 mythtv cx25840 3-0044: firmware: requesting v4l-cx25840.fw
Apr 12 19:59:31 mythtv ntpd[4527]: synchronized to 38.229.71.1, stratum 2
Apr 12 19:59:31 mythtv ntpd[4527]: kernel time sync status change 0001
Apr 12 19:59:33 mythtv eth0: no IPv6 routers present
Apr 12 19:59:33 mythtv cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Apr 12 19:59:36 mythtv mythfrontend: giving up.
Apr 12 19:59:36 mythtv mythfrontend: xinit:  No such file or directory (errno 2):  unable to connect to X server
Apr 12 19:59:36 mythtv mythfrontend: xinit:  No such process (errno 3):  Server error.
Apr 12 19:59:36 mythtv mythfrontend:  >  status = 1
Apr 12 19:59:37 mythtv mythfrontend: :: Starting LinHES frontend    [BKGD]
Apr 12 19:59:37 mythtv mythfrontend: X.Org X Server 1.5.3
Apr 12 19:59:37 mythtv mythfrontend: Release Date: 5 November 2008
Apr 12 19:59:37 mythtv mythfrontend: X Protocol Version 11, Revision 0
Apr 12 19:59:37 mythtv mythfrontend: Build Operating System: Linux 2.6.26-ARCH i686
Apr 12 19:59:37 mythtv mythfrontend: Current Operating System: Linux mythtv 2.6.28-LinHES #1 SMP PREEMPT Sun Nov 1 06:47:02 UTC 2009 i686
Apr 12 19:59:37 mythtv mythfrontend: Build Date: 12 January 2009  10:25:53PM
Apr 12 19:59:37 mythtv mythfrontend: 
Apr 12 19:59:37 mythtv mythfrontend:    Before reporting problems, check http://wiki.x.org
Apr 12 19:59:37 mythtv mythfrontend:    to make sure that you have the latest version.
Apr 12 19:59:37 mythtv mythfrontend: Markers: (--) probed, (**) from config file, (==) default setting,
Apr 12 19:59:37 mythtv mythfrontend:    (++) from command line, (!!) notice, (II) informational,
Apr 12 19:59:37 mythtv mythfrontend:    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Apr 12 19:59:37 mythtv mythfrontend: (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 12 19:59:37 2010
Apr 12 19:59:37 mythtv mythfrontend: (==) Using config file: "/etc/X11/xorg.conf"
Apr 12 19:59:37 mythtv mythfrontend: Parse error on line 1 of section (null) in file /etc/X11/xorg.conf
Apr 12 19:59:37 mythtv mythfrontend:    "Copy" is not a valid keyword in this section.
Apr 12 19:59:37 mythtv mythfrontend: (EE) Problem parsing the config file
Apr 12 19:59:37 mythtv mythfrontend: (EE) Error parsing the config file
Apr 12 19:59:37 mythtv mythfrontend:
Apr 12 19:59:37 mythtv mythfrontend: Fatal server error:
Apr 12 19:59:37 mythtv mythfrontend: no screens found
Apr 12 19:59:37 mythtv mythfrontend: xinit:  Server error.
Apr 12 19:59:37 mythtv mythfrontend:  >  status = 1
Apr 12 19:59:38 mythtv mythfrontend: :: Starting LinHES frontend    [BKGD]
Apr 12 19:59:38 mythtv mythfrontend: X.Org X Server 1.5.3
Apr 12 19:59:38 mythtv mythfrontend: Release Date: 5 November 2008
Apr 12 19:59:38 mythtv mythfrontend: X Protocol Version 11, Revision 0
Apr 12 19:59:38 mythtv mythfrontend: Build Operating System: Linux 2.6.26-ARCH i686
Apr 12 19:59:38 mythtv mythfrontend: Current Operating System: Linux mythtv 2.6.28-LinHES #1 SMP PREEMPT Sun Nov 1 06:47:02 UTC 2009 i686
Apr 12 19:59:38 mythtv mythfrontend: Build Date: 12 January 2009  10:25:53PM
Apr 12 19:59:38 mythtv mythfrontend: 
Apr 12 19:59:38 mythtv mythfrontend:    Before reporting problems, check http://wiki.x.org
Apr 12 19:59:38 mythtv mythfrontend:    to make sure that you have the latest version.
Apr 12 19:59:38 mythtv mythfrontend: Markers: (--) probed, (**) from config file, (==) default setting,
Apr 12 19:59:38 mythtv mythfrontend:    (++) from command line, (!!) notice, (II) informational,
Apr 12 19:59:38 mythtv mythfrontend:    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Apr 12 19:59:38 mythtv mythfrontend: (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 12 19:59:38 2010
Apr 12 19:59:38 mythtv mythfrontend: (==) Using config file: "/etc/X11/xorg.conf"
Apr 12 19:59:38 mythtv mythfrontend: Parse error on line 1 of section (null) in file /etc/X11/xorg.conf
Apr 12 19:59:38 mythtv mythfrontend:    "Copy" is not a valid keyword in this section.
Apr 12 19:59:38 mythtv mythfrontend: (EE) Problem parsing the config file
Apr 12 19:59:38 mythtv mythfrontend: (EE) Error parsing the config file
Apr 12 19:59:38 mythtv mythfrontend:
Apr 12 19:59:38 mythtv mythfrontend: Fatal server error:
Apr 12 19:59:38 mythtv mythfrontend: no screens found
Apr 12 19:59:38 mythtv mythfrontend: xinit:  Server error.
Apr 12 19:59:38 mythtv mythfrontend:  >  status = 1
Apr 12 19:59:46 mythtv mythfrontend: timeout: finish: frontend: (pid 5319) 8s, want down
Apr 12 19:59:46 mythtv mythfrontend:  >    Frontend disabled, due to many restarts.
Apr 12 19:59:46 mythtv mythfrontend:  >    Run "sv start frontend" to try again
Apr 12 19:59:46 mythtv mythfrontend:  >     Cleaning up  /etc/sv/frontend/.runtime/
Apr 12 19:59:54 mythtv nmbd[4494]: [2010/04/12 19:59:54,  0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Apr 12 19:59:54 mythtv nmbd[4494]:   *****
Apr 12 19:59:54 mythtv nmbd[4494]:   
Apr 12 19:59:54 mythtv nmbd[4494]:   Samba name server MYTHTV is now a local master browser for workgroup MYGROUP on subnet 192.168.15.3
Apr 12 19:59:54 mythtv nmbd[4494]:   
Apr 12 19:59:54 mythtv nmbd[4494]:   *****


