| LinHES Forums http://forum.linhes.org/ |
|
| Very basic questions about cable vs digital signals http://forum.linhes.org/viewtopic.php?f=5&t=13660 |
Page 1 of 1 |
| Author: | twooten [ Sat Jan 20, 2007 1:02 pm ] |
| Post subject: | Very basic questions about cable vs digital signals |
I've just bought all the hardware needed (I think) to build a MythTV box to the be center of my home entertainment system. I've worked with Linux for a while now but I've never taken the time to mess with digital stuff so I have a basic question. Do I need a separate capture card to be able to pick up and record digital cable? My cable provider is OTelco and I have the basic cable plus digital cable package. With all my hardware set up I am able to pick up all the basic cable channels (2-73) but none of the digital cable channels (200-900) will come in. Now I asked in the forum here a couple days ago why I couldn't pick up any of the higher channels and got two very different responses. One reply was that all I needed to do was connect the outputs of the STB from my cable provider, to the inputs on my capture card (Hauppauge PVR-500). I did that but all I got was static and dark lines on the screen. The next reply to my post was that the first reply was crazy, the PVR-500 is an analogue receiver and you can't pick up digital cable channels with such a card, apparently you have to have another card. I have the following hardware: ASUS A8N32-SLI Deluxe motherboard AMD Athlon 64 3200 processor Ultra V Series 500W power supply 512MB Kingston memory Hauppauge WinTV-PVR-500 MCE tuner NVidia GeForce FX 6600 video card Seagate Ultra ATA100 300GB HD Snapstream Firefly Remote that I hope to get working Please someone tell me what I need to do to pick up and record all the channels that I pay for. If I need a separate card, what is recommended? Thank you, Tim |
|
| Author: | slowtolearn [ Sat Jan 20, 2007 2:00 pm ] |
| Post subject: | Re: Very basic questions about cable vs digital signals |
twooten wrote: I've just bought all the hardware needed (I think) to build a MythTV box to the be center of my home entertainment system. I've worked with Linux for a while now but I've never taken the time to mess with digital stuff so I have a basic question. Do I need a separate capture card to be able to pick up and record digital cable? My cable provider is OTelco and I have the basic cable plus digital cable package. With all my hardware set up I am able to pick up all the basic cable channels (2-73) but none of the digital cable channels (200-900) will come in. Your cable company encrypts the digital channels - There is no tuner card that I am aware of that will decrypt those, you are required to use their STB (set-top box)twooten wrote: Now I asked in the forum here a couple days ago why I couldn't pick up any of the higher channels and got two very different responses. One reply was that all I needed to do was connect the outputs of the STB from my cable provider, to the inputs on my capture card (Hauppauge PVR-500). I did that but all I got was static and dark lines on the screen. The next reply to my post was that the first reply was crazy, the PVR-500 is an analogue receiver and you can't pick up digital cable channels with such a card, apparently you have to have another card. If you are referring to http://mysettopbox.tv/phpBB2/viewtopic.php?t=13599&highlight=digital+stb, i think you misread the responses. ryanpatterson noted what i have already said above, that an analogue tuner can't tune digital channels, even if the cable company didn't encrypt them.
I suspect you'll need to do some more research before this really makes sense. Searching for "digital STB" on these forums should result in many hits, "MythTV digital cable" in Google will get you an overwhelming number of hits. You may want to start here: http://www.htpcnews.com/forums/index.php?showtopic=1932 because it will give you an overview without being too specific, but be sure to look through many of the Google hits. Then you'll be ready to get into the specifics of how to make your STB work with your KM box... |
|
| Author: | twooten [ Sat Jan 20, 2007 2:43 pm ] |
| Post subject: | thanks for the response |
I just scanned the web page you suggested I read and that looks like exactly what I need. I'll go read that and then search the keywords you suggested. I can't wait to get this working, MythTV is awesome. I really like what I've seen so far. I'll update my post with progress. |
|
| Author: | khrusher [ Sun Jan 21, 2007 8:16 pm ] |
| Post subject: | |
to get the digital channels you need to use the tuner on STB. You'll need to use an IRBlaster to allow your mythbox to change the channels on the STB. you need to feed the outpot of the STB into your capture card. there are several config steps you need to do to get all of this working. search for irblaster, digital cable |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|