View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 1 post ] 
Print view Previous topic   Next topic  
Author Message
Search for:
 Post subject: Dvico Fusion MCE Remote
PostPosted: Tue Sep 12, 2006 11:24 am 
Offline
Joined: Tue Aug 22, 2006 9:11 am
Posts: 127
Location: Perth
Well after a whole lot of digging and searching I didn't come up much luck in regards to this remote.

So decided to work out how to setup the config myself, as the remote essentially worked, just nothing was mapped.

It's a work in progress, any questions, i'll do my best to answer them.

My modified lircrc config (/home/mythtv/.mythtv/lircrc)

Code:
# lircrc.example.DVICOMCE-irxevent
# 13-09-2006, Leon Wright
# mailto:techman83@gmail.com
# based on lircrc.example.DVICO-irxevent by Jani Talikka
# which was based on lircrc.example.DVICO-nativelirc by Chris Pascoe
# Save this file in ~/.mythtv/lircrc

# Note the "repeat =" strings in the volume and channel.
# This means that if you hold down the key, every nth instance will be
# passed.  This depends on your system, so you may want to increase or
# decrease this and see what happens.  repeat = 1 is probably too
# fast. Example
#begin
#  prog = irxevent
# This is the Blue key
# Use it as a volume key
#  button = blue
#  repeat = 3


begin
    prog = irxevent
    button = tv_onoff
    config = Key Escape CurrentWindow
end

begin
    prog = irxevent
    button = 1
    config = Key 1 CurrentWindow
end

begin
    prog = irxevent
    button = 2
    config = Key 2 CurrentWindow
end

begin
    prog = irxevent
    button = 2
    config = Key 3 CurrentWindow
end

begin
    prog = irxevent
    button = 4
    config = Key 4 CurrentWindow
end

begin
    prog = irxevent
    button = 5
    config = Key 5 CurrentWindow
end

begin
    prog = irxevent
    button = 6
    repeat = 2
    config = Key 6 CurrentWindow
end

begin
    prog = irxevent
    button = 7
    config = Key 7 CurrentWindow
end

begin
    prog = irxevent
    button = 8
    config = Key 8 CurrentWindow
end

begin
    prog = irxevent
    button = 9
    config = Key 9 CurrentWindow
end

begin
    prog = irxevent
    button = 0
    config = Key 0 CurrentWindow
end

begin
    prog = irxevent
    button = up
# This is the "up" on the central diamond
    repeat = 3
    config = Key Up CurrentWindow
end

begin
    prog = irxevent
    button = down
# This is the "down" on the central diamond
    repeat = 3
    config = Key Down CurrentWindow
end

begin
    prog = irxevent
    button = left
 This is the "left" on the central diamond
    repeat = 3
    config = Key Left CurrentWindow
end

begin
    prog = irxevent
    button = right
# This is the "right" on the central diamond
    repeat = 3
    config = Key Right CurrentWindow
end

begin
    prog = irxevent
# Middle button on the diamond
    button = ok
    config = Key Return CurrentWindow
end

begin
    prog = irxevent
    button = mute
    config = Key | CurrentWindow
end

begin
   prog = irxevent
# Change focus for PiP (to change channel in the other window)
   button = alt-tab
   config = Key B CurrentWindow
end

begin
   prog = irxevent
# Toggle PiP on/off
   button = zoom
   config = Key V CurrentWindow
end

# All entries below this line have been customised
# for the DVICO FUSION MCE remote

begin
    prog = irxevent
    button = dvd_menu
    config = Key M CurrentWindow
end

begin
    prog = irxevent
    button = rew
    config = Key Page_Up CurrentWindow
end

begin
    prog = irxevent
    button = stop
    config = Key P CurrentWindow
end

begin
   prog = irxevent
   button = playpause
   config = Key L CurrentWindow
end

begin
    prog = irxevent
    button = ff
    config = Key Page_Down CurrentWindow
end

begin
    prog = irxevent
    button = record
    repeat = 3
    config = Key R CurrentWindow
end

begin
    prog = irxevent
    button = camera
    config = Key ' CurrentWindow
end

begin
   prog = irxevent
   button = replay
   config = Key Q CurrentWindow
end

begin
   prog = irxevent
   button = skip
   config = Key Z CurrentWindow
end

begin
   prog = irxevent
   button = aspect
   config = Key W CurrentWindow
end

# Volume-Up
begin
   prog = irxevent
   button = vol_up
   repeat = 1
   config = Key F11 CurrentWindow
end

# Volume-Down
begin
   prog = irxevent
   button = vol_down
   repeat = 1
   config = Key F10 CurrentWindow
end

# Next Favourite
begin
   prog = irxevent
   button = ch_down
   config = Key / CurrentWindow
end

# Previous Channel
begin
   prog = irxevent
   button = ch_up
   config = Key H CurrentWindow
end

# Bring up OSD info
begin
   prog = irxevent
   button = more
   config = Key I CurrentWindow
end

# MythTV Jump points

# Program Guide
begin
   prog = mythtv
   button = guide
   config = F2
end

# Live TV
begin
   prog = mythtv
   button = dtv
   config = F4
end

# MythMusic
begin
   prog = mythtv
   button = mp3
   config = F6
end

# DVD
begin
   prog = mythtv
   button = dvd
   config = F5
end

# restart mythfrontend
begin
   prog = irexec
   button = power_onoff
   config = restartmyth.sh &
end


After that its a case of making sure all the keys are mapped to the right spots.

Hope this is helpful for someone :) [/code]

_________________
DRM 'manages access' in the same way that jail 'manages freedom.'
_________________
Intel P4 2.6
Intel Desktop Board
2GB DDR400
nVidia 6600GT
Dvico HDTV+
Dvico Dual 4
200GB WD for Swap /boot & /
2x 500GB WD with LVM & XFS for /myth/tv


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu