Well after a whole lot of digging and searching I didn't come up much luck in regards to this remote.
So decided to work out how to setup the config myself, as the remote essentially worked, just nothing was mapped.
It's a work in progress, any questions, i'll do my best to answer them.
My modified lircrc config (/home/mythtv/.mythtv/lircrc)
Code:
# lircrc.example.DVICOMCE-irxevent
# 13-09-2006, Leon Wright
# mailto:techman83@gmail.com
# based on lircrc.example.DVICO-irxevent by Jani Talikka
# which was based on lircrc.example.DVICO-nativelirc by Chris Pascoe
# Save this file in ~/.mythtv/lircrc
# Note the "repeat =" strings in the volume and channel.
# This means that if you hold down the key, every nth instance will be
# passed. This depends on your system, so you may want to increase or
# decrease this and see what happens. repeat = 1 is probably too
# fast. Example
#begin
# prog = irxevent
# This is the Blue key
# Use it as a volume key
# button = blue
# repeat = 3
begin
prog = irxevent
button = tv_onoff
config = Key Escape CurrentWindow
end
begin
prog = irxevent
button = 1
config = Key 1 CurrentWindow
end
begin
prog = irxevent
button = 2
config = Key 2 CurrentWindow
end
begin
prog = irxevent
button = 2
config = Key 3 CurrentWindow
end
begin
prog = irxevent
button = 4
config = Key 4 CurrentWindow
end
begin
prog = irxevent
button = 5
config = Key 5 CurrentWindow
end
begin
prog = irxevent
button = 6
repeat = 2
config = Key 6 CurrentWindow
end
begin
prog = irxevent
button = 7
config = Key 7 CurrentWindow
end
begin
prog = irxevent
button = 8
config = Key 8 CurrentWindow
end
begin
prog = irxevent
button = 9
config = Key 9 CurrentWindow
end
begin
prog = irxevent
button = 0
config = Key 0 CurrentWindow
end
begin
prog = irxevent
button = up
# This is the "up" on the central diamond
repeat = 3
config = Key Up CurrentWindow
end
begin
prog = irxevent
button = down
# This is the "down" on the central diamond
repeat = 3
config = Key Down CurrentWindow
end
begin
prog = irxevent
button = left
This is the "left" on the central diamond
repeat = 3
config = Key Left CurrentWindow
end
begin
prog = irxevent
button = right
# This is the "right" on the central diamond
repeat = 3
config = Key Right CurrentWindow
end
begin
prog = irxevent
# Middle button on the diamond
button = ok
config = Key Return CurrentWindow
end
begin
prog = irxevent
button = mute
config = Key | CurrentWindow
end
begin
prog = irxevent
# Change focus for PiP (to change channel in the other window)
button = alt-tab
config = Key B CurrentWindow
end
begin
prog = irxevent
# Toggle PiP on/off
button = zoom
config = Key V CurrentWindow
end
# All entries below this line have been customised
# for the DVICO FUSION MCE remote
begin
prog = irxevent
button = dvd_menu
config = Key M CurrentWindow
end
begin
prog = irxevent
button = rew
config = Key Page_Up CurrentWindow
end
begin
prog = irxevent
button = stop
config = Key P CurrentWindow
end
begin
prog = irxevent
button = playpause
config = Key L CurrentWindow
end
begin
prog = irxevent
button = ff
config = Key Page_Down CurrentWindow
end
begin
prog = irxevent
button = record
repeat = 3
config = Key R CurrentWindow
end
begin
prog = irxevent
button = camera
config = Key ' CurrentWindow
end
begin
prog = irxevent
button = replay
config = Key Q CurrentWindow
end
begin
prog = irxevent
button = skip
config = Key Z CurrentWindow
end
begin
prog = irxevent
button = aspect
config = Key W CurrentWindow
end
# Volume-Up
begin
prog = irxevent
button = vol_up
repeat = 1
config = Key F11 CurrentWindow
end
# Volume-Down
begin
prog = irxevent
button = vol_down
repeat = 1
config = Key F10 CurrentWindow
end
# Next Favourite
begin
prog = irxevent
button = ch_down
config = Key / CurrentWindow
end
# Previous Channel
begin
prog = irxevent
button = ch_up
config = Key H CurrentWindow
end
# Bring up OSD info
begin
prog = irxevent
button = more
config = Key I CurrentWindow
end
# MythTV Jump points
# Program Guide
begin
prog = mythtv
button = guide
config = F2
end
# Live TV
begin
prog = mythtv
button = dtv
config = F4
end
# MythMusic
begin
prog = mythtv
button = mp3
config = F6
end
# DVD
begin
prog = mythtv
button = dvd
config = F5
end
# restart mythfrontend
begin
prog = irexec
button = power_onoff
config = restartmyth.sh &
end
After that its a case of making sure all the keys are mapped to the right spots.
Hope this is helpful for someone
[/code]