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 13, 2010 3:59 am 
Offline
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location: Adelaide, Australia
look in /var/log/Xorg.0.log for the reason X didnt start. That may give you a clue.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 13, 2010 4:08 am 
Offline
Joined: Thu Dec 07, 2006 10:25 am
Posts: 109
Location: Elgin, Illinois
Quote:
Apr 12 19:59:37 mythtv mythfrontend: Parse error on line 1 of section (null) in file /etc/X11/xorg.conf
Apr 12 19:59:37 mythtv mythfrontend: "Copy" is not a valid keyword in this section.
Apr 12 19:59:37 mythtv mythfrontend: (EE) Problem parsing the config file
Apr 12 19:59:37 mythtv mythfrontend: (EE) Error parsing the config file

I saw this in your error message. So it looks like you have an error in your /etc/X/xorg.conf file. Find the word "Copy" and you should find your error.

_________________
The Atomic Ant.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 13, 2010 5:33 am 
Offline
Joined: Sat Oct 15, 2005 11:45 pm
Posts: 25
Xorg.0.log:

Code:
[mythtv@mythtv ~]$ cat /var/log/Xorg.0.log

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH i686
Current Operating System: Linux mythtv 2.6.28-LinHES #1 SMP PREEMPT Sun Nov 1 06:47:02 UTC 2009 i686
Build Date: 12 January 2009  10:25:53PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 12 23:16:56 2010
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 1 of section (null) in file /etc/X11/xorg.conf
        "Copy" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor

xorg.conf:
Code:
[mythtv@mythtv ~]$ cat /etc/X11/xorg.conf
Copy your config file to /home/mythtv/templates/xorg.user


Code:
[mythtv@mythtv ~]$ cat /home/mythtv/templates/xorg.user
cat: /home/mythtv/templates/xorg.user: No such file or directory


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 13, 2010 5:58 am 
Offline
Joined: Sun Sep 04, 2005 7:48 pm
Posts: 264
Location: Perth, Australia
looks like youve nuked your xorg.conf.
experts will arrive shortly to provide guidance on how to regenerate... something like nvidia-settings.... Nathan

_________________
LinHES: R6 | MB: Asus M3N-H/HDMI | CPU: AMD ??Mhz
Capture: 2xHDHR DVB-T
Graphics: Onboard 8300|PSU: Corsair vx450w
Cooling: Zalman cu?,
Display: Benq xx projector


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 13, 2010 6:18 am 
Offline
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location: Adelaide, Australia
Code:
rm /etc/X11/xorg.conf
nvidia-xconfig
sv start frontend


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 13, 2010 10:49 am 
Offline
Joined: Sat Oct 15, 2005 11:45 pm
Posts: 25
Ran those commands,
Upon reboot now the screen works as it should, but I have lost all mouse and keyboard control. Arrows dont work, NOTHING.
I still have access through SSH though.
Mitch
This is my new xorg.conf:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Mon Oct 27 14:37:20 PST 2008

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection


Top
 Profile  
 
 Post subject: Got it!
PostPosted: Tue Apr 13, 2010 6:02 pm 
Offline
Joined: Sat Oct 15, 2005 11:45 pm
Posts: 25
Other Post
jzigmyth wrote:
Two possible ways out. There should be a xorg.conf.install file that was the original one made by the r6 upgrade. You could take that file and copy the Monitor Section, Device Section and Screen section of the r5.5 file over those sections in the r6 file and make it the xorg.conf file and restart x with "pkill xinit". (by the way, after doing 4 "pkill xinit"s without a reboot in between will hang the frontend process. You can unhang it by "sv restart frontend" for 4 more tries)


I still had the xorg.conf.install file and just copied it over and worked like a charm. Those developers think of everything!

Thanks for everyone's help!
Mitch


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 28, 2010 6:45 pm 
Offline
Joined: Tue Sep 12, 2006 6:03 am
Posts: 210
Location: Roseville, MI
Love the forum.

Thought I nuked my FE install, did a quick search and found the answer. Thanks guys.

_________________
-Roseville, Michigan USA
LinHES R8: FE/BE, FE (x2)


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu