LinHES Forums http://forum.linhes.org/ |
|
Dvico Fusion MCE Remote http://forum.linhes.org/viewtopic.php?f=3&t=11579 |
Page 1 of 1 |
Author: | techman83 [ Tue Sep 12, 2006 11:24 am ] |
Post subject: | Dvico Fusion MCE Remote |
Well after a whole lot of digging and searching I didn't come up much luck in regards to this remote. So decided to work out how to setup the config myself, as the remote essentially worked, just nothing was mapped. It's a work in progress, any questions, i'll do my best to answer them. My modified lircrc config (/home/mythtv/.mythtv/lircrc) Code: # lircrc.example.DVICOMCE-irxevent # 13-09-2006, Leon Wright # mailto:techman83@gmail.com # based on lircrc.example.DVICO-irxevent by Jani Talikka # which was based on lircrc.example.DVICO-nativelirc by Chris Pascoe # Save this file in ~/.mythtv/lircrc # Note the "repeat =" strings in the volume and channel. # This means that if you hold down the key, every nth instance will be # passed. This depends on your system, so you may want to increase or # decrease this and see what happens. repeat = 1 is probably too # fast. Example #begin # prog = irxevent # This is the Blue key # Use it as a volume key # button = blue # repeat = 3 begin prog = irxevent button = tv_onoff config = Key Escape CurrentWindow end begin prog = irxevent button = 1 config = Key 1 CurrentWindow end begin prog = irxevent button = 2 config = Key 2 CurrentWindow end begin prog = irxevent button = 2 config = Key 3 CurrentWindow end begin prog = irxevent button = 4 config = Key 4 CurrentWindow end begin prog = irxevent button = 5 config = Key 5 CurrentWindow end begin prog = irxevent button = 6 repeat = 2 config = Key 6 CurrentWindow end begin prog = irxevent button = 7 config = Key 7 CurrentWindow end begin prog = irxevent button = 8 config = Key 8 CurrentWindow end begin prog = irxevent button = 9 config = Key 9 CurrentWindow end begin prog = irxevent button = 0 config = Key 0 CurrentWindow end begin prog = irxevent button = up # This is the "up" on the central diamond repeat = 3 config = Key Up CurrentWindow end begin prog = irxevent button = down # This is the "down" on the central diamond repeat = 3 config = Key Down CurrentWindow end begin prog = irxevent button = left This is the "left" on the central diamond repeat = 3 config = Key Left CurrentWindow end begin prog = irxevent button = right # This is the "right" on the central diamond repeat = 3 config = Key Right CurrentWindow end begin prog = irxevent # Middle button on the diamond button = ok config = Key Return CurrentWindow end begin prog = irxevent button = mute config = Key | CurrentWindow end begin prog = irxevent # Change focus for PiP (to change channel in the other window) button = alt-tab config = Key B CurrentWindow end begin prog = irxevent # Toggle PiP on/off button = zoom config = Key V CurrentWindow end # All entries below this line have been customised # for the DVICO FUSION MCE remote begin prog = irxevent button = dvd_menu config = Key M CurrentWindow end begin prog = irxevent button = rew config = Key Page_Up CurrentWindow end begin prog = irxevent button = stop config = Key P CurrentWindow end begin prog = irxevent button = playpause config = Key L CurrentWindow end begin prog = irxevent button = ff config = Key Page_Down CurrentWindow end begin prog = irxevent button = record repeat = 3 config = Key R CurrentWindow end begin prog = irxevent button = camera config = Key ' CurrentWindow end begin prog = irxevent button = replay config = Key Q CurrentWindow end begin prog = irxevent button = skip config = Key Z CurrentWindow end begin prog = irxevent button = aspect config = Key W CurrentWindow end # Volume-Up begin prog = irxevent button = vol_up repeat = 1 config = Key F11 CurrentWindow end # Volume-Down begin prog = irxevent button = vol_down repeat = 1 config = Key F10 CurrentWindow end # Next Favourite begin prog = irxevent button = ch_down config = Key / CurrentWindow end # Previous Channel begin prog = irxevent button = ch_up config = Key H CurrentWindow end # Bring up OSD info begin prog = irxevent button = more config = Key I CurrentWindow end # MythTV Jump points # Program Guide begin prog = mythtv button = guide config = F2 end # Live TV begin prog = mythtv button = dtv config = F4 end # MythMusic begin prog = mythtv button = mp3 config = F6 end # DVD begin prog = mythtv button = dvd config = F5 end # restart mythfrontend begin prog = irexec button = power_onoff config = restartmyth.sh & end After that its a case of making sure all the keys are mapped to the right spots. Hope this is helpful for someone [/code] |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |