View unanswered posts    View active topics

Board index KnoppMyth General

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
srcnick
 Post subject: IrBlaster issue on R5F27
PostPosted: Thu Jan 24, 2008 4:30 pm 
Offline
Joined: Sat Feb 18, 2006 1:52 pm
Posts: 4
Hi,

Just did a fresh install of R5F27, ran the irblaster script for my serial port connected irblaster and it doesn't work. I think the problem is with the serial port and not with the irblaster cable box and hardware configuration which is correct.

I've commented out the serial mouse in xorg.conf and it doesn't look like anything else using the serial port: lsof /dev/ttyS0 is empty.

Some info:

Code:
# /etc/irblaster/hardware.conf
#
#  Author: Greg Frost

# The COM Port used by the IRBlaster. Set it to COM1 COM2 or "".
IRBLASTER_SERIAL_PORT=COM1



Code:
dmesg | grep -i ttyS
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A


so it looks like the port is at least recognized.

Code:
dmesg | grep -i lirc*
lirc_dev: IR Remote Control driver registered, at major 61
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0



Code:
cat /proc/interrupts
           CPU0       CPU1       
  0:    1123327          0    IO-APIC-edge  timer
  1:         10          0    IO-APIC-edge  i8042
  6:          3          0    IO-APIC-edge  floppy
  7:          0          0    IO-APIC-edge  parport0
  8:          1          0    IO-APIC-edge  rtc
  9:          1          0   IO-APIC-level  acpi
 14:      86654          0    IO-APIC-edge  ide0
 16:      82542          0   IO-APIC-level  nvidia
 17:       2019          0   IO-APIC-level  sky2, uhci_hcd:usb4, HDA Intel
 18:          0          0   IO-APIC-level  ivtv0
 19:        437          0   IO-APIC-level  ide2, uhci_hcd:usb1
 20:          0          0   IO-APIC-level  libata
 21:         29          0   IO-APIC-level  uhci_hcd:usb2
 22:          0          0   IO-APIC-level  uhci_hcd:usb3
NMI:          0          0
LOC:    1123176    1123157
ERR:          0
MIS:          0



Should I expect to see lirc_serial using something in there?

Any help is greatly appreciated.

thanks,

Nick
Top
 Profile  
 
jmckeown2
 Post subject:
PostPosted: Thu Jan 24, 2008 6:19 pm 
Offline
Joined: Sat Sep 02, 2006 9:17 am
Posts: 359
What about "lsmod | grep lirc"

It looks like you have 2 IR Blasters, a seiral port and a Hauppauge (PVR-150?) It could be the two are getting confused?
Top
 Profile  
 
srcnick
 Post subject:
PostPosted: Thu Jan 24, 2008 6:52 pm 
Offline
Joined: Sat Feb 18, 2006 1:52 pm
Posts: 4
I've got an irblaster from irblaster.info connected to the serial port for changing channels, and I've got an ir receiver connected to a pvr-250 for my remote.

The remote works great.

Code:
lsmod | grep lirc
lirc_serial            16128  0
lirc_i2c               12420  2
lirc_dev               16772  2 lirc_serial,lirc_i2c
i2c_core               20864  19 nvidia,lirc_i2c,i2c_ec,cx88_vp3054_i2c,cx88xx,tda1004x,dvb_bt8xx,bttv,ivtv,saa7115,msp3400,tuner,tea5767,tda8290,tuner_simple,mt20xx,i2c_algo_bit,i2c_i801,tveeprom


thanks,

Nick
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 


Board index KnoppMyth General

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu