LinHES Forums :: View topic - R5E50 Bootsplash progress bar no longer works

#! /bin/sh
#
# rc
#
# Starts/stops services on runlevel changes.
#
# Optimization: A start script is not run when the service was already
# configured to run in the previous runlevel. A stop script is not run
# when the the service was already configured not to run in the previous
# runlevel.
#
# Authors:
# Miquel van Smoorenburg <miquels@cistron.nl>
# Bruce Perens <Bruce@Pixar.com>

PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH

# Un-comment the following for debugging.
# debug=echo

# source the bootsplash config file
test -f /etc/default/bootsplash && . /etc/default/bootsplash

#
# Update bootsplash stuff. (progress bar, animations...)
#

# Specify method used to enable concurrent init.d scripts.
# Valid options are 'none', 'shell' and 'startpar'
CONCURRENCY=none

# Make sure the name survive changing the argument list
scriptname="$0"

umask 022

on_exit() {
echo "error: '$scriptname' exited outside the expected code flow."
}
trap on_exit EXIT # Enable emergency handler

# Ignore CTRL-C only in this shell, so we can interrupt subprocesses.
trap ":" INT QUIT TSTP

# Set onlcr to avoid staircase effect.
stty onlcr 0>&1

# Decide if usplash progress bar should be activated or not.
#if type usplash_write >/dev/null 2>&1; then
# SPLASH=true
#else
# SPLASH=false
#fi
if [ "$SPLASH" = yes ] ; then
SPLASH=true
fi

progress=0
export progress

# Now find out what the current and what the previous runlevel are.

runlevel=$RUNLEVEL
# Get first argument. Set new runlevel to this argument.
[ "$1" != "" ] && runlevel=$1
if [ "$runlevel" = "" ]
then
echo "Usage: $scriptname <runlevel>" >&2
exit 1
fi
previous=$PREVLEVEL
[ "$previous" = "" ] && previous=N

export runlevel previous

. /etc/default/rcS
export VERBOSE

if [ -f /lib/lsb/init-functions ] ; then
. /lib/lsb/init-functions
else
log_daemon_msg() { echo $@; }
fi

#
# Stub to do progress bar ticks (currently just for usplash) on startup
#
startup_progress() {
$@
test "$SPLASH" != "no" && /sbin/splash.sh "$script start"
if [ "$SPLASH" = true ] ; then
step=$(($step + $step_change))
progress=$(($step * $progress_size / $num_steps + $first_step))
# $debug usplash_write "PROGRESS $progress" || true
fi
}

#
# let bootsplash know if we are shutting down or starting up
#
echo "runlevel $runlevel"
if [ "$runlevel" = "S" -o "$runlevel" = "5" -o "$runlevel" = "0" -o "$runlevel" = "6" ]
then
test "$SPLASH" != "no" && /sbin/splash.sh "bootsplash stop"
echo "ok"
fi

#
# Start script or program.
#
case "$CONCURRENCY" in
shell)
log_daemon_msg "Using shell-style concurrent boot"
startup() {
action=$1
shift
scripts="$@"
sh=sh
# Debian Policy Â§9.3.1 requires .sh scripts in runlevel S to be sourced
# However, some important packages currently contain .sh scripts
# that do "exit" at some point, thus killing this process. Bad!
#[ S = "$runlevel" ] && sh=.
backgrounded=0
for script in $scripts ; do
case "$script" in
*.sh)
if [ "." = "$sh" ] ; then
set "$action"
RC_SAVE_PATH="$PATH"
startup_progress $debug . "$script"
PATH="$RC_SAVE_PATH"
else
startup_progress $debug $sh "$script" $action
fi
;;
*)
startup_progress $debug "$script" $action &
backgrounded=1
;;
esac
done
[ 1 = "$backgrounded" ] && wait
}
;;
startpar)
log_daemon_msg "Using startpar-style concurrent boot"
startup() {
action=$1
shift
scripts="$@"
sh=sh
# Debian Policy Â§9.3.1 requires .sh scripts in runlevel S to be sourced
# However, some important packages currently contain .sh scripts
# that do "exit" at some point, thus killing this process. Bad!
#[ S = "$runlevel" ] && sh=.
# Make sure .sh scripts are sourced in runlevel S
if [ "." = "$sh" ] ; then
newscripts=
for script in $scripts ; do
case "$script" in
*.sh)
set "$action"
RC_SAVE_PATH="$PATH"
startup_progress $debug . "$script"
PATH="$RC_SAVE_PATH"
;;
*)
newscripts="$newscripts $script"
;;
esac
done
scripts="$newscripts"
fi

# startpar is not able to handle time jumps. So the
# hwclock.sh scripts should not be executed from
# within startpar. The .sh hack above make this
# problem irrelevant. [pere 2005-09-10]
[ -n "$scripts" ] && startup_progress $debug startpar -a $action $scripts
}
;;
none|*)
startup() {
action=$1
shift
scripts="$@"
sh=sh
# Debian Policy Â§9.3.1 requires .sh scripts in runlevel S to be sourced
# However, some important packages currently contain .sh scripts
# that do "exit" at some point, thus killing this process. Bad!
#[ S = "$runlevel" ] && sh=.
for script in $scripts ; do
case "$script" in
*.sh)
if [ "." = "$sh" ] ; then
set "$action"
RC_SAVE_PATH="$PATH"
startup_progress $debug . "$script"
PATH="$RC_SAVE_PATH"
else
startup_progress $debug $sh "$script" $action
fi
;;
*)
startup_progress $debug "$script" $action
;;
esac
done
}
;;
esac

# Is there an rc directory for this new runlevel?
if [ -d /etc/rc$runlevel.d ]
then
# Find out where in the progress bar the initramfs got to.
PROGRESS_STATE=0
if [ -f /dev/.initramfs/progress_state ]; then
. /dev/.initramfs/progress_state
fi

# Split the remaining portion of the progress bar into thirds
progress_size=$(((100 - $PROGRESS_STATE) / 3))

case "$runlevel" in
0|6)
ACTION=stop
# Count down from 0 to -100 and use the entire bar
first_step=0
progress_size=100
step_change=-1
;;
S)
ACTION=start
# Begin where the initramfs left off and use 2/3
# of the remaining space
first_step=$PROGRESS_STATE
progress_size=$(($progress_size * 2))
step_change=1
;;
*)
ACTION=start
# Begin where rcS left off and use the final 1/3 of
# the space (by leaving progress_size unchanged)
first_step=$(($progress_size * 2 + $PROGRESS_STATE))
step_change=1
;;
esac

if [ "$SPLASH" = true ] ; then
# Count the number of scripts we need to run (for usplash
# progress bar)
num_steps=0
for s in /etc/rc$runlevel.d/[SK]*; do
case "${s##/etc/rc$runlevel.d/S??}" in
gdm|xdm|kdm|ltsp-client|reboot|halt)
break
;;
esac
num_steps=$(($num_steps + 1))
done
step=0
fi

# First, run the KILL scripts.
if [ "$previous" != N ]
then
# Run all scripts with the same level in parallel
CURLEVEL=""
for s in /etc/rc$runlevel.d/K*
do
level=$(echo $s | sed 's/.*\/K$[0-9][0-9]$.*/\1/')
if [ "$level" = "$CURLEVEL" ]
then
continue
fi
CURLEVEL=$level
SCRIPTS=""
for i in /etc/rc$runlevel.d/K$level*
do
# Check if the script is there.
[ ! -f $i ] && continue

#
# Find stop script in previous runlevel but
# no start script there.
#
suffix=${i#/etc/rc$runlevel.d/K[0-9][0-9]}
previous_stop=/etc/rc$previous.d/K[0-9][0-9]$suffix
previous_start=/etc/rc$previous.d/S[0-9][0-9]$suffix
#
# If there is a stop script in the previous level
# and _no_ start script there, we don't
# have to re-stop the service.
#
[ -f $previous_stop ] && [ ! -f $previous_start ] && continue

# Stop the service.
SCRIPTS="$SCRIPTS $i"
done
startup stop $SCRIPTS
done
fi
# Now run the START scripts for this runlevel.
# Run all scripts with the same level in parallel
CURLEVEL=""
# step=0
for s in /etc/rc$runlevel.d/S*
do
level=$(echo $s | sed 's/.*\/S$[0-9][0-9]$.*/\1/')
if [ "$level" = "$CURLEVEL" ]
then
continue
fi
CURLEVEL=$level
SCRIPTS=""
for i in /etc/rc$runlevel.d/S$level*
do
[ ! -f $i ] && continue

if [ "$previous" != N ]
then
#
# Find start script in previous runlevel and
# stop script in this runlevel.
#
suffix=${i#/etc/rc$runlevel.d/S[0-9][0-9]}
stop=/etc/rc$runlevel.d/K[0-9][0-9]$suffix
previous_start=/etc/rc$previous.d/S[0-9][0-9]$suffix
#
# If there is a start script in the previous level
# and _no_ stop script in this level, we don't
# have to re-start the service.
#
[ -f $previous_start ] && [ ! -f $stop ] && progress=$(($progress+2)) && continue
fi
SCRIPTS="$SCRIPTS $i"
done
startup $ACTION $SCRIPTS
done
fi

if [ S = "$runlevel" ]
then
#
# For compatibility, run the files in /etc/rc.boot too.
#
[ -d /etc/rc.boot ] && run-parts /etc/rc.boot
fi

[ $runlevel != "S" ] && /sbin/splash.sh "master" # finish up bootsplash

trap - EXIT # Disable emergency handler

exit 0

Author:	Escher0 [ Sun Jan 14, 2007 1:54 am ]
Post subject:	R5E50 Bootsplash progress bar no longer works
On older versions, the progress bar on my machine worked but ever since the upgrade to R5E50, the progress bar hasn't worked. I tried diving into setting up bootsplash manually but most of it is over my head. I tried updating bootsplash with Code: apt-get install bootsplash and rerunning Code: /usr/local/bin/add_bootsplash.sh but to no avail. I even edited the add_bootsplash script to look at the /etc/bootsplash/themes/current/config/bootsplash-800x600.cfg.working and rerunning but again, nothing. I also tried a different theme downloaded from a site. I'm not really sure where to go from here. I did find this: http://mysettopbox.tv/phpBB2/viewtopic. ... bootsplash but it looks like it may be outdated. Any suggestions? Thanks in advance.

Author:	tjc [ Sun Jan 14, 2007 12:08 pm ]
Post subject:
I think you mean R5E50...

Author:	Escher0 [ Sun Jan 14, 2007 10:52 pm ]
Post subject:
yeah, brain fart.

Author:	cecil [ Sun Jan 14, 2007 11:09 pm ]
Post subject:
Yeah... I thought it more important to release than debug. Perhaps I'll get to it before the next release.

Author:	Escher0 [ Mon Jan 15, 2007 11:10 am ]
Post subject:
ok, so this is a known issue? I only saw a couple mentions of it across the forum so I thought it might have been isolated. thanks.

LinHES Forums http://forum.linhes.org/

R5E50 Bootsplash progress bar no longer works http://forum.linhes.org/viewtopic.php?f=6&t=13500	Page 1 of 2

