View unanswered posts    View active topics

Board index KnoppMyth General

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
DaveQB
 Post subject: S-Video in
PostPosted: Sat Feb 10, 2007 3:57 pm 
Offline
Joined: Sat May 06, 2006 8:20 am
Posts: 41
Location: Sydney, Oz
Me again :D

I have a coax cable supplying my Free-to-Air channels and it works no problems (still haven't tried figuring out schedules etc but eh)

I have my Foxtel running from its RCA out to my S-video in and Line-in. Put on the channel I set it to and can watch it no problems. But go to record and I get this in my logs.


Code:
2007-02-11 08:52:31.290 TVRec(2): Changing from None to RecordingOnly
2007-02-11 08:52:31.300 TVRec(2): HW Tuner: 2->2
2007-02-11 08:52:31.527 Channel::GetCurrentChannelNum(): Failed to find Channel ''
2007-02-11 08:52:31.528 Channel(/dev/video0)::TuneTo(): Error, failed to find channel.
2007-02-11 08:52:31.529 TVRec(2) Error: Failed to set channel to 1. Reverting to kState_None
2007-02-11 08:52:31.530 TVRec(2): Changing from RecordingOnly to None
2007-02-11 08:52:31.579 Canceled recording (Recorder Failed): test recording "Sun Feb 11 08:53:00 2007": channel 1049 on cardid 2, sourceid 2
2007-02-11 08:52:34.672 Error deleting '/myth/video/tv/1049_20070211085300.mpg': No such file or directory
2007-02-11 08:52:35.683 MainServer::HandleAnnounce Monitor
2007-02-11 08:52:35.686 adding: myth as a client (events: 0)
2007-02-11 08:52:40.692 DB Error (Recorded program delete recordedseek):
Query was:
DELETE FROM recordedseek WHERE chanid = '1049' AND starttime = '2007-02-11T08:53:00';
Driver error was [2/145]:
QMYSQL3: Unable to execute query
Database error was:
Table './mythconverg/recordedseek' is marked as crashed and should be repaired





Any hints ?
Did I not set the channel up correctly being as it shouldnt need tuning and I did (to find about 50 working channels, all the same picture of course)

Thanks for reading.
Top
 Profile  
 
bruce_s01
 Post subject:
PostPosted: Sat Feb 10, 2007 8:24 pm 
Offline
Joined: Tue Aug 08, 2006 7:08 pm
Posts: 561
Location: UK
If you don't have some kind of IR-Blaster tell the STB to change channel, you need to put in the "Path to script" text box in "Input connections" in mythtv-setup.
Code:
/bin/true
This returns a dummy value to mythbackend, saying the (non-existant) channel change script has completed.

Bruce S.

_________________
Updated 2019/10/26: AthlonII X2 265 Gigabyte GA-970A-DS3P
16Gb PC 1866 DDR3, 500GB+2TB+4TB SATA HDD,
SATA DVD-RW Asus DRW-24D5MT , NVIDIA GeForce GT1080
Hauppauage Nova-T 500, Nova-T LinHes R8.6.1
Top
 Profile  
 
DaveQB
 Post subject:
PostPosted: Sat Feb 10, 2007 9:39 pm 
Offline
Joined: Sat May 06, 2006 8:20 am
Posts: 41
Location: Sydney, Oz
Ahh so simple.

I will give that a run.

Cheers
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 


Board index KnoppMyth General

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu