| LinHES Forums http://forum.linhes.org/ |
|
| Green Screen and WinTV Go Plus http://forum.linhes.org/viewtopic.php?f=6&t=13892 |
Page 1 of 1 |
| Author: | cdblack [ Sun Jan 28, 2007 12:03 am ] |
| Post subject: | Green Screen and WinTV Go Plus |
I have a WinTv Go Plus and no matter what I tried I am getting a green screen. I had been working until I installed updated nVidia drivers and change the display setting. I have the line "options bttv card=10 tuner=39" in the KnoppMyth file. I also reinstalled the entire KnoppMyth CD and still the same thing. Doesn't work. Does anyone have any ideas how to fix this, I am getting frustrated and not sure what to do. |
|
| Author: | tjc [ Sun Jan 28, 2007 1:16 am ] |
| Post subject: | |
You may want to go back and delete the other one. Use the [X] in the upper right hand corner (following [Quote] and [Edit]) of your posting there. |
|
| Author: | cdblack [ Sun Jan 28, 2007 7:03 pm ] |
| Post subject: | dmesg |
This is my output for dmesg, I hope someone can help me. root@mythtv:~# dmesg | grep bttv bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 18, latency: 64, mmio: 0xf8001000 bttv0: using: Hauppauge (bt878) [card=10,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] bttv0: Hauppauge eeprom indicates model#0 bttv0: using tuner=39 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: PLL can sleep, using XTAL (28636363). |
|
| Author: | cdblack [ Mon Jan 29, 2007 3:59 pm ] |
| Post subject: | Infromation / Topic |
I just want to know if I should post any more information to help diagnose this problem, in addition did I post this under the correct location. |
|
| Author: | cdblack [ Tue Jan 30, 2007 1:21 am ] |
| Post subject: | Additonal Information |
Some more information So half the time when I restart the computer and when you do dmesg the line below reads #0 and the other half it is as it reads. Hauppauge eeprom indicates model#44981 And if the line reads as displayed I get a green screen when I try to watch TV and when I do dmesg I get the message below. tuner 1-0061: i2c i/o error: rc == -121 (should be 4) |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|