Author:	maverik044 [ Sat Jan 20, 2007 3:26 pm ]
Post subject:
Here's a mod to get progress bar to work. Works for startup and shutdown Boot message text "Booting system please wait" does not appear. Something that rc starts resets the screen and causes it to disappear. Probably X. Change /etc/init.d/rc for the following (be sure to fix lines that didn't wrap properly in the cut&paste): Code: #! /bin/sh # # rc # # Starts/stops services on runlevel changes. # # Optimization: A start script is not run when the service was already # configured to run in the previous runlevel. A stop script is not run # when the the service was already configured not to run in the previous # runlevel. # # Authors: # Miquel van Smoorenburg <miquels@cistron.nl> # Bruce Perens <Bruce@Pixar.com> PATH=/sbin:/usr/sbin:/bin:/usr/bin export PATH # Un-comment the following for debugging. # debug=echo # source the bootsplash config file test -f /etc/default/bootsplash && . /etc/default/bootsplash # # Update bootsplash stuff. (progress bar, animations...) # # Specify method used to enable concurrent init.d scripts. # Valid options are 'none', 'shell' and 'startpar' CONCURRENCY=none # Make sure the name survive changing the argument list scriptname="$0" umask 022 on_exit() { echo "error: '$scriptname' exited outside the expected code flow." } trap on_exit EXIT # Enable emergency handler # Ignore CTRL-C only in this shell, so we can interrupt subprocesses. trap ":" INT QUIT TSTP # Set onlcr to avoid staircase effect. stty onlcr 0>&1 # Decide if usplash progress bar should be activated or not. #if type usplash_write >/dev/null 2>&1; then # SPLASH=true #else # SPLASH=false #fi if [ "$SPLASH" = yes ] ; then SPLASH=true fi progress=0 export progress # Now find out what the current and what the previous runlevel are. runlevel=$RUNLEVEL # Get first argument. Set new runlevel to this argument. [ "$1" != "" ] && runlevel=$1 if [ "$runlevel" = "" ] then echo "Usage: $scriptname <runlevel>" >&2 exit 1 fi previous=$PREVLEVEL [ "$previous" = "" ] && previous=N export runlevel previous . /etc/default/rcS export VERBOSE if [ -f /lib/lsb/init-functions ] ; then . /lib/lsb/init-functions else log_daemon_msg() { echo $@; } fi # # Stub to do progress bar ticks (currently just for usplash) on startup # startup_progress() { $@ test "$SPLASH" != "no" && /sbin/splash.sh "$script start" if [ "$SPLASH" = true ] ; then step=$(($step + $step_change)) progress=$(($step * $progress_size / $num_steps + $first_step)) # $debug usplash_write "PROGRESS $progress" \|\| true fi } # # let bootsplash know if we are shutting down or starting up # echo "runlevel $runlevel" if [ "$runlevel" = "S" -o "$runlevel" = "5" -o "$runlevel" = "0" -o "$runlevel" = "6" ] then test "$SPLASH" != "no" && /sbin/splash.sh "bootsplash stop" echo "ok" fi # # Start script or program. # case "$CONCURRENCY" in shell) log_daemon_msg "Using shell-style concurrent boot" startup() { action=$1 shift scripts="$@" sh=sh # Debian Policy Â§9.3.1 requires .sh scripts in runlevel S to be sourced # However, some important packages currently contain .sh scripts # that do "exit" at some point, thus killing this process. Bad! #[ S = "$runlevel" ] && sh=. backgrounded=0 for script in $scripts ; do case "$script" in .sh) if [ "." = "$sh" ] ; then set "$action" RC_SAVE_PATH="$PATH" startup_progress $debug . "$script" PATH="$RC_SAVE_PATH" else startup_progress $debug $sh "$script" $action fi ;; ) startup_progress $debug "$script" $action & backgrounded=1 ;; esac done [ 1 = "$backgrounded" ] && wait } ;; startpar) log_daemon_msg "Using startpar-style concurrent boot" startup() { action=$1 shift scripts="$@" sh=sh # Debian Policy Â§9.3.1 requires .sh scripts in runlevel S to be sourced # However, some important packages currently contain .sh scripts # that do "exit" at some point, thus killing this process. Bad! #[ S = "$runlevel" ] && sh=. # Make sure .sh scripts are sourced in runlevel S if [ "." = "$sh" ] ; then newscripts= for script in $scripts ; do case "$script" in .sh) set "$action" RC_SAVE_PATH="$PATH" startup_progress $debug . "$script" PATH="$RC_SAVE_PATH" ;; ) newscripts="$newscripts $script" ;; esac done scripts="$newscripts" fi # startpar is not able to handle time jumps. So the # hwclock.sh scripts should not be executed from # within startpar. The .sh hack above make this # problem irrelevant. [pere 2005-09-10] [ -n "$scripts" ] && startup_progress $debug startpar -a $action $scripts } ;; none\|) startup() { action=$1 shift scripts="$@" sh=sh # Debian Policy Â§9.3.1 requires .sh scripts in runlevel S to be sourced # However, some important packages currently contain .sh scripts # that do "exit" at some point, thus killing this process. Bad! #[ S = "$runlevel" ] && sh=. for script in $scripts ; do case "$script" in .sh) if [ "." = "$sh" ] ; then set "$action" RC_SAVE_PATH="$PATH" startup_progress $debug . "$script" PATH="$RC_SAVE_PATH" else startup_progress $debug $sh "$script" $action fi ;; ) startup_progress $debug "$script" $action ;; esac done } ;; esac # Is there an rc directory for this new runlevel? if [ -d /etc/rc$runlevel.d ] then # Find out where in the progress bar the initramfs got to. PROGRESS_STATE=0 if [ -f /dev/.initramfs/progress_state ]; then . /dev/.initramfs/progress_state fi # Split the remaining portion of the progress bar into thirds progress_size=$(((100 - $PROGRESS_STATE) / 3)) case "$runlevel" in 0\|6) ACTION=stop # Count down from 0 to -100 and use the entire bar first_step=0 progress_size=100 step_change=-1 ;; S) ACTION=start # Begin where the initramfs left off and use 2/3 # of the remaining space first_step=$PROGRESS_STATE progress_size=$(($progress_size 2)) step_change=1 ;; ) ACTION=start # Begin where rcS left off and use the final 1/3 of # the space (by leaving progress_size unchanged) first_step=$(($progress_size 2 + $PROGRESS_STATE)) step_change=1 ;; esac if [ "$SPLASH" = true ] ; then # Count the number of scripts we need to run (for usplash # progress bar) num_steps=0 for s in /etc/rc$runlevel.d/[SK]; do case "${s##/etc/rc$runlevel.d/S??}" in gdm\|xdm\|kdm\|ltsp-client\|reboot\|halt) break ;; esac num_steps=$(($num_steps + 1)) done step=0 fi # First, run the KILL scripts. if [ "$previous" != N ] then # Run all scripts with the same level in parallel CURLEVEL="" for s in /etc/rc$runlevel.d/K do level=$(echo $s \| sed 's/.\/K\([0-9][0-9]\)./\1/') if [ "$level" = "$CURLEVEL" ] then continue fi CURLEVEL=$level SCRIPTS="" for i in /etc/rc$runlevel.d/K$level* do # Check if the script is there. [ ! -f $i ] && continue # # Find stop script in previous runlevel but # no start script there. # suffix=${i#/etc/rc$runlevel.d/K[0-9][0-9]} previous_stop=/etc/rc$previous.d/K[0-9][0-9]$suffix previous_start=/etc/rc$previous.d/S[0-9][0-9]$suffix # # If there is a stop script in the previous level # and _no_ start script there, we don't # have to re-stop the service. # [ -f $previous_stop ] && [ ! -f $previous_start ] && continue # Stop the service. SCRIPTS="$SCRIPTS $i" done startup stop $SCRIPTS done fi # Now run the START scripts for this runlevel. # Run all scripts with the same level in parallel CURLEVEL="" # step=0 for s in /etc/rc$runlevel.d/S* do level=$(echo $s \| sed 's/.\/S\([0-9][0-9]\)./\1/') if [ "$level" = "$CURLEVEL" ] then continue fi CURLEVEL=$level SCRIPTS="" for i in /etc/rc$runlevel.d/S$level* do [ ! -f $i ] && continue if [ "$previous" != N ] then # # Find start script in previous runlevel and # stop script in this runlevel. # suffix=${i#/etc/rc$runlevel.d/S[0-9][0-9]} stop=/etc/rc$runlevel.d/K[0-9][0-9]$suffix previous_start=/etc/rc$previous.d/S[0-9][0-9]$suffix # # If there is a start script in the previous level # and _no_ stop script in this level, we don't # have to re-start the service. # [ -f $previous_start ] && [ ! -f $stop ] && progress=$(($progress+2)) && continue fi SCRIPTS="$SCRIPTS $i" done startup $ACTION $SCRIPTS done fi if [ S = "$runlevel" ] then # # For compatibility, run the files in /etc/rc.boot too. # [ -d /etc/rc.boot ] && run-parts /etc/rc.boot fi [ $runlevel != "S" ] && /sbin/splash.sh "master" # finish up bootsplash trap - EXIT # Disable emergency handler exit 0

Author:	maverik044 [ Mon Jan 29, 2007 8:57 pm ]
Post subject:
rc file above has been updated for those interested

Author:	Escher0 [ Mon Jan 29, 2007 9:51 pm ]
Post subject:
Thanks, I just plugged in the file, I'll let you know how it goes.

Author:	Dak48 [ Tue Jan 30, 2007 7:43 am ]
Post subject:
Quote: Yeah... I thought it more important to release than debug. Perhaps I'll get to it before the next release. So we noticed. I'm gonna have the balls to say this, I like KM, but Jesus, R5E50 is full of bugs and little gotchas. How about next time, we place importance on debugging instead of releasing a buggy version?

Author:	maverik044 [ Tue Jan 30, 2007 7:37 pm ]
Post subject:
hey come on lets not start a flame war here. I think the KnoppMyth team has done a tremendous job, and all at no cost to the users.

Author:	cecil [ Wed Jan 31, 2007 12:32 pm ]
Post subject:
Dak48 wrote: So we noticed. I'm gonna have the balls to say this, I like KM, but Jesus, R5E50 is full of bugs and little gotchas. How about next time, we place importance on debugging instead of releasing a buggy version? Ok smart guy. Put up or shut up. What are you doing to improve KnoppMyth? I tried to get the progress bar working, however it cause more problems. So, I opted to leave it be in E50 and work on it in a future release. There is nothing buggy about E50 because of the lack of a progress bar. The system still boots and that is the bottom line. So, if you like KnoppMyth and want to see it improve, contribute.

Author:	Lofty [ Sat Feb 03, 2007 7:19 am ]
Post subject:	Still no progress bar and now no boot!
I tried to apply this fix to my fresh R5E50 install and found that it just prevented my sytem from fully starting up and didn't fix the progress bar situation. Am I the only one having this issue? Has anyone successfully used this fix to correct the non-functioning progress bar in R5E50?

Author:	Escher0 [ Sat Feb 03, 2007 7:58 pm ]
Post subject:	Re: Still no progress bar and now no boot!
Lofty wrote: I tried to apply this fix to my fresh R5E50 install and found that it just prevented my sytem from fully starting up and didn't fix the progress bar situation. Am I the only one having this issue? Has anyone successfully used this fix to correct the non-functioning progress bar in R5E50? same thing happened to me. do we need to run lilo after applying this?

Author:	cecil [ Mon Feb 05, 2007 2:17 am ]
Post subject:
It was missing # from the first line. Take another look. Tested and implemented. maverik044 thanks for doing the legwork.

Page 1 of 2	All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/

Author:	Escher0 [ Mon Feb 05, 2007 11:54 am ]
Post subject:
I just tried plugging it in again and again it prevents a full boot. I forgot to write down what the error is but it says something like "INIT:subsystem "c7" replying to fast"